| 1. |
- Ahmed, Taha, 1984-
(författare)
-
Nanostructured ZnO and metal chalcogenide films for solar photocatalysis
- 2023
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The increasing demand for clean energy and safe water resources has driven the development of efficient and sustainable technologies. Among these technologies, photocatalysis using semiconducting materials has emerged as a promising solution for both solar hydrogen generation and water purification. Low-dimensional ZnO, including nanorods, nanoparticles, and quantum confined particles (so called quantum dots), has demonstrated excellent photocatalytic properties due to their large surface area, high electron mobility, and tunable band gap.The work in this thesis aims to investigate the potential of low-dimensional ZnO alone and in combination with CdS and Fe2O3 for solar hydrogen generation and photocatalytic water purification. The thesis includes a comprehensive analysis of the synthesis, characterization, and optimization of low-dimensional ZnO-based photocatalyst systems for solar hydrogen generation and photocatalytic water purification. Additionally, the thesis will evaluate the performance of the ZnO-based photocatalysts under different experimental conditions, either as photoelectrodes or as distributed particle systems for water purification. The work includes detailed size control of ZnO by itself in dimensions below 10 nm using a hydrothermal method, to provide an increased total surface area and introduce quantum confinement effects that increase the band gap to enable degradation of chemical bonds in a model pollutant in a distributed system for water purification. The work also includes a relatively detailed study of the phonon–phonon and electron–phonon coupling as a function of dimension from 10 nm to 150 nm for ZnO using non-resonant and resonant Raman spectroscopy. Ultimately, the thesis aims to provide insight into the potential of low-dimensional ZnO alone and in combination with other inorganic materials for solar hydrogen generation and photocatalytic water purification and pave the way for the development of efficient and sustainable technologies for clean energy and safe water resources.
|
|
| 2. |
- Ahmed, Taha, et al.
(författare)
-
Optical Quantum Confinement in Ultrasmall ZnO and the Effect of Size on Their Photocatalytic Activity
- 2020
-
Ingår i: The Journal of Physical Chemistry C. - : AMER CHEMICAL SOC. - 1932-7447 .- 1932-7455. ; 124:11, s. 6395-6404
-
Tidskriftsartikel (refereegranskat)abstract
- Zinc oxide is a well-known metal oxide semiconductor with a wide direct band gap that offers a promising alternative to titanium oxide in photocatalytic applications. ZnO is studied here as quantum dots (QDs) in colloidal suspensions, where ultrasmall nanoparticles of ZnO show optical quantum confinement with a band gap opening for particles below 9 nm in diameter from the shift of the band edge energies. The optical properties of growing ZnO QDs are determined with Tauc analysis, and a system of QDs for the treatment and degradation of distributed threats is analyzed using an organic probe molecule, methylene blue, whose UV/vis spectrum is analyzed in some detail. The effect of optical properties of the QDs and the kinetics of dye degradation are quantified for low-dimensional ZnO materials in the range of 3-8 nm and show a substantial increase in photocatalytic activity compared to larger ZnO particles. This is attributed to a combined effect from the increased surface area as well as a quantum confinement effect that goes beyond the increased surface area. The results show a significantly higher photocatalytic activity for the QDs between 3 and 6 nm with a complete decolorization of the organic probe molecule, while QDs from 6 nm and upward in diameter show signs of competing reduction reactions. Our study shows that ultrasmall ZnO particles have a reactivity beyond that which is expected because of their increased surface area and also demonstrates size-dependent reaction pathways, which introduces the possibility for size-selective catalysis.
|
|
| 3. |
- Araujo, Rafael B., et al.
