| 1. |
- Prusti, T., et al.
(författare)
-
The Gaia mission
- 2016
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 595
-
Tidskriftsartikel (refereegranskat)abstract
- Gaia is a cornerstone mission in the science programme of the European Space Agency (ESA). The spacecraft construction was approved in 2006, following a study in which the original interferometric concept was changed to a direct-imaging approach. Both the spacecraft and the payload were built by European industry. The involvement of the scientific community focusses on data processing for which the international Gaia Data Processing and Analysis Consortium (DPAC) was selected in 2007. Gaia was launched on 19 December 2013 and arrived at its operating point, the second Lagrange point of the Sun-Earth-Moon system, a few weeks later. The commissioning of the spacecraft and payload was completed on 19 July 2014. The nominal five-year mission started with four weeks of special, ecliptic-pole scanning and subsequently transferred into full-sky scanning mode. We recall the scientific goals of Gaia and give a description of the as-built spacecraft that is currently (mid-2016) being operated to achieve these goals. We pay special attention to the payload module, the performance of which is closely related to the scientific performance of the mission. We provide a summary of the commissioning activities and findings, followed by a description of the routine operational mode. We summarise scientific performance estimates on the basis of in-orbit operations. Several intermediate Gaia data releases are planned and the data can be retrieved from the Gaia Archive, which is available through the Gaia home page.
|
|
| 2. |
- Brown, A. G. A., et al.
(författare)
-
Gaia Data Release 1 Summary of the astrometric, photometric, and survey properties
- 2016
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 595
-
Tidskriftsartikel (refereegranskat)abstract
- Context. At about 1000 days after the launch of Gaia we present the first Gaia data release, Gaia DR1, consisting of astrometry and photometry for over 1 billion sources brighter than magnitude 20.7. Aims. A summary of Gaia DR1 is presented along with illustrations of the scientific quality of the data, followed by a discussion of the limitations due to the preliminary nature of this release. Methods. The raw data collected by Gaia during the first 14 months of the mission have been processed by the Gaia Data Processing and Analysis Consortium (DPAC) and turned into an astrometric and photometric catalogue. Results. Gaia DR1 consists of three components: a primary astrometric data set which contains the positions, parallaxes, and mean proper motions for about 2 million of the brightest stars in common with the HIPPARCOS and Tycho-2 catalogues - a realisation of the Tycho-Gaia Astrometric Solution (TGAS) - and a secondary astrometric data set containing the positions for an additional 1.1 billion sources. The second component is the photometric data set, consisting of mean G-band magnitudes for all sources. The G-band light curves and the characteristics of similar to 3000 Cepheid and RR Lyrae stars, observed at high cadence around the south ecliptic pole, form the third component. For the primary astrometric data set the typical uncertainty is about 0.3 mas for the positions and parallaxes, and about 1 mas yr(-1) for the proper motions. A systematic component of similar to 0.3 mas should be added to the parallax uncertainties. For the subset of similar to 94 000 HIPPARCOS stars in the primary data set, the proper motions are much more precise at about 0.06 mas yr(-1). For the secondary astrometric data set, the typical uncertainty of the positions is similar to 10 mas. The median uncertainties on the mean G-band magnitudes range from the mmag level to similar to 0.03 mag over the magnitude range 5 to 20.7. Conclusions. Gaia DR1 is an important milestone ahead of the next Gaia data release, which will feature five-parameter astrometry for all sources. Extensive validation shows that Gaia DR1 represents a major advance in the mapping of the heavens and the availability of basic stellar data that underpin observational astrophysics. Nevertheless, the very preliminary nature of this first Gaia data release does lead to a number of important limitations to the data quality which should be carefully considered before drawing conclusions from the data.
|
|
| 3. |
- Clementini, G., et al.
