| 1. |
|
|
| 2. |
- Hedlund, E., et al.
(författare)
-
A new test stand for heavy ion induced gas desorption measurements at TSL
- 2008
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 586:3, s. 377-381
-
Tidskriftsartikel (refereegranskat)abstract
- In several experiments at CERN, GSI and BNL it has been found that the lifetime of highly energetic heavy ions in synchrotrons decreases with increasing number of injected ions. This phenomenon occurs due to the collisions of beam ions and residual gas molecules leading to the change of charge of the ions and their loss on the vacuum chamber walls, which in turn cause ion-induced gas desorption and further pressure increase. To gain a deeper understanding of the ion-induced desorption process in the energy range 5-45 MeV/u, a dedicated test stand was built at the end of the K beamline at The Svedberg Laboratory (TSL) in Uppsala, Sweden. The energy range was chosen due to the fact that the injection energy of the heavy ion synchrotron SIS18 at GSI will be 10 MeV/u, and that there are insufficient data in this energy range. A Test Particle Monte-Carlo model of the experimental set-up was build-up, run and analysed for different sample configurations. An important result is that for the same sample material the desorption yield from a flat sample causes a 1.58 times larger pressure increase than that of a tubular sample. A detailed explanation of the set-up is presented.
|
|
| 3. |
- Hedlund, E., et al.
(författare)
-
Ar ion induced desorption yields at the energies 5-17.7 MeV/u
- 2009
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 599:1, s. 1-8
-
Tidskriftsartikel (refereegranskat)abstract
- Particle accelerators have, during Operation with heavy ion beams, shown a significant pressure rise when the intensity of the beam is increased. This pressure rise is due to ion induced desorption, which is the result of beam ions colliding with residual gas atoms in the beam pipe, where they undergo charge exchange. This causes them to hit the vacuum chamber after the next dipole magnet and gas to be released. For the upgrade of the SIS18 synchrotron at GSI the intensity has to be a few orders of magnitude higher than it is today at the injection energy of 10 MeV/u. The aim of this experiment is to measure desorption yields, n, (released Molecules per incident ion) from materials commonly used in accelerators: 316LN stainless steel, Cu, etched Cu, gold coated Cu and Ta, using an Ar beam at impact energies in the range of 5-17.7 MeV/u for perpendicular incidence. The measured initial desorption yields vary for the same material from sample to sample: up to 4.5 times for stainless steel and Lip to 3 times for etched Cu. Therefore more samples should be Studied to have better statistics. Beam conditioning at lower energy does not significantly reduce the desorption yield at higher energy. There is a significant difference Of Lip to a few times in desorption yield between flat and tubular samples. The desorption yield from a Cu sample at grazing incident angle of 125 mrad was an order of magnitude larger than at normal incident angle. It Was found that the total number of positively and negatively charged secondary particles, emitted from the Surface bombarded with heavy ions, does not exceed -40 secondary particles per impact heavy ion. The current of negatively charged particles was about 2.3 times larger than the current for positively charged particles. The impact from secondary particles on dynamic gas pressure was not possible to investigate.
|
|
| 4. |
- Hedlund, E., et al.
(författare)
-
Heavy-ion induced desorption of a TiZrV coated vacuum chamber bombarded with 5 MeV/u Ar8+ beam at grazing incidence
- 2009
-
Ingår i: Journal of Vacuum Science & Technology. A. Vacuum, Surfaces, and Films. - : American Vacuum Society. - 0734-2101 .- 1520-8559. ; 27:1, s. 139-144
-
Tidskriftsartikel (refereegranskat)abstract
- TiZrV nonevaporable getter (NEG) coated vacuum chambers is a new vacuum technology which is already used in many particle accelerators worldwide. This coating is also of interest for heavy-ion accelerator vacuum chambers. Heavy-ion desorption yields from an activated as well as a CO saturated NEG coated tube have been measured with 5 MeV/u Ar8+ beam. The sticking probability of the NEG film was obtained by using the partial pressure ratios on two sides of the NEG coated tube. These ratios were compared to results of modeling of the experimental setup with test particle Monte Carlo and angular coefficient methods. The partial pressures inside the saturated NEG coated tube bombarded with heavy ions were up to 20 times larger than those inside the activated one. However, the partial pressure of methane remained the same. The value of the total desorption yield from the activated NEG coated tube is 2600 molecules/ion. The desorption yields after saturation for CH4, H-2, and CO2 were found to be very close to the yields measured after the activation, while CO increased by up to a factor of 5. The total desorption yield for the saturated tube is up to 7000 molecules/ion. The large value of the desorption yield of the activated NEG coated tube, an order of magnitude higher than the desorption yield from a stainless steel tube at normal incident angle, could be explained by the grazing incident angle.
