| 1. |
- Aad, G., et al.
(författare)
-
Observation of Single-Top-Quark Production in Association with a Photon Using the ATLAS Detector
- 2023
-
Ingår i: Physical Review Letters. - : American Physical Society (APS). - 0031-9007 .- 1079-7114. ; 131:18
-
Tidskriftsartikel (refereegranskat)abstract
- This Letter reports the observation of single top quarks produced together with a photon, which directly probes the electroweak coupling of the top quark. The analysis uses 139 fb−1 of 13 TeV proton-proton collision data collected with the ATLAS detector at the Large Hadron Collider. Requiring a photon with transverse momentum larger than 20 GeV and within the detector acceptance, the fiducial cross section is measured to be 688±23(stat) , to be compared with the standard model prediction of at next-to-leading order in QCD.
|
|
| 2. |
- Aad, G., et al.
(författare)
-
Study of Z→llγ decays at s = 8 TeV with the ATLAS detector
- 2024
-
Ingår i: European Physical Journal C. - : Springer. - 1434-6044 .- 1434-6052. ; 84:2
-
Tidskriftsartikel (refereegranskat)abstract
- This paper presents a study of Z→llγ decays with the ATLAS detector at the Large Hadron Collider. The analysis uses a proton–proton data sample corresponding to an integrated luminosity of 20.2 fb-1 collected at a centre-of-mass energy s = 8 TeV. Integrated fiducial cross-sections together with normalised differential fiducial cross-sections, sensitive to the kinematics of final-state QED radiation, are obtained. The results are found to be in agreement with state-of-the-art predictions for final-state QED radiation. First measurements of Z→llγγ decays are also reported. © The Author(s) 2024.
|
|
| 3. |
- Bergemalm, Daniel, 1977-, et al.
(författare)
-
Systemic Inflammation in Preclinical Ulcerative Colitis
- 2021
-
Ingår i: Gastroenterology. - : AGA Institute. - 0016-5085 .- 1528-0012. ; 161:5, s. 1526-1539.e9
-
Tidskriftsartikel (refereegranskat)abstract
- Background & Aims: Preclinical ulcerative colitis is poorly defined. We aimed to characterize the preclinical systemic inflammation in ulcerative colitis, using a comprehensive set of proteins.Methods: We obtained plasma samples biobanked from individuals who developed ulcerative colitis later in life (n = 72) and matched healthy controls (n = 140) within a population-based screening cohort. We measured 92 proteins related to inflammation using a proximity extension assay. The biologic relevance of these findings was validated in an inception cohort of patients with ulcerative colitis (n = 101) and healthy controls (n = 50). To examine the influence of genetic and environmental factors on these markers, a cohort of healthy twin siblings of patients with ulcerative colitis (n = 41) and matched healthy controls (n = 37) were explored.Results: Six proteins (MMP10, CXCL9, CCL11, SLAMF1, CXCL11 and MCP-1) were up-regulated (P < .05) in preclinical ulcerative colitis compared with controls based on both univariate and multivariable models. Ingenuity Pathway Analyses identified several potential key regulators, including interleukin-1β, tumor necrosis factor, interferon-gamma, oncostatin M, nuclear factor-κB, interleukin-6, and interleukin-4. For validation, we built a multivariable model to predict disease in the inception cohort. The model discriminated treatment-naïve patients with ulcerative colitis from controls with leave-one-out cross-validation (area under the curve = 0.92). Consistently, MMP10, CXCL9, CXCL11, and MCP-1, but not CCL11 and SLAMF1, were significantly up-regulated among the healthy twin siblings, even though their relative abundances seemed higher in incident ulcerative colitis.Conclusions: A set of inflammatory proteins are up-regulated several years before a diagnosis of ulcerative colitis. These proteins were highly predictive of an ulcerative colitis diagnosis, and some seemed to be up-regulated already at exposure to genetic and environmental risk factors.
|
|
| 4. |
- Ekman, Petter, 1988-, et al.