(författare)
-
Testing parallaxes with local Cepheids and RR Lyrae stars
- 2017
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 605
-
Tidskriftsartikel (refereegranskat)abstract
- Context. Parallaxes for 331 classical Cepheids, 31 Type II Cepheids, and 364 RR Lyrae stars in common between Gaia and the HIPPARCOS and Tycho-2 catalogues are published in Gaia Data Release 1 (DR1) as part of the Tycho-Gaia Astrometric Solution (TGAS). Aims. In order to test these first parallax measurements of the primary standard candles of the cosmological distance ladder, which involve astrometry collected by Gaia during the initial 14 months of science operation, we compared them with literature estimates and derived new period-luminosity (PL), period-Wesenheit (PW) relations for classical and Type II Cepheids and infrared PL, PL-metallicity (PLZ), and optical luminosity-metallicity (MV-[Fe/H]) relations for the RR Lyrae stars, with zero points based on TGAS.Methods. Classical Cepheids were carefully selected in order to discard known or suspected binary systems. The final sample comprises 102 fundamental mode pulsators with periods ranging from 1.68 to 51.66 days (of which 33 with sigma(omega)/omega < 0 : 5). The Type II Cepheids include a total of 26 W Virginis and BL Herculis stars spanning the period range from 1.16 to 30.00 days (of which only 7 with sigma(omega)/omega 0 : 5). The RR Lyrae stars include 200 sources with pulsation period ranging from 0.27 to 0.80 days (of which 112 with sigma(omega)/omega < 0 : 5). The new relations were computed using multi- band (V; I; J; K-s) photometry and spectroscopic metal abundances available in the literature, and by applying three alternative approaches: (i) linear least-squares fitting of the absolute magnitudes inferred from direct transformation of the TGAS parallaxes; (ii) adopting astrometry-based luminosities; and (iii) using a Bayesian fitting approach. The last two methods work in parallax space where parallaxes are used directly, thus maintaining symmetrical errors and allowing negative parallaxes to be used. The TGAS-based PL; PW; PLZ, and MV [Fe/H] relations are discussed by comparing the distance to the Large Magellanic Cloud provided by different types of pulsating stars and alternative fitting methods.Results. Good agreement is found from direct comparison of the parallaxes of RR Lyrae stars for which both TGAS and HST measurements are available. Similarly, very good agreement is found between the TGAS values and the parallaxes inferred from the absolute magnitudes of Cepheids and RR Lyrae stars analysed with the Baade-Wesselink method. TGAS values also compare favourably with the parallaxes inferred by theoretical model fitting of the multi-band light curves for two of the three classical Cepheids and one RR Lyrae star, which were analysed with this technique in our samples. The K-band PL relations show the significant improvement of the TGAS parallaxes for Cepheids and RR Lyrae stars with respect to the HIPPARCOS measurements. This is particularly true for the RR Lyrae stars for which improvement in quality and statistics is impressive.Conclusions. TGAS parallaxes bring a significant added value to the previous HIPPARCOS estimates. The relations presented in this paper represent the first Gaia-calibrated relations and form a work-in-progress milestone report in the wait for Gaia-only parallaxes of which a first solution will become available with Gaia Data Release 2 (DR2) in 2018.
|
|
| 4. |
- van Leeuwen, F., et al.
(författare)
-
Gaia Data Release 1 : Open cluster astrometry: Performance, limitations, and future prospects
- 2017
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 601
-
Tidskriftsartikel (refereegranskat)abstract
- Context. The first Gaia Data Release contains the Tycho-Gaia Astrometric Solution (TGAS). This is a subset of about 2 million stars for which, besides the position and photometry, the proper motion and parallax are calculated using Hipparcos and Tycho-2 positions in 1991.25 as prior information. Aims. We investigate the scientific potential and limitations of the TGAS component by means of the astrometric data for open clusters. Methods. Mean cluster parallax and proper motion values are derived taking into account the error correlations within the astrometric solutions for individual stars, an estimate of the internal velocity dispersion in the cluster, and, where relevant, the effects of the depth of the cluster along the line of sight. Internal consistency of the TGAS data is assessed. Results. Values given for standard uncertainties are still inaccurate and may lead to unrealistic unit-weight standard deviations of least squares solutions for cluster parameters. Reconstructed mean cluster parallax and proper motion values are generally in very good agreement with earlier Hipparcos-based determination, although the Gaia mean parallax for the Pleiades is a significant exception. We have no current explanation for that discrepancy. Most clusters are observed to extend to nearly 15 pc from the cluster centre, and it will be up to future Gaia releases to establish whether those potential cluster-member stars are still dynamically bound to the clusters. Conclusions. The Gaia DR1 provides the means to examine open clusters far beyond their more easily visible cores, and can provide membership assessments based on proper motions and parallaxes. A combined HR diagram shows the same features as observed before using the Hipparcos data, with clearly increased luminosities for older A and F dwarfs.
|
|
| 5. |
- Isacsson, G., et al.
(författare)
-
Bibloc and Monobloc Oral appliances in the Treatment of Obstructive Sleep apnoea : a Multicenter, Randomized, Blinded, Parallel-Group Trial
- 2017
-
Ingår i: Sleep Medicine. - : Elsevier. - 1389-9457 .- 1878-5506. ; 40:Suppl 1, s. E142-E143
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- Introduction: The clinical benefit of bibloc over monobloc appliances has not been established in randomized trials treating obstructive sleep apnoea (OSA). We hypothesized that the two types of appliances are equally effective in treating moderate to severe OSA. Materials and methods: We performed a blinded, multicenter, randomized, controlled, prospective, parallel-group trial including patients aged 18 years or older who had moderate-to-severe OSA. Patients were randomly assigned to receive either a bibloc or a monobloc appliance with the intention to protrude the mandible 75% of the individual maximal protrusion capacity. At baseline a one-night respiratory polygraphy was done without any respiratory support. The polygraphy was iterated with the appliance in place at a 6-week follow-up. The primary outcome was the absolute change in the apnoea-hypopnea-index (AHI) from baseline to the 6-week follow-up, analysed in the per-protocol population. All patients who received an appliance were included in the safety analysis. This trial is registered with ClinicalTrials.gov, number NCT02148510, and approved by Uppsala Regional Ethical Review Board, Sweden (#2014/021). Results: We recruited patients from three dental specialist clinics in Sweden; enrolment of 302 patients was done between March 2014 and April 2016; 146 randomized to bibloc and 156 to monobloc appliance. Twenty-three patients in the bibloc group and 17 in the monobloc group were withdrawn due to reasons like appliance could not be fitted, lack of compliance, adverse events or non-valid follow-up polygraphy i.e. a per-protocol group of 123 bibloc and 139 monobloc treated patients. The mean change of AHI from baseline to 6 weeks of treatment was -13.8 (95% CI -16.1 to -11.5; p < 0.001) in the bibloc group and -12.5 (95% CI -14.8 to -10.3; p < 0.001) in the monobloc group. The mean difference was not significant between the groups (-1.3 (95% CI -4.5 to 1.9). The most common adverse event in the orofacial region was upper airway infection followed by complains from various parts of the mouth, jaws and teeth. Conclusions: Bibloc and monobloc appliance treatment was equal in their effects in treating OSA as measured by at home polygraphic respiratory measures and the appliances were associated with a similar degree of adverse events. Acknowledgements: Funding from Uppsala-Örebro Regional Research Council and Vastmanland County Council, Sweden.
|
|
| 6. |
|
|
| 7. |
- Bulakci, O., et al.
(författare)
-
An Agile Resource Management Framework for 5G
- 2017
-
Konferensbidrag (refereegranskat)abstract
- This paper presents the design foundations of an agile resource management (RM) framework for the fifth generation (5G) radio access network (RAN) by describing essential building blocks (BBs). Overall, the presented RM framework provides holistic RM solutions that consider and exploit the novel aspects of 5G systems, such as, diverse service requirements, co-existence of multiple air interface (AI) variants (AIVs) in the overall AI, dynamic radio topologies, and novel communication modes. The proposed framework encompasses the following key BBs: Advanced interference management techniques for dense and dynamic deployments; dynamic traffic steering mechanisms that aim to attain the optimum mapping of 5G services to any available resources when and where needed by considering the peculiarities of different AIVs; tight interworking between novel 5G AIVs and evolved legacy AIVs such as Longterm Evolution (LTE); sharing of a common RAN by multiple network slices; RAN moderation techniques to attain energy efficiency gains; and functional extensions in the device measurement context to enable all the above new functionalities. The BBs are analyzed from the perspectives of key findings and RAN design implications.
|
|
| 8. |
- Chan, W. M., et al.