(författare)
-
High-entropy alloy catalysts : Fundamental aspects, promises towards electrochemical NH3 production, and lessons to learn from deep neural networks
- 2023
-
Ingår i: Nano Energy. - : Elsevier. - 2211-2855 .- 2211-3282. ; 105
-
Tidskriftsartikel (refereegranskat)abstract
- A computational approach to judiciously predict high-entropy alloys (HEAs) as an efficient and sustainable material class for the electrochemical reduction of nitrogen is here presented. The approach employs density functional theory (DFT), adsorption energies of N atoms and N2 molecules as descriptors of the catalytic activity and deep neural networks. A probabilistic approach to quantifying the activity of HEA catalysts for nitrogen reduction reaction (NRR) is described, where catalyst elements and concentration are optimized to increase the probability of specific atomic arrangements on the surfaces. The approach provides key features for the effective filtering of HEA candidates without the need for time-consuming calculations. The relationships between activity and selectivity, which correlate with the averaged valence electron concentration and averaged electronegativity of the reference HEA catalyst, are analyzed in terms of sufficient interaction for sustained reactions and, at the same time, for the release of the active site. As a result, a complete list of 3000 HEAs consisting of quinary components of the elements Mo, Cr, Mn, Fe, Co, Ni, Cu, and Zn are reported together with their metrics to rank them from the most likely to the least likely active catalysts for NRR in gas diffusion electrodes, or for the case where non-aqueous electrolytes are utilized to suppress the competing hydrogen evolution reaction. Moreover, the energetic landscape of the electrochemical NRR transformations are computed and compared to the case of Fe. The study also analyses and discusses how the results would translate to liquid-solid reactions in aqueous electrochemical cells, further affected by changes in properties upon hydroxylation, oxygen, hydrogen, and water coverages.
|
|
| 4. |
- Araujo, Rafael, et al.
(författare)
-
N-2 adsorption on high-entropy alloy surfaces : unveiling the role of local environments
- 2023
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 11:24, s. 12973-12983
-
Tidskriftsartikel (refereegranskat)abstract
- Developing highly active catalysts to electrochemically reduce N-2 to NH3 under ambient conditions is challenging but bears the promise of using ammonia as a potential energy vector in sustainable energy technology. One of the scientific challenges concerns the inertness of N-2 emanating from the highly stable triple bonds and the lack of dipole moments, making N-2 fixation on catalytic surfaces difficult. Another critical challenge is that electrons are more prone to reduce hydrogen than N-2 at the surface, forming a scaling relationship where the reduction ability of the catalyst most often benefits hydrogen reduction instead of nitrogen reduction. Here we show that high-entropy alloys (HEA) - a new class of catalysts with vast compositional and structural possibilities, can enhance N-2 fixation. More specifically, we investigate the role of the local environment in the first and second solvation shell of the adsorbing elements in the bond strength between the dinitrogen molecules and the HEA surfaces. Density functional theory using a Bayesian error estimation functional and vdW interactions is employed to clarify the properties dictating the local bonding. The results show that although the main property calibrating the N-2 bond strength is the d-band centers of the adsorbing elements, the value of the d-band centers of the adsorbing elements is further regulated by their local environment, mainly from the elements in the first solvation shell due to electron donor-acceptor interactions. Therefore, there exists a first solvation shell effect of the adsorbing elements on the bond strength between N-2 molecules and the surface of HEAs. The results show that apart from the direct active site, the indirect relation adds further modulation abilities where the local interactions with a breath of metallic elements could be used in HEAs to engineer specific surface environments. This is utilized here to form a strategy for delivering higher bond strength with the N-2 molecules, mitigating the fixation issue. The analysis is corroborated by correlation analysis of the properties affecting the interaction, thus forming a solid framework of the model, easily extendable to other chemical reactions and surface interaction problems.
|
|
| 5. |
- Araujo, Rafael, et al.
(författare)
-
Supervised AI and Deep Neural Networks to Evaluate High-Entropy Alloys as Reduction Catalysts in Aqueous Environments
- 2024
-
Ingår i: ACS Catalysis. - : American Chemical Society (ACS). - 2155-5435. ; 14:6, s. 3742-3755
-
Tidskriftsartikel (refereegranskat)abstract
- Competitive surface adsorption energies on catalytic surfaces constitute a fundamental aspect of modeling electrochemical reactions in aqueous environments. The conventional approach to this task relies on applying density functional theory, albeit with computationally intensive demands, particularly when dealing with intricate surfaces. In this study, we present a methodological exposition of quantifying competitive relationships within complex systems. Our methodology leverages quantum-mechanical-guided deep neural networks, deployed in the investigation of quinary high-entropy alloys composed of Mo-Cr-Mn-Fe-Co-Ni-Cu-Zn. These alloys are under examination as prospective electrocatalysts, facilitating the electrochemical synthesis of ammonia in aqueous media. Even in the most favorable scenario for nitrogen fixation identified in this study, at the transition from O and OH coverage to surface hydrogenation, the probability of N2 coverage remains low. This underscores the fact that catalyst optimization alone is insufficient for achieving efficient nitrogen reduction. In particular, these insights illuminate that system consideration with oxygen- and hydrogen-repelling approaches or high-pressure solutions would be necessary for improved nitrogen reduction within an aqueous environment.
|
|
| 6. |
- Bayrak Pehlivan, Ilknur, et al.