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
- Birkhofer, Klaus, et al.
(författare)
-
Long-term organic farming fosters below and aboveground biota: Implications for soil quality, biological control and productivity
- 2008
-
Ingår i: Soil Biology & Biochemistry. - : Elsevier BV. - 0038-0717. ; 40:9, s. 2297-2308
-
Tidskriftsartikel (refereegranskat)abstract
- Organic farming may contribute substantially to future agricultural production worldwide by improving soil quality and pest control, thereby reducing environmental impacts of conventional farming. We investigated in a comprehensive way soil chemical, as well as below and aboveground biological parameters of two organic and two conventional wheat farming systems that primarily differed in fertilization and weed management strategies. Contrast analyses identified management related differences between "herbicide-free" bioorganic (BIOORG) and biodynamic (BIODYN) systems and conventional systems with (CONFYM) or without manure (CONMIN) and herbicide application within a long-term agricultural experiment (DOK trial, Switzerland). Soil carbon content was significantly higher in systems receiving farmyard manure and concomitantly microbial biomass (fungi and bacteria) was increased. Microbial activity parameters, such as microbial basal respiration and nitrogen mineralization, showed an opposite pattern, suggesting that soil carbon in the conventional system (CONFYM) was more easily accessible to microorganisms than in organic systems. Bacterivorous nematodes and earthworms were most abundant in systems that received farmyard manure, which is in line with the responses of their potential food sources (microbes and organic matter). Mineral fertilizer application detrimentally affected enchytraeids and Diptera larvae, whereas aphids benefited. Spider abundance was favoured by organic management, most likely a response to increased prey availability from the belowground subsystem or increased weed coverage. In contrast to most soil-based, bottom-up controlled interactions, the twofold higher abundance of this generalist predator group in organic systems likely contributed to the significantly lower abundance of aboveground herbivore pests (aphids) in these systems. Long-term organic farming and the application of farmyard manure promoted soil quality, microbial biomass and fostered natural enemies and ecosystem engineers, suggesting enhanced nutrient cycling and pest control. Mineral fertilizers and herbicide application, in contrast, affected the potential for top-down control of aboveground pests negatively and reduced the organic carbon levels. Our study indicates that the use of synthetic fertilizers and herbicide application changes interactions within and between below and aboveground components, ultimately promoting negative environmental impacts of agriculture by reducing internal biological cycles and pest control. On the contrary, organic farming fosters microbial and faunal decomposers and this propagates into the aboveground system via generalist predators thereby increasing conservation biological control. However, grain and straw yields were 23% higher in systems receiving mineral fertilizers and herbicides reflecting the trade-off between productivity and environmental responsibility. (C) 2008 Elsevier Ltd. All rights reserved.
|
|
| 9. |
- Burman, Magnus, 1966-, et al.
(författare)
-
Cost and Energy Assessment of a High Speed Ship
- 2008
-
Ingår i: International Journal of Small Craft Technology, RINA - Part B. - London : RINA. - 1740-0694. ; 150:1, s. 1-10
-
Tidskriftsartikel (refereegranskat)
|
|
| 10. |
- Burman, Magnus, 1966-, et al.
(författare)
-
Cost and energy assessment of a high speed ship
- 2006
-
Ingår i: Second Conference on High Performance Yacht Design. - 9781622761852
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- A comparison in total life cycle costs and energy consumption for one high speed ship design with three different structural materials have been performed. The investigation considers a high speed ferry with a steel hull and an aluminium superstructure, an all aluminium concept and a ship built in sandwich material with carbon fibre faces. The different materials will affect several cost elements during the design, the production and the operation of the ship until and including its disposal. Furthermore, the material selection has an impact on the energy consumption within all stages of the ships life cycle. The assessment is made in a comparative manner. Hence, identical out fitting components, e.g. interior, instrumentation, and ventilation are left out. It is shown that the steel version causes the highest costs and energy consumption. The sandwich construction has the lowest life cycle costs while the aluminium version has the lowest energy consumption. The break-even point between the steel and the composite versions appears after 4 years (only 2 years of operation!), the break-even point between the aluminium and the composite ferry is after 12 years (10 years of operation). A sensitivity analysis with different possible scenarios, e.g. change in interest, petrol cost, maintenance cost, has been performed. All of the investigated scenarios identify the composite version to have the lowest life cycle costs. This paper summarises an original work carried out as a master of science work as given in [1-2].
|
|