(författare)
-
Kolmogorov Model for Large Millimeter-Wave Antenna Arrays : Learning-based Beam-Alignment
- 2019
-
Ingår i: Conference Record - Asilomar Conference on Signals, Systems and Computers. - : Institute of Electrical and Electronics Engineers (IEEE). ; , s. 411-415
-
Konferensbidrag (refereegranskat)abstract
- A new approach is presented to the problem of beam alignment for large-dimensional millimeter-wave antenna systems, with a single radio-frequency chain, based on the application of the Kolmogorov Model (KM) framework to enable learning-based beam alignment. Unlike the conventional exhaustive search-based approach, the proposed KM does not require the entire beam space search, i.e., the number of beam soundings can be extremely smaller than the conventional approach, which is achieved by exploiting the predictive power of KM. We show, across several metrics, that by just sounding 25% of the beams, the proposed method approaches the performance of the exhaustive search method. Simulation results that validate the training and test performance of KM and illustrate the new method with significantly reduced overhead are presented.
|
|
| 9. |
- Fodor, Gabor, et al.
(författare)
-
An Overview of Massive MIMO Technology Components in METIS
- 2017
-
Ingår i: IEEE Communications Magazine. - : Institute of Electrical and Electronics Engineers (IEEE). - 0163-6804 .- 1558-1896. ; 55:6, s. 155-161
-
Tidskriftsartikel (refereegranskat)abstract
- As the standardization of full-dimension MIMO systems in the Third Generation Partnership Project progresses, the research community has started to explore the potential of very large arrays as an enabler technology for meeting the requirements of fifth generation systems. Indeed, in its final deliverable, the European 5G project METIS identifies massive MIMO as a key 5G enabler and proposes specific technology components that will allow the cost-efficient deployment of cellular systems taking advantage of hundreds of antennas at cellular base stations. These technology components include handling the inherent pilot-data resource allocation trade-off in a near optimal fashion, a novel random access scheme supporting a large number of users, coded channel state information for sparse channels in frequency-division duplexing systems, managing user grouping and multi-user beamforming, and a decentralized coordinated transceiver design. The aggregate effect of these components enables massive MIMO to contribute to the METIS objectives of delivering very high data rates and managing dense populations.
|
|
| 10. |
- Paiva, A. R. L., et al.
(författare)
-
Kalman-Filter-Based Tracking of Millimeter-Wave Channel Parameters for V2X Applications
- 2019
-
Ingår i: 2019 IEEE Conference on Standards for Communications and Networking, CSCN 2019. - : Institute of Electrical and Electronics Engineers Inc.. - 9781728108643
-
Konferensbidrag (refereegranskat)abstract
- The spectrum of millimeter waves, when properly exploited, represents an important asset for achieving the high data rates and low latencies required by applications in vehicular communications. However, vehicle scenarios are characterized by high mobility, which results in frequent misalignment of beams. Therefore, in these types of scenarios, beam tracking algorithms are important because they can keep the beams aligned with a low training overhead. Kalman filters are strong candidates for the implementation of such algorithms, because they ensure high channel tracking performance over a wide range of signal-to-noise-ratios (SNR) and are easy to implement. This work evaluates the performance of channel tracking methods based on Kalman filters for high mobility. Our numerical results show that the proposed Kalman filter-based channel tracking method has high performance at low SNR regimes compared to least square-based methods, and improve the robustness when using planar instead of linear arrays. Moreover, the proposed channel tracking method is shown to perform well in multipath fading scenarios, while achieving high performance in the presence of strong line-of-sight components.
|
|