(författare)
-
Electrochromic solar water splitting using a cathodic WO3 electrocatalyst
- 2021
-
Ingår i: Nano Energy. - : Elsevier. - 2211-2855 .- 2211-3282. ; 81
-
Tidskriftsartikel (refereegranskat)abstract
- Solar-driven water splitting is an emerging technology with high potential to generate fuel cleanly and sustainably. In this work, we show that WO3 can be used as a cathodic electrocatalyst in combination with (Ag,Cu) InGaSe2 solar cell modules to produce hydrogen and provide electrochromic functionality to water splitting devices. This electrochromic effect can be used to monitor the charge state or performance of the catalyst for process control or for controlling the temperature and absorbed heat due to tunable optical modulation of the electrocatalyst. WO3 films coated on Ni foam, using a wide range of different sputtering conditions, were investigated as cathodic electrocatalysts for the water splitting reaction. The solar-to-hydrogen (STH) efficiency of solar-driven water electrolysis was extracted using (Ag,Cu)InGaSe2 solar cell modules with a cell band gap varied in between 1.15 and 1.25 eV with WO3 on Ni foam-based electrolyzers and yielded up to 13% STH efficiency. Electrochromic properties during water electrolysis were characterized for the WO3 films on transparent substrate (indium tin oxide). Transmittance varied between 10% and 78% and the coloration efficiency at a wavelength of 528 nm and the overpotential of 400 mV was 40 cm(2) C-1. Hydrogen ion consumption in ion intercalation for electrochromic and hydrogen gas production for water electrolysis processes was discussed.
|
|
| 7. |
- Bayrak Pehlivan, Ilknur, et al.
(författare)
-
NiMoV and NiO-based catalysts for efficient solar-driven water splitting using thermally integrated photovoltaics in a scalable approach
- 2021
-
Ingår i: iScience. - : Cell Press. - 2589-0042. ; 24:1
-
Tidskriftsartikel (refereegranskat)abstract
- In this work, a trimetallic NiMoV catalyst is developed for the hydrogen evolution reaction and characterized with respect to structure, valence, and elemental distribution. The overpotential to drive a 10 mA cm−2 current density is lowered from 94 to 78 mV versus reversible hydrogen electrode by introducing V into NiMo. A scalable stand-alone system for solar-driven water splitting was examined for a laboratory-scale device with 1.6 cm2 photovoltaic (PV) module area to an up-scaled device with 100 cm2 area. The NiMoV cathodic catalyst is combined with a NiO anode in alkaline electrolyzer unit thermally connected to synthesized (Ag,Cu) (In,Ga)Se2 ((A)CIGS) PV modules. Performance of 3- and 4-cell interconnected PV modules, electrolyzer, and hydrogen production of the PV electrolyzer are examined between 25°C and 50°C. The PV-electrolysis device having a 4-cell (A)CIGS under 100 mW cm−2 illumination and NiMoV-NiO electrolyzer shows 9.1% maximum and 8.5% averaged efficiency for 100 h operation.
|
|
| 8. |
- Bayrak Pehlivan, Ilknur, et al.
(författare)
-
Scalable and thermally-integrated solar water-splitting modules using Ag-doped Cu(In,Ga)Se2 and NiFe layered double hydroxide nanocatalysts
- 2022
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 10:22, s. 12079-12091
-
Tidskriftsartikel (refereegranskat)abstract
- Photovoltaic (PV) electrolysis is an important and powerful technology for environmentally-friendly fuel production based on solar energy. By directly coupling solar cell materials to electrochemical systems to perform water electrolysis, solar energy can be converted into hydrogen fuel utilizing locally-generated heat and avoid losses from DC-DC convertors and power grid transmission. Although there have been significant contributions to the photoelectrochemical and PV-electrolysis field using isolated laboratory cells, the capacity to upscale and retain high levels of efficiency in larger modules remains a critical issue for widespread use and application. In this study, we develop thermally-integrated, solar-driven water-splitting device modules using AgCu(In,Ga)Se2 (ACIGS) and an alkaline electrolyzer system with NiFe-layered double hydroxide (LDH) nanocatalysts with devices of 82-100 cm2 area. The Ga-content in the ACIGS solar cells is tuned to achieve an optimal voltage for the catalyst system, and the average efficiencies and durability of the PV-electrolyzer were tested in up to seven-day indoor and 21 day outdoor operations. We achieved a solar-to-hydrogen (STH) module efficiency of 13.4% from gas volume measurements for the system with a six-cell CIGS-electrolyzer module with an active area of 82.3 cm2 and a 17.27% PV module efficiency under 100 mW cm−2 illumination, and thus 77% electricity-to-hydrogen efficiency at one full sun. Outdoor tests under mid-Europeen winter conditions exhibited an STH efficiency between 10 and 11% after the initial activation at the installation site in Jülich, Germany, in December 2020, despite challenging outdoor-test weather conditions, including sub-zero temperatures.
