| 1. |
- Backes, Claudia, et al.
(författare)
-
Production and processing of graphene and related materials
- 2020
-
Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
|
|
| 2. |
- Kattge, Jens, et al.
(författare)
-
TRY plant trait database - enhanced coverage and open access
- 2020
-
Ingår i: Global Change Biology. - : Wiley-Blackwell. - 1354-1013 .- 1365-2486. ; 26:1, s. 119-188
-
Tidskriftsartikel (refereegranskat)abstract
- Plant traits-the morphological, anatomical, physiological, biochemical and phenological characteristics of plants-determine how plants respond to environmental factors, affect other trophic levels, and influence ecosystem properties and their benefits and detriments to people. Plant trait data thus represent the basis for a vast area of research spanning from evolutionary biology, community and functional ecology, to biodiversity conservation, ecosystem and landscape management, restoration, biogeography and earth system modelling. Since its foundation in 2007, the TRY database of plant traits has grown continuously. It now provides unprecedented data coverage under an open access data policy and is the main plant trait database used by the research community worldwide. Increasingly, the TRY database also supports new frontiers of trait-based plant research, including the identification of data gaps and the subsequent mobilization or measurement of new data. To support this development, in this article we evaluate the extent of the trait data compiled in TRY and analyse emerging patterns of data coverage and representativeness. Best species coverage is achieved for categorical traits-almost complete coverage for 'plant growth form'. However, most traits relevant for ecology and vegetation modelling are characterized by continuous intraspecific variation and trait-environmental relationships. These traits have to be measured on individual plants in their respective environment. Despite unprecedented data coverage, we observe a humbling lack of completeness and representativeness of these continuous traits in many aspects. We, therefore, conclude that reducing data gaps and biases in the TRY database remains a key challenge and requires a coordinated approach to data mobilization and trait measurements. This can only be achieved in collaboration with other initiatives.
|
|
| 3. |
- Tobias, Deirdre K, et al.
(författare)
-
Second international consensus report on gaps and opportunities for the clinical translation of precision diabetes medicine
- 2023
-
Ingår i: Nature Medicine. - 1546-170X. ; 29:10, s. 2438-2457
-
Forskningsöversikt (refereegranskat)abstract
- Precision medicine is part of the logical evolution of contemporary evidence-based medicine that seeks to reduce errors and optimize outcomes when making medical decisions and health recommendations. Diabetes affects hundreds of millions of people worldwide, many of whom will develop life-threatening complications and die prematurely. Precision medicine can potentially address this enormous problem by accounting for heterogeneity in the etiology, clinical presentation and pathogenesis of common forms of diabetes and risks of complications. This second international consensus report on precision diabetes medicine summarizes the findings from a systematic evidence review across the key pillars of precision medicine (prevention, diagnosis, treatment, prognosis) in four recognized forms of diabetes (monogenic, gestational, type 1, type 2). These reviews address key questions about the translation of precision medicine research into practice. Although not complete, owing to the vast literature on this topic, they revealed opportunities for the immediate or near-term clinical implementation of precision diabetes medicine; furthermore, we expose important gaps in knowledge, focusing on the need to obtain new clinically relevant evidence. Gaps include the need for common standards for clinical readiness, including consideration of cost-effectiveness, health equity, predictive accuracy, liability and accessibility. Key milestones are outlined for the broad clinical implementation of precision diabetes medicine.
|
|
| 4. |
- Bousquet, Jean, et al.
(författare)
-
ARIA digital anamorphosis : Digital transformation of health and care in airway diseases from research to practice
- 2021
-
Ingår i: Allergy. European Journal of Allergy and Clinical Immunology. - : John Wiley & Sons. - 0105-4538 .- 1398-9995. ; 76:1, s. 168-190
-
Forskningsöversikt (refereegranskat)abstract
- Digital anamorphosis is used to define a distorted image of health and care that may be viewed correctly using digital tools and strategies. MASK digital anamorphosis represents the process used by MASK to develop the digital transformation of health and care in rhinitis. It strengthens the ARIA change management strategy in the prevention and management of airway disease. The MASK strategy is based on validated digital tools. Using the MASK digital tool and the CARAT online enhanced clinical framework, solutions for practical steps of digital enhancement of care are proposed.
|
|
| 5. |
- Cruz, Raquel, et al.
