1. |
- Bogdanoff, Toni
(författare)
-
The influence of microstructure on the crack initiation and propagation in Al-Si casting alloys
- 2021
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- For reducing the CO2 footprint in many industrial fields, the goal is to produce lighter components. The aluminium-silicon (Al-Si) cast alloys are promising candidates to fulfill these goals with a high weight-to-strength ratio, good corrosion properties, excellent castability, and recyclable material. However, the variations within these components need to be understood to produce high-performance components for critical applications. The main reason for the rejection in these applications is defects and microstructural features that reduce the mechanical properties. The addition of copper (Cu) is one way of increasing the mechanical properties in Al-Si alloys and is commonly used in the automotive industry. Casting defects harm the mechanical properties, and these defects can be reduced by improving the melt quality, the correct design of the component, and the gating system.The study aims to investigate the static mechanical properties and the crack initiation and propagation under cyclic loading in an Al-7Si-Mg cast alloy with state-of-the-art experiments. The main focuses were on the effect of the HIP process and the role of Cu addition. In-situ cyclic testing using a scanning electron microscope coupled with electron back-scattered diffraction, digital image correlation, focused ion beam (FIB) slicing, and computed tomography scanning was used to evaluate the complex interaction between the crack path and the microstructural features.The amount of Cu retained in the α-Al matrix in as-cast and heat-treated conditions significantly influenced the static mechanical properties by increasing yield strength and ultimate tensile strength with a decrease in elongation. The three-nearest-neighbor distance of eutectic Si and Cu-rich particles and crack tortuosity were new tools to describe the crack propagation in the alloys, showing that a reduced distance between the Cu-rich phases is detrimental for the mechanical properties. Three dimensional tomography using a FIB revealed that the alloy with 3.2 wt.% Cu had a significantly increased quantity of cracked Si particles and intermetallic phases ahead of the crack tip than the Cu-free alloy. The effect of Cu and HIP process in this work shows the complex interaction between the microstructural features and the mechanical properties, and this needs to be considered to produce high-performance components.
|
|
2. |
- Sainis, Salil
(författare)
-
The influence of Al alloy microstructure on conversion coating formation
- 2021
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The formation of conversion coatings based on Ce, trivalent Cr and Ti/Zr is triggered by the local pH increase at cathodic IM sites of the aluminium alloy microstructure. The pH gradient is created over the cathodic intermetallic (IM) sites of the microstructure and its intensity is influenced by their activity which depends on their chemical composition, their size, and spatial distribution. Furthermore, the pre-treatment applied also affects the surface reactivity. The role of each of the microstructural features on the increased pH gradient and the subsequent triggering of local conversion coating deposition remains to be understood. To address the knowledge gap, model cast Al-Si-Fe and Al-Si-Cu-Fe alloys have been designed. Cerium based conversion coating treatment with standard parameters is applied to investigate the microstructure’s influence. Furthermore, four different surface pre-treatments’ effect on the topographical and electrochemical properties have been investigated by localized techniques and have been correlated with deposition experiment observations to prove surface reactivity.In this study, it was found that the four surface pre-treatments – polishing, NaOH, NaOH-HNO3, NaOH-H2SO4 activate the surface of alloys containing Fe-rich IM and Cu-rich IM differently. The surface pre-treatment NaOH-HNO3 was found most detrimental to the surface reactivity as the pre-treatment resulted in passivation of the IM and a drastic reduction in its volta potential. The best pre-treatment for the alloy Al-Si-Fe was found to be one with NaOH etching. In the case of Al-Si-Cu-Fe alloy, pre-treatments where a pickling step (with either H2SO4 or HNO3) was applied followed a NaOH etching step, the surface of the IM was activated more than other pre-treatments due to selective Al dealloying and Cu-redeposition. The extent of Cu-redeposition was observed to be the most when surfaces were pickled with HNO3 solution and with the NaOH- HNO3 pre-treatment, fastest deposition kinetics were observed.In the cast Al-Si-Cu-Fe alloy, the localized deposits were preferentially observed to form on only strong cathodic Cu-rich IM. The size (surface area) of the Cu-rich IM correlated linearly with the lateral deposition area as well as z-direction spread. It was found that the pH gradient resulting from the oxygen reduction reaction near an IM is very local and does not affect pH gradients of a neighbouring Cu-rich IM. The size did not have a profound impact on the extent of deposition occurring on a Cu-rich IM, but it was found that big Cu-rich IM activated faster for deposition reaction than small Cu-rich IM. When the progression of deposition on both coarse and fine microstructure cast Al-Si-Cu-Fe was quantitatively monitored at increasing conversion coating times 0.5h, 1h and 2h, it was observed that big Cu-rich IM in the coarse alloy triggered deposition faster than small Cu-rich IM.Deposition mechanism on Fe-rich IM was found to be composition specific. In the cast of big Fe-rich β-Al5FeSi IM, localized deposition initiated at the border on the IM and is explained based on Si content in the composition of the IM, which has very high resistivity. In another Fe-rich IM, although of a much smaller size, which had lower Si content and was richer in Fe, a localized deposition was observed on the entire IM.
|
|