|
|
| 9. |
- Bayrak Pehlivan, Ilknur, et al.
(författare)
-
The climatic response of thermally integrated photovoltaic-electrolysis water splitting using Si and CIGS combined with acidic and alkaline electrolysis
- 2020
-
Ingår i: Sustainable Energy & Fuels. - : ROYAL SOC CHEMISTRY. - 2398-4902. ; 4:12, s. 6011-6022
-
Tidskriftsartikel (refereegranskat)abstract
- The Horizon 2020 project PECSYS aims to build a large area demonstrator for hydrogen production from solar energy via integrated photovoltaic (PV) and electrolysis systems of different types. In this study, Si- and CIGS-based photovoltaics are developed together with three different electrolyzer systems for use in the corresponding integrated devices. The systems are experimentally evaluated and a general model is developed to investigate the hydrogen yield under real climatic conditions for various thin film and silicon PV technologies and electrolyser combinations. PV characteristics using a Si heterojunction (SHJ), thin film CuInxGa1-xSe2, crystalline Si with passivated emitter rear totally diffused and thin film Si are used together with temperature dependent catalyst load curves from both acidic and alkaline approaches. Electrolysis data were collected from (i) a Pt-IrO2-based acidic electrolysis system, and (ii) NiMoW-NiO-based and (iii) Pt-Ni foam-based alkaline electrolysis systems. The calculations were performed for mid-European climate data from Julich, Germany, which will be the installation site. The best systems show an electricity-to-hydrogen conversion efficiency of 74% and over 12% solar-to-hydrogen (STH) efficiencies using both acidic and alkaline approaches and are validated with a smaller lab scale prototype. The results show that the lower power delivered by all the PV technologies under low irradiation is balanced by the lower demand for overpotentials for all the electrolysis approaches at these currents, with more or less retained STH efficiency over the full year if the catalyst area is the same as the PV area for the alkaline approach. The total yield of hydrogen, however, follows the irradiance, where a yearly hydrogen production of over 35 kg can be achieved for a 10 m(2) integrated PV-electrolysis system for several of the PV and electrolyser combinations that also allow a significant (100-fold) reduction in necessary electrolyser area for the acidic approach. Measuring the catalyst systems under intermittent and ramping conditions with different temperatures, a 5% lowering of the yearly hydrogen yield is extracted for some of the catalyst systems while the Pt-Ni foam-based alkaline system showed unaffected or even slightly increased yearly yield under the same conditions.
|
|
| 10. |
- Benesperi, Iacopo, et al.
(författare)
-
Dynamic dimer copper coordination redox shuttles
- 2022
-
Ingår i: Chem. - : Elsevier. - 2451-9308 .- 2451-9294. ; 8:2, s. 439-449
-
Tidskriftsartikel (refereegranskat)abstract
- Summary Conventional redox mediators based on metal coordination complexes undergo electron transfer through the change in oxidation state of the metal center. However, electron transfer kinetics are offset toward preferred oxidation states when preorganized ligands constrain the reorganization of the coordination sphere. In contrast, we report here on dimeric copper(II/I) redox couples, wherein the extent of oxidation/reduction of two metal centers dictates the dynamic formation of dimer and monomer complexes: the dimeric (Cu(I))2 transitions to monomers of Cu(II). The bis(thiazole/pyrrole)-bipyridine tetradentate ligands stabilize both oxidation states of the unique redox systems. The dynamic dimer redox mediators offer a viable two-electron redox mechanism to develop efficient hybrid solar cells through inhibited recombination and rapid charge transport. Density functional theory calculations reveal inner reorganization energies for single-electron transfer as low as 0.27 eV, marking the dimeric complexes superior redox systems over single complexes as liquid and potentially solid-state electrolytes.
|
|
