SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Hong J.) srt2:(1995-1999)"

Sökning: WFRF:(Hong J.) > (1995-1999)

  • Resultat 1-10 av 10
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Wang, J. J., et al. (författare)
  • Low damage, highly anisotropic dry etching of SiC
  • 1998
  • Ingår i: High Temperature Electronics Conference, 1998. HITEC. 1998 Fourth International. ; , s. 10-14
  • Konferensbidrag (refereegranskat)abstract
    • A parametric study of the etching characteristics of 6H p+ and n+ SiC and thin film SiC0.5N0.5 in Inductively Coupled Plasma NF3/O2 and NF 3/Ar discharges has been performed. The etch rates in both chemistries increase monotonically with NF3 percentage and rf chuck power. The etch rates go through a maximum with increasing ICP source power, which is explained by a trade-off between the increasing ion flux and the decreasing ion energy. The anisotropy of the etched features is also a function of ion flux, ion energy and atomic fluorine neutral concentration. Indium-tin-oxide (ITO) masks display relatively good etch selectivity over SiC (maximum of 70:1), while photoresist etches more rapidly than SiC. The surface roughness of SiC is essentially independent of plasma composition for NF3/O2 discharges, while extensive surface degradation occurs for SiCN under high NF3:O2 conditions
  •  
2.
  • Hong, J., et al. (författare)
  • Plasma chemistries for high density plasma etching of SiC
  • 1999
  • Ingår i: Journal of Electronic Materials. - Charlottesville, VA, USA. - 0361-5235 .- 1543-186X. ; 28:3, s. 196-201
  • Tidskriftsartikel (refereegranskat)abstract
    • A variety of different plasma chemistries, including SF6, Cl2, ICI, and IBr, have been examined for dry etching of 6H-SiC in high ion density plasma tools (inductively coupled plasma and electron cyclotron resonance). Rates up to 4500 angstroms·min-1 were obtained for SF6 plasmas, while much lower rates (≀800 angstroms·min-1) were achieved with Cl2, ICI, and IBr. The F2-based chemistries have poor selectivity for SiC over photoresist masks (typically 0.4-0.5), but Ni masks are more robust, and allow etch depths ≥10 ÎŒm in the SiC. A micromachining process (sequential etch/deposition steps) designed for Si produces relatively low etch rates (<2,000 angstroms·min-1) for SiC.
  •  
3.
  • Stefansson, M, et al. (författare)
  • Aminodextran as a migration moderator in capillary gel electrophoresis of charged polysaccharides
  • 1997
  • Ingår i: ANALYTICAL CHEMISTRY. - : AMER CHEMICAL SOC. - 0003-2700. ; 69:18, s. 3846-3850
  • Tidskriftsartikel (refereegranskat)abstract
    • Aminodextran (AD) is shown here as an effective electrolyte additive for a size-dependent separation of hyaluronate (HA) oligomers in capillary gel electrophoresis. AD interacts mainly with the negatively charged HA through an ion-exchange mechanism, whi
  •  
4.
  •  
5.
  •  
6.
  •  
7.
  •  
8.
  •  
9.
  •  
10.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-10 av 10

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy