SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Deng G) srt2:(2005-2009)"

Sökning: WFRF:(Deng G) > (2005-2009)

  • Resultat 1-10 av 14
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Schael, S, et al. (författare)
  • Precision electroweak measurements on the Z resonance
  • 2006
  • Ingår i: Physics Reports. - : Elsevier BV. - 0370-1573 .- 1873-6270. ; 427:5-6, s. 257-454
  • Forskningsöversikt (refereegranskat)abstract
    • We report on the final electroweak measurements performed with data taken at the Z resonance by the experiments operating at the electron-positron colliders SLC and LEP. The data consist of 17 million Z decays accumulated by the ALEPH, DELPHI, L3 and OPAL experiments at LEP, and 600 thousand Z decays by the SLID experiment using a polarised beam at SLC. The measurements include cross-sections, forward-backward asymmetries and polarised asymmetries. The mass and width of the Z boson, m(Z) and Gamma(Z), and its couplings to fermions, for example the p parameter and the effective electroweak mixing angle for leptons, are precisely measured: m(Z) = 91.1875 +/- 0.0021 GeV, Gamma(Z) = 2.4952 +/- 0.0023 GeV, rho(l) = 1.0050 +/- 0.0010, sin(2)theta(eff)(lept) = 0.23153 +/- 0.00016. The number of light neutrino species is determined to be 2.9840 +/- 0.0082, in agreement with the three observed generations of fundamental fermions. The results are compared to the predictions of the Standard Model (SM). At the Z-pole, electroweak radiative corrections beyond the running of the QED and QCD coupling constants are observed with a significance of five standard deviations, and in agreement with the Standard Model. Of the many Z-pole measurements, the forward-backward asymmetry in b-quark production shows the largest difference with respect to its SM expectation, at the level of 2.8 standard deviations. Through radiative corrections evaluated in the framework of the Standard Model, the Z-pole data are also used to predict the mass of the top quark, m(t) = 173(+10)(+13) GeV, and the mass of the W boson, m(W) = 80.363 +/- 0.032 GeV. These indirect constraints are compared to the direct measurements, providing a stringent test of the SM. Using in addition the direct measurements of m(t) and m(W), the mass of the as yet unobserved SM Higgs boson is predicted with a relative uncertainty of about 50% and found to be less than 285 GeV at 95% confidence level. (c) 2006 Elsevier B.V. All rights reserved.
  •  
2.
  • Ablikim, M., et al. (författare)
  • Measurements of (XcJ)-> K+K-K+K- decays
  • 2006
  • Ingår i: Physics Letters B. - : Elsevier BV. - 0370-2693 .- 1873-2445. ; 642:3, s. 197-202
  • Tidskriftsartikel (refereegranskat)abstract
    • Using 14M psi(2S) events taken with the BESII detector, chi(cJ) -> 2(K+K-) decays are studied. For the four-kaon final state, the branching fractions are B(chi(c0,1,2) ->.2(K+K-)) = (3.48 +/- 0.23 +/- 0.47) x 10(-3), (0.70 +/- 0.13 +/- 0.10) x 10(-3), and (2.17 +/- 0.20 +/- 0.31) x 10(-3). For the phi K+K- final state, the branching fractions, which are measured for the first time, are B(chi(c0,1,2) -> phi K+K-) = (1.03 +/- 0.22 +/- 0.15) x 10(-3), (0.46 +/- 0.16 +/- 0.06) x 10(-3), and (1.67 +/- 0.26 +/- 0.24) x 10(-4). For the phi phi final state, B(chi(c0,2) -> phi phi) = (0.94 +/- 0.21 +/- 0.13) x 10(-3) and (1.70 +/- 0.30 +/- 0.25) x 10(-3).
  •  
3.
  • Schaap, M., et al. (författare)
  • Standardized evaluation methodology and reference database for evaluating coronary artery centerline extraction algorithms
  • 2009
  • Ingår i: Medical Image Analysis. - : Elsevier. - 1361-8415 .- 1361-8423. ; 13:5, s. 701-714
  • Tidskriftsartikel (refereegranskat)abstract
    • Efficiently obtaining a reliable coronary artery centerline from computed tomography angiography data is relevant in clinical practice. Whereas numerous methods have been presented for this purpose, up to now no standardized evaluation methodology has been published to reliably evaluate and compare the performance of the existing or newly developed coronary artery centerline extraction algorithms. This paper describes a standardized evaluation methodology and reference database for the quantitative evaluation of coronary artery centerline extraction algorithms. The contribution of this work is fourfold: (1) a method is described to create a consensus centerline with multiple observers, (2) well-defined measures are presented for the evaluation of coronary artery centerline extraction algorithms, (3) a database containing 32 cardiac CTA datasets with corresponding reference standard is described and made available, and (4) 13 coronary artery centerline extraction algorithms, implemented by different research groups, are quantitatively evaluated and compared. The presented evaluation framework is made available to the medical imaging community for benchmarking existing or newly developed coronary centerline extraction algorithms.
