| 1. |
- Gårdestig, Magnus, 1973-, et al.
(författare)
-
Estimations of effective dose in X-ray examinations derived from information stored in PACS
- 2005
-
Ingår i: Radiological Protection in Transition. - Stockholm : Statens Strålskyddsinstitut. ; , s. 175-178
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Information about each X-ray examination, in a modern digitized X-ray department is generated and stored in a PACS. Appropriate conversion factors, e.g. E/DAP, can be applied to separate projections and summed to the total effective dose for each examination. The objectives of the work were (i) to investigate the accuracy and precision in the calculated effective dose (ii) to identify data for registration of (1) patient dose, (2) exposure data, and (3) patient information (iii) to make it possible to derive dose statistics on patient level for documentation of diagnostic standard doses, optimizations, constancy checks, and future epidemiological studies. The effective doses were calculated using Monte Carlo based computer programs or by using tabulations. Conversion factors were calculated for different levels of information and the individual effective dose was compared to the most precise estimation. The results suggest that the accuracy in the estimations of effective dose increases by added information about the patient (gender, size) and how the examination was performed.
|
|
| 2. |
- Helmrot, Ebba, et al.
(författare)
-
Estimation of the dose to the unborn child at diagnostic X-ray examinations based on data registrerad in RIS/PACS
- 2007
-
Ingår i: European Radiology. - : Springer Science and Business Media LLC. - 0938-7994 .- 1432-1084. ; 17:1, s. 205-209
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this work was to determine mean absorbed doses to the unborn child in common conventional X-ray and computed tomography (CT) examinations and to find an approach for estimating foetal dose based on data registered in the Radiological Information System/Picture Archive and Communication System (RIS/PACS). The kerma-area product (KAP) and CT dose index (CTDIvol) in common examinations were registered using a human-shaped female dosimetry phantom. Foetal doses, Df, were measured using thermoluminescent dosimeters placed inside the phantom and compared with calculated values. Measured foetal doses were given in relation to the KAP and the CTDIvol values, respectively. Conversion factor Df/KAP varies between 0.01 and 3.8 mGy/Gycm2, depending on primary beam position, foetus age and beam quality (tube voltage and filtration). Conversion factors Df/CTDIvol are in the range 0.02 – 1.2 mGy/mGy, in which the foetus is outside or within the primary beam. We conclude that dose conversion factors based on KAP or CTDIvol values automatically generated by the RIS/PACS system can be used for rapid estimations of foetal dose for common examination techniques.
|
|
| 3. |
- Helmrot, Ebba, et al.
(författare)
-
Measurement of radiation dose in dental radiology.
- 2005
-
Ingår i: Radiation Protection Dosimetry. - : Oxford University Press (OUP). - 0144-8420 .- 1742-3406. ; 114, s. 168-171
-
Tidskriftsartikel (refereegranskat)abstract
- Patient dose audit is an important tool for quality control and it is important to have a well-defined and easy to use method for dose measurements. In dental radiology, the most commonly used dose parameters for the setting of diagnostic reference levels (DRLs) are the entrance surface air kerma (ESAK) for intraoral examinations and dose width product (DWP) for panoramic examinations. DWP is the air kerma at the front side of the secondary collimator integrated over the collimator width and an exposure cycle. ESAK or DWP is usually measured in the absence of the patient but with the same settings of tube voltage (kV), tube current (mA) and exposure time as with the patient present. Neither of these methods is easy to use, and, in addition, DWP is not a risk related quantity. A better method of monitoring patient dose would be to use a dose area product (DAP) meter for all types of dental examinations. In this study, measurements with a DAP meter are reported for intraoral and panoramic examinations. The DWP is also measured with a pencil ionisation chamber and the product of DWP and the height that it is feasible to measure DAP using a DAP meter for both intraoral and panoramic examinations. The DAP is therefore recommended for the setting of DRLs. H (DWP H) of the secondary collimator (measured using film) was compared to DAP. The results show that it is feasible to measure DAP using a DAP meter for both intraoral and panoramic examinations. The DAP is therefore recommended for the setting of DRLs.
|
|
| 4. |
- Lofthag-Hansen, Sara, 1956, et al.
(författare)
-
Calculating effective dose on a cone beam computed tomography device: 3D Accuitomo and 3D Accuitomo FPD.
- 2008
-
Ingår i: Dento maxillo facial radiology. - : British Institute of Radiology. - 0250-832X .- 1476-542X. ; 37:2, s. 72-9
-
Tidskriftsartikel (refereegranskat)abstract
- OBJECTIVES: This study evaluates two methods for calculating effective dose, CT dose index (CTDI) and dose-area product (DAP) for a cone beam CT (CBCT) device: 3D Accuitomo at field size 30x40 mm and 3D Accuitomo FPD at field sizes 40x40 mm and 60x60 mm. Furthermore, the effective dose of three commonly used examinations in dental radiology was determined. METHODS: CTDI(100) measurements were performed in a CT head dose phantom with a pencil ionization chamber connected to an electrometer. The rotation centre was placed in the centre of the phantom and also, to simulate a patient examination, in the upper left cuspid region. The DAP value was determined with a plane-parallel transmission ionization chamber connected to an electrometer. A conversion factor of 0.08 mSv per Gy cm(2) was used to determine the effective dose from DAP values. Based on data from 90 patient examinations, DAP and effective dose were determined. RESULTS: CTDI(100) measurements showed an asymmetric dose distribution in the phantom when simulating a patient examination. Hence a correct value of CTDI(w) could not be calculated. The DAP value increased with higher tube current and tube voltage values. The DAP value was also proportional to the field size. The effective dose was found to be 11-77 microSv for the specific examinations. CONCLUSIONS: DAP measurement was found to be the best method for determining effective dose for the Accuitomo. Determination of specific conversion factors in dental radiology must, however, be further developed.
|
|
