| 1. |
- Aminoroaya, Alireza, et al.
(författare)
-
A Review of Dental Composites : Methods Of Characterizations
- 2020
-
Ingår i: ACS Biomaterials Science & Engineering. - : American Chemical Society (ACS). - 2373-9878. ; 6:7, s. 3713-3744
-
Forskningsöversikt (refereegranskat)abstract
- Dental composites are becoming increasingly popular in esthetic restorative dentistry and present a promising substitute for amalgam. However, the major hurdles that hinder their total adoption in restorative dentistry are limited longevity and possible health risks, leading to significant attempts for addressing these shortcomings. Besides the new materials, the evaluation methods play a critical role in the introduction and improvement of these types of materials. This review aims to cover the characterization methods in the evaluation of dental composites that are most employed nowadays. Therefore, the methods for evaluating the physical properties of the dental composites are first explained. Subsequently, the assessment methods of curing kinetics and the mechanical properties of the composites are classified and reviewed. Afterward, the article delves into the introduction and classification of the microscopic and antibacterial evaluation methods. Finally, the test methods for assessment of in vitro cytotoxicity and self-healing ability are described. It should be noted, for each test method, the most recent and interesting articles are cited. It is envisaged that this review will facilitate an understanding and provide knowledge for the section and utilizing the most effective and suitable characterization methods for future research on the development of dental composites.
|
|
| 2. |
- Babu, Karthik, et al.
(författare)
-
A Review on the Flammability Properties of Carbon-Based Polymeric Composites : State-of-the-Art and Future Trends
- 2020
-
Ingår i: Polymers. - : MDPI. - 2073-4360. ; 12:7
-
Forskningsöversikt (refereegranskat)abstract
- Carbon based fillers have attracted a great deal of interest in polymer composites because of their ability to beneficially alter properties at low filler concentration, good interfacial bonding with polymer, availability in different forms, etc. The property alteration of polymer composites makes them versatile for applications in various fields, such as constructions, microelectronics, biomedical, and so on. Devastations due to building fire stress the importance of flame-retardant polymer composites, since they are directly related to human life conservation and safety. Thus, in this review, the significance of carbon-based flame-retardants for polymers is introduced. The effects of a wide variety of carbon-based material addition (such as fullerene, CNTs, graphene, graphite, and so on) on reaction-to-fire of the polymer composites are reviewed and the focus is dedicated to biochar-based reinforcements for use in flame retardant polymer composites. Additionally, the most widely used flammability measuring techniques for polymeric composites are presented. Finally, the key factors and different methods that are used for property enhancement are concluded and the scope for future work is discussed.
|
|
| 3. |
|
|
| 4. |
- Das, Oisik, et al.
(författare)
-
Naturally-occurring bromophenol to develop fire retardant gluten biopolymers
- 2020
-
Ingår i: Journal of Cleaner Production. - : Elsevier. - 0959-6526 .- 1879-1786. ; 243
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of the study was to impart fire retardancy in wheat gluten polymer through naturally-occurring additives such as lanosol. The fire properties of lanosol were compared with two other conventional brominated fire retardants (Tetrabromobisphenol A and Hexabromocyclododecane). Samples containing fire retardants and gluten were prepared through compression moulding process and then characterised for their fire and mechanical properties. All fire retardants enhanced the reaction-to-fire and thermal properties of gluten while generating V-0 (i.e. vertical position and self-extinguished) ratings in the UL-94 test. The presence of all the fire retardants increased the modulus of the gluten polymer but the fire retardant particles were detrimental for the tensile strength. Nevertheless, lanosol addition delayed ignition and lowered peak heat release rate of gluten by the maximum amount, thereby leading to relatively higher fire performance index (compared to the other fire retardants). Lanosol also allowed the gluten to create a dense char barrier layer during burning that impeded the transfer of heat and flammable volatiles. The fact that only 4 wt% lanosol was able to cause self-extinguishment under direct flame and reduce peak heat release rate by a significant 50% coupled with its inherent occurrence in nature, raises the question if lanosol can be a potential fire retardant in polymeric systems, although it is a bromophenol.
|
|
| 5. |
- Das, Oisik, et al.
(författare)
-
The Effect of Carbon Black on the Properties of Plasticised Wheat Gluten Biopolymer
- 2020
-
Ingår i: Molecules. - : MDPI. - 1431-5157 .- 1420-3049. ; 25:10
-
Tidskriftsartikel (refereegranskat)abstract
- Wheat gluten biopolymers generally become excessively rigid when processed without plasticisers, while the use of plasticisers, on the other hand, can deteriorate their mechanical properties. As such, this study investigated the effect of carbon black (CB) as a filler into glycerol-plasticised gluten to prepare gluten/CB biocomposites in order to eliminate the aforementioned drawback. Thus, biocomposites were manufactured using compression moulding followed by the determination of their mechanical, morphological, and chemical properties. The filler content of 4 wt% was found to be optimal for achieving increased tensile strength by 24%, and tensile modulus by 268% along with the toughness retention based on energy at break when compared with those of glycerol-plasticised gluten. When reaching the filler content up to 6 wt%, the tensile properties were found to be worsened, which can be ascribed to excessive agglomeration of carbon black at the high content levels within gluten matrices. Based on infrared spectroscopy, the results demonstrate an increased amount of β-sheets, suggesting the formation of more aggregated protein networks induced by increasing the filler contents. However, the addition of fillers did not improve fire and water resistance in such bionanocomposites owing to the high blend ratio of plasticiser to gluten.
|
|
| 6. |
- Das, Oisik, et al.
(författare)
-
The need for fully bio-based facemasks to counter coronavirus outbreaks : A perspective
- 2020
-
Ingår i: Science of the Total Environment. - : Elsevier. - 0048-9697 .- 1879-1026. ; 736
-
Tidskriftsartikel (refereegranskat)abstract
- The onset of coronavirus pandemic has sparked a shortage of facemasks in almost all nations. Without this personal protective equipment, healthcare providers, essential workers, and the general public are exposed to the risk of infection. In light of the aforementioned, it is critical to balance the supply and demand for masks. COVID-19 will also ensure that masks are always considered as an essential commodity in future pandemic preparedness. Moreover, billions of facemasks are produced from petrochemicals derived raw materials, which are non-degradable upon disposal after their single use, thus causing environmental pollution and damage. The sustainable way forward is to utilise raw materials that are side-stream products of local industries to develop facemasks having equal or better efficiency than the conventional ones. In this regard, wheat gluten biopolymer, which is a by-product or co-product of cereal industries, can be electrospun into nanofibre membranes and subsequently carbonised at over 700 °C to form a network structure, which can simultaneously act as the filter media and reinforcement for gluten-based masks. In parallel, the same gluten material can be processed into cohesive thin films using plasticiser and hot press. Additionally, lanosol, a naturally-occurring substance, imparts fire (V-0 rating in vertical burn test), and microbe resistance in gluten plastics. Thus, thin films of flexible gluten with very low amounts of lanosol (<10 wt%) can be bonded together with the carbonised mat and shaped by thermoforming to create the facemasks. The carbon mat acting as the filter can be attached to the masks through adapters that can also be made from injection moulded gluten. The creation of these masks could simultaneously be effective in reducing the transmittance of infectious diseases and pave the way for environmentally benign sustainable products.
|
|
| 7. |
- Jiang, Lin, et al.
(författare)
-
Pyrolytic Kinetics of Polystyrene Particle in Nitrogen Atmosphere : Particle Size Effects and Application of Distributed Activation Energy Method
- 2020
-
Ingår i: Polymers. - : MDPI. - 2073-4360. ; 12:2
-
Tidskriftsartikel (refereegranskat)abstract
- This work was motivated by a study of particle size effects on pyrolysis kinetics and models of polystyrene particle. Micro-size polystyrene particles with four different diameters, 5, 10, 15, and 50 µm, were selected as experimental materials. Activation energies were obtained by isoconversional methods, and pyrolysis model of each particle size and heating rate was examined through different reaction models by the Coats–Redfern method. To identify the controlling model, the Avrami–Eroféev model was identified as the controlling pyrolysis model for polystyrene pyrolysis. Accommodation function effect was employed to modify the Avrami–Eroféev model. The model was then modified to f(α) = nα0.39n − 1.15(1 − α)[−ln(1 − α)]1 − 1/n, by which the polystyrene pyrolysis with different particle sizes can be well explained. It was found that the reaction model cannot be influenced by particle geometric dimension. The reaction rate can be changed because the specific surface area will decrease with particle diameter. To separate each step reaction and identify their distributions to kinetics, distributed activation energy method was introduced to calculate the weight factor and kinetic triplets. Results showed that particle size has big impacts on both first and second step reactions. Smaller size particle can accelerate the process of pyrolysis reaction. Finally, sensitivity analysis was brought to check the sensitivity and weight of each parameter in the model.
|
|
| 8. |
- Khosravi, Fatemeh, et al.
(författare)
-
Development of a Highly Proliferated Bilayer Coating on 316L Stainless Steel Implants
- 2020
-
Ingår i: Polymers. - : MDPI. - 2073-4360. ; 12:5
-
Tidskriftsartikel (refereegranskat)abstract
- In this research, a bilayer coating has been applied on the surface of 316 L stainless steel (316LSS) to provide highly proliferated metallic implants for bone regeneration. The first layer was prepared using electrophoretic deposition of graphene oxide (GO), while the top layer was coated utilizing electrospinning of poly (ε-caprolactone) (PCL)/gelatin (Ge)/forsterite solutions. The morphology, porosity, wettability, biodegradability, bioactivity, cell attachment and cell viability of the prepared coatings were evaluated. The Field Emission Scanning Electron Microscopy (FESEM) results revealed the formation of uniform, continuous, and bead-free nanofibers. The Energy Dispersive X-ray (EDS) results confirmed well-distributed forsterite nanoparticles in the structure of the top coating. The porosity of the electrospun nanofibers was found to be above 70%. The water contact angle measurements indicated an improvement in the wettability of the coating by increasing the amount of nanoparticles. Furthermore, the electrospun nanofibers containing 1 and 3 wt.% of forsterite nanoparticles showed significant bioactivity after soaking in the simulated body fluid (SBF) solution for 21 days. In addition, to investigate the in vitro analysis, the MG-63 cells were cultured on the PCL/Ge/forsterite and GO-PCL/Ge/forsterite coatings. The results confirmed an excellent cell adhesion along with considerable cell growth and proliferation. It should be also noted that the existence of the forsterite nanoparticles and the GO layer substantially enhanced the cell proliferation of the coatings.
|
|
| 9. |
- Kim, N. K., et al.
(författare)
-
Fire-retardancy and mechanical performance of protein-based natural fibre-biopolymer composites
- 2020
-
Ingår i: Composites Part C: Open Access. - : Elsevier BV. - 2666-6820. ; 1
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of the present work was to comprehend the fire retardant and mechanical properties of protein based natural fibre and biopolymer composites. Wool fibre and wheat gluten as environmentally sustainable materials were selected as fibre reinforcement and polymer matrix, respectively. With the use of the Taguchi design-of-experiment tool, it was possible to identify the desired combinations of the selective factors: wool/plasticiser (glycerol) contents and processing temperature, to improve the composites properties. Pareto ANOVA indicated that the wool content was the most important factor (ca. 78%) to influence the peak heat release rate due to its charring competency. On the other hand, the content of plasticiser significantly affected the tensile strength of the composites. Of particular importance was that the addition of 30 wt% wool to the gluten polymer, having no flame retardant, was sufficient to achieve a self-extinguishing flame during the vertical burn test (V-1) and improve the composite's strength.
|
|
| 10. |
- Malekkhouyan, Roya, et al.
(författare)
-
Preparation and Characterization of Electrosprayed Nanocapsules Containing Coconut-Oil-Based Alkyd Resin for the Fabrication of Self-Healing Epoxy Coatings
- 2020
-
Ingår i: Applied Sciences. - : MDPI. - 2076-3417. ; 10:9
-
Tidskriftsartikel (refereegranskat)abstract
- In the present study, the preparation of nanocapsules using the coaxial electrospraying method was investigated. Poly(styrene-co-acrylonitrile) (SAN) was used as a shell material and coconut-oil-based alkyd resin (CAR) as a core. Chemical structure, thermal stability, and morphology of nanocapsules were characterized by Fourier transform infrared (FTIR) spectroscopy, thermal gravimetric analysis (TGA), and field emission scanning electron microscopy (FE-SEM), respectively. In addition, the formation of the core–shell structure was approved by transmission electron microscopy (TEM) and FE-SEM micrographs of the fractured nanocapsules. Furthermore, differential scanning calorimetry tests (DSC) were carried out to investigate the reactivity of released healing agents from the nanocapsules. The prepared nanocapsules were then incorporated into the epoxy resins and applied on the surfaces of the steel panels. The effect of capsule incorporation on the properties of the coating was evaluated. The self-healing performance of the coatings in the salty and acidic media was also assessed. The FTIR results revealed the presence of both shell and core in the prepared nanocapsules and proved that no reaction occurred between them. The morphological studies confirmed that the electrosprayed nanocapsules’ mean diameter was 708 ± 252 nm with an average shell thickness of 82 nm. The TGA test demonstrated the thermal stability of nanocapsules to be up to 270 °C while the DSC results reveal a successful reaction between CAR and epoxy resin, especially in the acidic media. The electrochemical impedance spectroscopy (EIS) test results demonstrate that the best self-healing performance was achieved for the 2 and 1 wt.% nanocapsules incorporation in the NaCl, and HCl solution, respectively.
|
|