  •  
4.
  • Berman, F., et al. (författare)
  • New grid scheduling and rescheduling methods in the GrADS Project
  • 2005
  • Ingår i: International journal of parallel programming. - : Springer Science and Business Media LLC. - 0885-7458 .- 1573-7640. ; 33:3-Feb, s. 209-229
  • Tidskriftsartikel (refereegranskat)abstract
    • The goal of the Grid Application Development Software (GrADS) Project is to provide programming tools and an execution environment to ease program development for the Grid. This paper presents recent extensions to the GrADS software framework: a new approach to scheduling workflow computations, applied to a 3-D image reconstruction application; a simple stop/migrate/restart approach to rescheduling Grid applications, applied to a QR factorization benchmark; and a process-swapping approach to rescheduling, applied to an N-body simulation. Experiments validating these methods were carried out on both the GrADS MacroGrid (a small but functional Grid) and the MicroGrid (a controlled emulation of the Grid).
  •  
5.
  •  
6.
  • Deng, X. H., et al. (författare)
  • Dynamics and waves near multiple magnetic null points in reconnection diffusion region
  • 2009
  • Ingår i: Journal of Geophysical Research. - : Blackwell Publishing. - 0148-0227 .- 2156-2202. ; 114:7
  • Tidskriftsartikel (refereegranskat)abstract
    • Identifying the magnetic structure in the region where the magnetic field lines break and how reconnection happens is crucial to improving our understanding of three-dimensional reconnection. Here we show the in situ observation of magnetic null structures in the diffusion region, the dynamics, and the associated waves. Possible spiral null pair has been identified near the diffusion region. There is a close relation among the null points, the bipolar signature of the Z component of the magnetic field, and enhancement of the flux of energetic electrons up to 100 keV. Near the null structures, whistler-mode waves were identified by both the polarity and the power law of the spectrum of electric and magnetic fields. It is found that the angle between the fans of the nulls is quite close to the theoretically estimated maximum value of the group-velocity cone angle for the whistler wave regime of reconnection.
  •  
7.
  • Dirksen, A., et al. (författare)
  • Exploring the role of CT densitometry: a randomised study of augmentation therapy in alpha(1)-antitrypsin deficiency
  • 2009
  • Ingår i: European Respiratory Journal. - : European Respiratory Society (ERS). - 1399-3003 .- 0903-1936. ; 33:6, s. 1345-1353
  • Tidskriftsartikel (refereegranskat)abstract
    • Assessment of emphysema-modifying therapy is difficult, but newer outcome measures offer advantages over traditional methods. The EXAcerbations and Computed Tomography scan as Lung End-points (EXACTLE) trial explored the use of computed tomography (CT) densitometry and exacerbations for the assessment of the therapeutic effect of augmentation therapy in subjects with alpha(1)-antitrypsin (alpha(1)-AT) deficiency. In total, 77 subjects (protease inhibitor type Z) were randomised to weekly infusions of 60 mg.kg(-1) human alpha(1)-AT (Prolastin (R)) or placebo for 2-2.5 yrs. The primary end-point was change in CT lung density, and an exploratory approach was adopted to identify optimal methodology, including two methods of adjustment for lung volume variability and two statistical approaches. Other end-points were exacerbations, health status and physiological indices. CT was more sensitive than other measures of emphysema progression, and the changes in CT and forced expiratory volume in 1 s were correlated. All methods of densitometric analysis concordantly showed a trend suggestive of treatment benefit (p-values for Prolastin (R) versus placebo ranged 0.049-0.084). Exacerbation frequency was unaltered by treatment, but a reduction in exacerbation severity was observed. In patients with alpha(1)-AT deficiency, CT is a more sensitive outcome measure of emphysema-modifying therapy than physiology and health status, and demonstrates a trend of treatment benefit from alpha(1)-AT augmentation.
  •  
8.
