1. |
- Andersson, Mike, et al.
(författare)
-
Field Effect Based Gas Sensors, from Basic Mechanisms to the Latest Commercial Device Designs
- 2016
-
Ingår i: SENSORS AND ELECTRONIC INSTRUMENTATION ADVANCES (SEIA). - : INT FREQUENCY SENSOR ASSOC-IFSA. - 9788460899631 ; , s. 19-21
-
Konferensbidrag (refereegranskat)abstract
- This contribution treats the latest developments in the understanding of basic principles regarding device design, transduction mechanisms, gas-materials-interactions, and materials processing for the tailored design and fabrication of SiC FET gas sensor devices, mainly intended as products for the automotive sector.
|
|
2. |
- Fashandi, Hossein, et al.
(författare)
-
Applicability of MOS structures in monitoring catalytic properties, as exemplified for monolayer-iron-oxide-coated porous platinum films
- 2016
-
Ingår i: Journal of Catalysis. - : Elsevier. - 0021-9517 .- 1090-2694. ; 344, s. 583-590
-
Tidskriftsartikel (refereegranskat)abstract
- Metal Oxide Semiconductor (MOS) capacitor devices comprised of monolayer iron oxide-coated as well as non-coated polycrystalline Pt deposited on oxidized silicon carbide substrates have been fabricated and their usefulness as realistic model systems in catalyst studies development was evaluated. The CO oxidation characteristics of both iron oxide- and non-coated Pt catalysts were investigated using mass spectrometry, monitoring the carbon dioxide production rate for different combinations of carbon monoxide (CO) and oxygen concentrations at various temperatures. Additionally, the output capacitance of the MOS model catalysts was recorded for each individual CO oxidation activity. A low-temperature shift in CO oxidation characteristics for the monolayer-coated compared to the non-coated Pt catalysts was observed, similar to that previously reported for monolayer iron oxide grown on single-crystalline Pt substrates. A strong correlation between the output capacitance of the MOS structures and the CO oxidation characteristics was found for both monolayer- and non-coated model catalysts. Furthermore, the devices exhibit retained MOS electrical output and CO oxidation characteristics as well as an unaffected catalyst surface composition, as confirmed by photoelectron spectroscopy, even after 200 h of continuous model catalyst operation. In addition to the implications on practical applicability of monolayer iron oxide coating on widely used polycrystalline Pt films in real-world catalysts and sensors, the findings also point to new possibilities regarding the use of MOS model systems for in situ characterization, high throughput screening, and tailoring of e.g. catalyst- and fuel-cell-electrode materials for specific applications.
|
|
3. |
- Fashandi, Hossein, 1984-
(författare)
-
Novel Layered and 2D Materials for Functionality Enhancement of Contacts and Gas Sensors
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Chemical gas sensors are widely-used electronic devices for detecting or measuring the density levels of desired gas species. In this study, materials with established or potential applications for gas sensors are treated. For the case of high-temperature applications (≈ 600 °C), semiconductor-based gas sensors suffer from rapid oxidation of the metallic ohmic contacts, the same cause-of-failure as for the general case of high-temperature semiconductor electronics. 4H-SiC is an ideal semiconductor for high-temperature applications. Ti3SiC2 is a known ohmic contact to 4H-SiC with the known two-step synthesis process of post-annealing of pre-deposited Ti/Al multilayers or sputter-deposition of Ti3SiC2 films at > 900 °C. Here, sputter-deposition of Ti on 4H-SiC at > 900 °C is presented as a novel single-step method for the synthesis of Ti3SiC2 ohmic contacts, based on a concurrent reaction between sputter-deposited Ti and 4HSiC. Ti3SiC2, similar to any other known ohmic contact, degrade rapidly in high-temperature oxidizing ambient. To try to overcome this obstacle, noble metal diffusion into Ti3SiC2 has been s studied with the goal to retain ohmic properties of Ti3SiC2 and harnessing oxidation resistivity of noble metals. A novel exchange intercalation between Ti3SiC2 and Au is discovered which results in the almost complete exchange of Si with Au giving rise to novel Ti3AuC2 and Ti3Au2C2. Ti3IrC2 is also synthesized through exchange intercalation of Ir into Ti3Au2C2. All the aforementioned phases showed ohmic properties to 4H-SiC. This technique is also studied based on Ti2AlC and Ti3AlC2 resulting in the synthesis of novel Ti2Au2C and Ti3Au2C2, respectively. Using Ti3AuC2 and an Au/IrOx capping layer, an ohmic contact was manufactured, which maintained ohmic properties and showed no structural defects after 1000 h of aging at 600 °C air.Ti3SiC2 is a member of a large family of materials known as Mn+1AXn phases. While exchange reactions of Si (or Al) planes in Ti3SiC2 (Ti2AlC and Ti3AlC2) is presented here, a world-wide research already exists on chemical removal of the same atomic planes from different Mn+1AXn phases and the synthesis of Mn+1Xn sheets known as MXenes. I performed a theoretical study regarding simulation of electronic and structural properties of more than120 different possible MXene phases. The results show that some MXene phases, when terminated by particular gas species, turn into Dirac materials. That is, they possess massless Dirac fermions with different properties compared to graphene such as higher number of Dirac points at the Fermi level, giant spin orbit splitting, and preserved 2D-type electronic properties by extending the dimensionality. The general substantial change of the electronic properties of MXenes under different gas adsorption configurations stands out and can thus be harnessed for sensing applications.Growth of monolayer iron oxide on porous Pt sensing layers is another novel approach used in this study for applying the unique properties of 2D materials for gas sensors. A low temperature shift in CO oxidation characteristics is presented. The approach is similar to that previously reported using bulk single crystal Pt substrate, the latter being an unrealistic model for sensors and catalysts. Monolayer-coated Pt sensing layers were fabricated as the metal component of a metal oxide semiconductor (MOS) capacitor device, whereby the electrical response of the MOS device could be used to map out the catalytic properties of the sensing layer. The monolayer-coated Pt surface showed to be stable with retained improved catalytic properties for > 200 h. The MOS device measurements are here utilized as a handy method for in-situ monitoring of the surface chemical properties of the monolayer-coated Pt and the approach is highly functional for use and characterization of monolayer coatings of widely used sensingor catalytic layers.
|
|