(författare)
-
Importance of Sub-Grid Scale Modeling for Accurate Aerodynamic Simulations
- 2021
-
Ingår i: Journal of Fluids Engineering. - : ASME. - 0098-2202 .- 1528-901X. ; 143:1
-
Tidskriftsartikel (refereegranskat)abstract
- The Ahmed body is one of the most well-investigated vehicle bodies for aerodynamic purposes. Despite its simple geometry, the flow around the body, especially at the rear, is very complex as it is dominated by a large wake with strong interaction between vortical structures. In this study, the flow around the 25 deg Ahmed body has been investigated using large eddy simulations and compared to high-resolution particle image velocimetry (PIV) measurements. Special emphasis was put on studying three commonly used sub-grid scale (SGS) models and their ability to capture vortical structures around the Ahmed body. The ability of the SGS models to capture the near-wall behavior and small-scale dissipation is crucial for capturing the correct flow field. Very good agreement between simulations and PIV measurements were seen when using the dynamic Smagorinsky-Lilly and the wall-adopting local eddy-viscosity SGS models, respectively. However, the standard Smagorinsky-Lilly model was not able to capture the flow patterns when compared to the PIV measurements due to shortcomings in the near-wall modeling in the standard Smagorinsky-Lilly model, resulting in overpredicted separation.
|
|
| 5. |
- Ekman, Petter, 1988-
(författare)
-
Important Factors for Accurate Scale-Resolving Simulations of Automotive Aerodynamics
- 2020
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Road transports are responsible for almost 18 % of the greenhouse gas emission in Europe and are today the leading cause of air pollution in cities. Aerodynamic resistance has a significant effect on fuel consumption and hence the emission of vehicles. For electric vehicles, emissions are not affected by the aerodynamics as such but instead have a significant effect on the effective range of the vehicle.In 2017, a new measurement procedure was introduced, Worldwide Harmonized Light Vehicles Test Procedure (WLTP), for measuring emissions, fuel consumption, and range. This procedure includes a new test cycle with increased average driving speed compared to the former procedure, which thereby increases the importance of the aerodynamic resistance, as it drastically increases with speed. A second effect is that the exact car configuration sold to the customer needs to be certified in terms of fuel consumption and emissions. The result is that every possible combination of optional extras, which might affect the aerodynamic resistance, needs to be aerodynamically analyzed and possibly improved. From 2021, the European Commission will introduce stricter emission regulations for new passenger cars, with the fleet-wide average lowered to 95 grams CO2=km, which puts an even higher demand on achieving efficient aerodynamics.Virtual development of the aerodynamics of road vehicles is today used to a great extent, using Computational Fluid Dynamics, as it enables faster and cheaper development. However, achieving high accuracy for the prediction of the flow field and aerodynamic forces is challenging, especially given the complexity of both the vehicle geometry in itself and the surrounding flow field. Even for a simplified generic bluff body, accurately predicting the flow field and aerodynamic forces is a challenge. The main reason for this challenge of achieving results with high accuracy is the prediction of the complex behavior of turbulence. Scale-resolving simulation (SRS) methods, such as Large Eddy Simulation (LES), where most of the turbulent structures are resolved has in many studies shown high accuracy but unfortunately to a very high computational cost. It is primarily the small turbulent structures within the near-wall region that requires a _ne resolution in both space (the mesh) and in time. This fine resolution is the reason for the very high computational cost and makes LES unfeasible for practical use in industrial aerodynamic development at present and in the near future. By modeling the turbulent structures within the near-wall region using a Reynolds-Averaged Navier-Stokes (RANS) model, and resolving the turbulence outside the region with a LES model, a coarser resolution is possible to use, resulting in significantly lower computational cost. Which used RANS model is of high importance, and especially how much turbulent viscosity the model generates, as too high values can result in suppression of the resolved turbulence.The transitioning between the RANS and LES regions have a significant effect on the results. Faster transition enables more resolved turbulence, favorable for higher accuracy, but needs to be balanced with sufficient shielding of the RANS region. If resolving the turbulence occurs within the near-wall region, and the mesh is not sufficiently fine, it can result in poor accuracy.By increasing the time-step size and disregarding best-practice guides, the computational cost can be significantly reduced. The accuracy is reasonably insensitive to the larger time step sizes until a certain degree, thereby enabling computationally cheaper SRS to achieve high accuracy of aerodynamic predictions needed to meet present and future emission regulations.
|
|
| 6. |
- Hedenqvist, Patricia, et al.