  • Parr, David G., et al. (författare)
  • Exploring the optimum approach to the use of CT densitometry in a randomised placebo-controlled study of augmentation therapy in alpha 1-antitrypsin deficiency
  • 2009
  • Ingår i: Respiratory Research. - : Springer Science and Business Media LLC. - 1465-9921 .- 1465-993X. ; 10
  • Tidskriftsartikel (refereegranskat)abstract
    • Background: Computed tomography (CT) lung densitometry has been demonstrated to be the most sensitive and specific outcome measure for the assessment of emphysema-modifying therapy, but the optimum densitometric index has yet to be determined and targeted sampling may be more sensitive than whole lung assessment. The EXAcerbations and CT scan as Lung Endpoints (EXACTLE) trial aimed to clarify the optimum approach to the use of CT densitometry data for the assessment of alpha 1-antitrypsin (AAT) augmentation therapy on the progression of emphysema in AAT deficiency (AATD). Methods: Patients with AATD (n = 77) were randomised to weekly infusions of 60 mg/kg human AAT (Prolastin (R)) or placebo over 2 to 2.5 years. Lung volume was included as a covariate in an endpoint analysis and a comparison was made of different CT densitometric indices (15th percentile lung density [PD15], mean lung density [MLD] and voxel index at a threshold of -910 [VI-910] and -950 [VI-950] Hounsfield Units) obtained from whole lung scans at baseline and at 24 to 30 months. Targeted regional sampling was compared with whole lung assessment. Results: Whole lung analysis of the total change (baseline to last CT scan) compared with placebo indicated a concordant trend that was suggestive of a treatment effect for all densitometric indices (MLD [1.402 g/L, p = 0.204]; VI-910 [-0.611, p = 0.389]; VI-950 [-0.432, p = 0.452]) and that was significant using PD15 (1.472 g/L, p = 0.049). Assessment of the progression of emphysema in the apical, middle and basal regions of the lung by measurement with PD15 showed that this treatment effect was more evident when the basal third was sampled (1.722 g/L, p = 0.040). A comparison between different densitometric indices indicated that the influence of inspiratory variability between scans was greatest for PD15, but when adjustment for lung volume was made this index was the most sensitive measure of emphysema progression. Conclusion: PD15 is the most sensitive index of emphysema progression and of treatment modification. Targeted sampling may be more sensitive than whole lung analysis. Trial registration: Registered in ClinicalTrials.gov as 'Antitrypsin (AAT) to Treat Emphysema in AAT-Deficient Patients'; ClinicalTrials.gov Identifier: NCT00263887.
  •  
9.
  • Pu, Y., et al. (författare)
  • Investigation into nanocellulosics versus acacia reinforced acrylic films
  • 2007
  • Ingår i: Composites Part B: Engineering. - : Elsevier BV. - 1359-8368. ; 38:3, s. 360-366
  • Tidskriftsartikel (refereegranskat)abstract
    • Three closely related cellulosic acrylic latex films were prepared employing acacia pulp fibers, cellulose whiskers and nanocellulose balls and their respective strength properties were determined. Cellulose whisker reinforced composites had enhanced strength properties compared to the acacia pulp and nanoball composites. AFM analysis indicated that the cellulose whisker reinforced composite exhibited decreased surface roughness. Published by Elsevier Ltd.
  •  
10.
  • Rutter, Nick, et al. (författare)
  • Evaluation of forest snow processes models (SnowMIP2)
  • 2009
  • Ingår i: Journal of Geophysical Research. - : American Geophysical Union (AGU). - 0148-0227 .- 2156-2202. ; 114:6
  • Tidskriftsartikel (refereegranskat)abstract
    • Thirty-three snowpack models of varying complexity and purpose were evaluated across a wide range of hydrometeorological and forest canopy conditions at five Northern Hemisphere locations, for up to two winter snow seasons. Modeled estimates of snow water equivalent (SWE) or depth were compared to observations at forest and open sites at each location. Precipitation phase and duration of above-freezing air temperatures are shown to be major influences on divergence and convergence of modeled estimates of the subcanopy snowpack. When models are considered collectively at all locations, comparisons with observations show that it is harder to model SWE at forested sites than open sites. There is no universal "best'' model for all sites or locations, but comparison of the consistency of individual model performances relative to one another at different sites shows that there is less consistency at forest sites than open sites, and even less consistency between forest and open sites in the same year. A good performance by a model at a forest site is therefore unlikely to mean a good model performance by the same model at an open site (and vice versa). Calibration of models at forest sites provides lower errors than uncalibrated models at three out of four locations. However, benefits of calibration do not translate to subsequent years, and benefits gained by models calibrated for forest snow processes are not translated to open conditions.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-10 av 14

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy