| 1. |
- Church, Tamara L., et al.
(författare)
-
A Stiff, Tough, and Thermally Insulating Air- and Ice-Templated Plant-Based Foam
- 2022
-
Ingår i: Biomacromolecules. - : American Chemical Society (ACS). - 1525-7797 .- 1526-4602. ; 23:6, s. 2595-2602
-
Tidskriftsartikel (refereegranskat)abstract
- By forming and directionally freezing an aqueous foam containing cellulose nanofibrils, methylcellulose, and tannic acid, we produced a stiff and tough anisotropic solid foam with low radial thermal conductivity. Along the ice-templating direction, the foam was as stiff as nanocellulose–clay composites, despite being primarily methylcellulose by mass. The foam was also stiff perpendicular to the direction of ice growth, while maintaining λr < 25 mW m–1 K–1 for a relative humidity (RH) up to 65% and <30 mW m–1 K–1 at 80% RH. This work introduces the tandem use of two practical techniques, foam formation and directional freezing, to generate a low-density anisotropic material, and this strategy could be applied to other aqueous systems where foam formation is possible.
|
|
| 2. |
- Munier, Pierre, 1993-, et al.
(författare)
-
Rheo-SAXS study of shear-induced orientation and relaxation of cellulose nanocrystal and montmorillonite nanoplatelet dispersions
- 2022
-
Ingår i: Soft Matter. - : Royal Society of Chemistry (RSC). - 1744-683X .- 1744-6848. ; 18:2, s. 390-396
-
Tidskriftsartikel (refereegranskat)abstract
- The development of robust production processes is essential for the introduction of advanced materials based on renewable and Earth-abundant resources. Cellulose nanomaterials have been combined with other highly available nanoparticles, in particular clays, to generate multifunctional films and foams. Here, the structure of dispersions of rod-like cellulose nanocrystals (CNC) and montmorillonite nanoplatelets (MNT) was probed using small-angle X-ray scattering within a rheological cell (Rheo-SAXS). Shear induced a high degree of particle orientation in both the CNC-only and CNC:MNT composite dispersions. Relaxation of the shear-induced orientation in the CNC-only dispersion decayed exponentially and reached a steady-state within 20 seconds, while the relaxation of the CNC:MNT composite dispersion was found to be strongly retarded and partially inhibited. Viscoelastic measurements and Guinier analysis of dispersions at the shear rate of 0.1 s−1 showed that the addition of MNT promotes gel formation of the CNC:MNT composite dispersions. A better understanding of shear-dependent assembly and orientation of multi-component nanoparticle dispersions can be used to process materials with improved mechanical and functional properties.
|
|
