1. |
- Hillmer, H., et al.
(författare)
-
Wide continuously tunable 1.55 μm vertical air-cavity wavelength selective elements for filters and VCSELs using micromachined actuation
- 2005
-
Ingår i: Opto-Ireland 2005. - : SPIE - International Society for Optical Engineering. - 0819458104 ; , s. 14-28
-
Konferensbidrag (refereegranskat)abstract
- Tailored scaling allows the effectiveness of physical effects and mechanical stability to be enhanced. This is shown for micromachined 1.55μm vertical-resonator-based filters and VCSELs, capable of wide, continuous, and kink-free tuning by a single control parameter. Tuning is achieved by mechanically actuating one or several membranes in a vertical air-gap resonator including two highly reflective DBR mirrors. Electrostatically actuatable single-chip filters including InP/air-gap DBR's (3.5 periods) reveal a continuous tuning up to 14% of the absolute wavelength. Varying a reverse voltage (U=0 .. -3.2V) between the membranes (almost flat in the unactuated condition) a tuning range up to 142nm was obtained. Varying a reverse voltage (U=0 .. -28V) between the membranes (strained and curved in the unactuated condition) a tuning range up to 221nm was obtained. Optically pumped and continuously tunable 1.55μm VCSELs show 26nm spectral tuning range, 400μW maximum output power, and 57dBm SMSR. This two-chip VCSEL has a movable top mirror membrane, which is precisely designed to obtain a specific air-gap length and a tailored radius of curvature in order to efficiently support the fundamental optical mode of the plane-concave resonator. The curved top mirror DBR membrane consists of periodically alternating differently stressed silicon nitride and silicon dioxide multilayers. The lower InP-based part consists of the InP/GaInAsP bottom DBR and the GaInAsP active region.
|
|