(författare)
-
The effect of housing environment on bone healing in a critical radius defect in New Zealand White rabbits
- 2020
-
Ingår i: Plos One. - : Public Library of Science (PLoS). - 1932-6203. ; 15:5
-
Tidskriftsartikel (refereegranskat)abstract
- In animal studies on bone healing, the effect of housing space and physical activity are seldom taken into account. Bone formation was evaluated in New Zealand White rabbits (mean ± SEM BW: 3.9 ± 0.11 kg) with a critical bone defect after 12 weeks of rehabilitation in pair-housing in 3 m2 large floor pens (Floor, n = 10) or standard single housing in 0.43 m2 cages (Cage, n = 10). In the randomised full-factorial study, a bone replica of calcium phosphate cement (CPC, n = 10) or autologous bone (AB, n = 10) was implanted in the unilateral 20 mm radius defect. Post-mortem, the oxidative capacity was measured by citrate synthase (CS) activity in M. quadriceps and the defect filling volume and density evaluated by microcomputer tomography (μ-CT). Histology sections were evaluated by subjective scoring and histomorphometry. Fourteen rabbits remained until the end of the study. Group Floor (n = 7; 3 CPC + 4 AB) had a higher CS activity and a larger bone defect filling volume and lower density by μ-CT measurements than group Cage (n = 7; 3 CPC + 4 AB). Three out of four rabbits in AB-Floor presented fusion of the defect with reorganisation of trabecular bone, whereas three of four in AB-Cage showed areas of incomplete healing. Floor rabbits had a higher score of bony fusion between the radius and ulna than Cage rabbits. There were no differences between groups in histomorphometry. The study found that a larger housing space increased physical activity and promoted bone formation. © 2020 Hedenqvist et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
|
|
| 7. |
- Kennedy, Beatrice, 1982-, et al.
(författare)
-
App-based COVID-19 syndromic surveillance and prediction of hospital admissions in COVID Symptom Study Sweden
- 2022
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 13:1
-
Tidskriftsartikel (refereegranskat)abstract
- The app-based COVID Symptom Study was launched in Sweden in April 2020 to contribute to real-time COVID-19 surveillance. We enrolled 143,531 study participants (≥18 years) who contributed 10.6 million daily symptom reports between April 29, 2020 and February 10, 2021. Here, we include data from 19,161 self-reported PCR tests to create a symptom-based model to estimate the individual probability of symptomatic COVID-19, with an AUC of 0.78 (95% CI 0.74-0.83) in an external dataset. These individual probabilities are employed to estimate daily regional COVID-19 prevalence, which are in turn used together with current hospital data to predict next week COVID-19 hospital admissions. We show that this hospital prediction model demonstrates a lower median absolute percentage error (MdAPE: 25.9%) across the five most populated regions in Sweden during the first pandemic wave than a model based on case notifications (MdAPE: 30.3%). During the second wave, the error rates are similar. When we apply the same model to an English dataset, not including local COVID-19 test data, we observe MdAPEs of 22.3% and 19.0% during the first and second pandemic waves, respectively, highlighting the transferability of the prediction model.
|
|
| 8. |
- Mellgren, Torbjörn, 1986-, et al.
(författare)
-
Guided bone tissue regeneration using a hollow calcium phosphate based implant in a critical size rabbit radius defect
- 2021
-
Ingår i: Biomedical Materials. - : Institute of Physics Publishing (IOPP). - 1748-6041 .- 1748-605X. ; 16:3
-
Tidskriftsartikel (refereegranskat)abstract
- Long bone fractures are common and sometimes difficult to treat. Autologous bone (AB), bovine bone and calcium phosphates are used to stimulate bone growth with varying results. In the present study, a calcium phosphate cement (CPC) that previously showed promising grafting capabilities was evaluated for the first time in a long bone defect. A radius defect of 20 mm was created in 20 rabbits. The defect was filled by either a hollow CPC implant that had been manufactured as a replica of a rabbit radius through indirect 3D printing, or by particulate AB as control. Defect filling and bone formation was evaluated after 12 weeks by combining micro computed tomography (mu CT) and scoring of 3D images, together with histomorphometry and histology. The mu CT and histomorphometric evaluations showed a similar amount of filling of the defect (combining graft and bone) between the CPC and AB group, but the scoring of 3D images showed that the filling in the CPC group was significantly larger. Histologically the AB graft could not be distinguished from the new bone. The AB treated defects were found to be composed of more bone than the CPC group, including reorganised cancellous and cortical bone. Both the CPC and AB material was associated with new bone formation, also in the middle of the defect, which could result in closing of the otherwise critically sized gap. This study shows the potential for an indirectly 3D printed implant in guided bone regeneration in critically sized long bone defects.
|
|
| 9. |
- Mullier, G.A., et al.
(författare)
-
Observation of the γγ→ττ Process in Pb+Pb Collisions and Constraints on the τ-Lepton Anomalous Magnetic Moment with the ATLAS Detector
- 2023
-
Ingår i: Physical Review Letters. - : American Physical Society (APS). - 1079-7114 .- 0031-9007. ; 131:15
-
Tidskriftsartikel (refereegranskat)abstract
- This Letter reports the observation of τ-lepton-pair production in ultraperipheral lead-lead collisions Pb+Pb→Pb(γγ→ττ)Pb and constraints on the τ-lepton anomalous magnetic moment a_{τ}. The dataset corresponds to an integrated luminosity of 1.44 nb^{-1} of LHC Pb+Pb collisions at sqrt[s_{NN}]=5.02 TeV recorded by the ATLAS experiment in 2018. Selected events contain one muon from a τ-lepton decay, an electron or charged-particle track(s) from the other τ-lepton decay, little additional central-detector activity, and no forward neutrons. The γγ→ττ process is observed in Pb+Pb collisions with a significance exceeding 5 standard deviations and a signal strength of μ_{ττ}=1.03_{-0.05}^{+0.06} assuming the standard model value for a_{τ}. To measure a_{τ}, a template fit to the muon transverse-momentum distribution from τ-lepton candidates is performed, using a dimuon (γγ→μμ) control sample to constrain systematic uncertainties. The observed 95% confidence-level interval for a_{τ} is -0.057
|
|
| 10. |
- Mullier, G.A., et al.
(författare)
-
Strong Constraints on Jet Quenching in Centrality-Dependent p+Pb Collisions at 5.02 TeV from ATLAS
- 2023
-
Ingår i: Physical Review Letters. - : American Physical Society. - 0031-9007 .- 1079-7114. ; 131:7
-
Tidskriftsartikel (refereegranskat)abstract
- Jet quenching is the process of color-charged partons losing energy via interactions with quark-gluon plasma droplets created in heavy-ion collisions. The collective expansion of such droplets is well described by viscous hydrodynamics. Similar evidence of collectivity is consistently observed in smaller collision systems, including p p and p + Pb collisions. In contrast, while jet quenching is observed in Pb + Pb collisions, no evidence has been found in these small systems to date, raising fundamental questions about the nature of the system created in these collisions. The ATLAS experiment at the Large Hadron Collider has measured the yield of charged hadrons correlated with reconstructed jets in 0.36 nb - 1 of p + Pb and 3.6 pb - 1 of p p collisions at 5.02 TeV. The yields of charged hadrons with p T ch > 0.5 GeV near and opposite in azimuth to jets with p T jet > 30 or 60 GeV, and the ratios of these yields between p + Pb and p p collisions, I p Pb , are reported. The collision centrality of p + Pb events is categorized by the energy deposited by forward neutrons from the struck nucleus. The I p Pb values are consistent with unity within a few percent for hadrons with p T ch > 4 GeV at all centralities. These data provide new, strong constraints that preclude almost any parton energy loss in central p + Pb collisions. © 2023 CERN, for the ATLAS Collaboration.
|
|