(författare)
-
Novel genes and sex differences in COVID-19 severity
- 2022
-
Ingår i: Human Molecular Genetics. - : Oxford University Press. - 0964-6906 .- 1460-2083. ; 31:22, s. 3789-3806
-
Tidskriftsartikel (refereegranskat)abstract
- Here, we describe the results of a genome-wide study conducted in 11 939 coronavirus disease 2019 (COVID-19) positive cases with an extensive clinical information that were recruited from 34 hospitals across Spain (SCOURGE consortium). In sex-disaggregated genome-wide association studies for COVID-19 hospitalization, genome-wide significance (P < 5 × 10−8) was crossed for variants in 3p21.31 and 21q22.11 loci only among males (P = 1.3 × 10−22 and P = 8.1 × 10−12, respectively), and for variants in 9q21.32 near TLE1 only among females (P = 4.4 × 10−8). In a second phase, results were combined with an independent Spanish cohort (1598 COVID-19 cases and 1068 population controls), revealing in the overall analysis two novel risk loci in 9p13.3 and 19q13.12, with fine-mapping prioritized variants functionally associated with AQP3 (P = 2.7 × 10−8) and ARHGAP33 (P = 1.3 × 10−8), respectively. The meta-analysis of both phases with four European studies stratified by sex from the Host Genetics Initiative (HGI) confirmed the association of the 3p21.31 and 21q22.11 loci predominantly in males and replicated a recently reported variant in 11p13 (ELF5, P = 4.1 × 10−8). Six of the COVID-19 HGI discovered loci were replicated and an HGI-based genetic risk score predicted the severity strata in SCOURGE. We also found more SNP-heritability and larger heritability differences by age (<60 or ≥60 years) among males than among females. Parallel genome-wide screening of inbreeding depression in SCOURGE also showed an effect of homozygosity in COVID-19 hospitalization and severity and this effect was stronger among older males. In summary, new candidate genes for COVID-19 severity and evidence supporting genetic disparities among sexes are provided.
|
|
| 6. |
- Martin, David, et al.
(författare)
-
Defining Major Surgery: A Delphi Consensus Among European Surgical Association (ESA) Members
- 2020
-
Ingår i: World Journal of Surgery. - : Springer Science and Business Media LLC. - 0364-2313 .- 1432-2323. ; 44:7, s. 2211-2219
-
Tidskriftsartikel (refereegranskat)abstract
- © 2020, Société Internationale de Chirurgie. Background: Major surgery is a term frequently used but poorly defined. The aim of the present study was to reach a consensus in the definition of major surgery within a panel of expert surgeons from the European Surgical Association (ESA). Methods: A 3-round Delphi process was performed. All ESA members were invited to participate in the expert panel. In round 1, experts were inquired by open- and closed-ended questions on potential criteria to define major surgery. Results were analyzed and presented back anonymously to the panel within next rounds. Closed-ended questions in round 2 and 3 were either binary or statements to be rated on a Likert scale ranging from 1 (strong disagreement) to 5 (strong agreement). Participants were sent 3 reminders at 2-week intervals for each round. 70% of agreement was considered to indicate consensus. Results: Out of 305 ESA members, 67 (22%) answered all the 3 rounds. Significant comorbidities were the only preoperative factor retained to define major surgery (78%). Vascular clampage or organ ischemia (92%), high intraoperative blood loss (90%), high noradrenalin requirements (77%), long operative time (73%) and perioperative blood transfusion (70%) were procedure-related factors that reached consensus. Regarding postoperative factors, systemic inflammatory response (76%) and the need for intensive or intermediate care (88%) reached consensus. Consequences of major surgery were high morbidity (>30% overall) and mortality (>2%). Conclusion: ESA experts defined major surgery according to extent and complexity of the procedure, its pathophysiological consequences and consecutive clinical outcomes.
|
|
| 7. |
- Micah, Angela E., et al.
(författare)
-
Tracking development assistance for health and for COVID-19 : a review of development assistance, government, out-of-pocket, and other private spending on health for 204 countries and territories, 1990-2050
- 2021
-
Ingår i: The Lancet. - : Elsevier. - 0140-6736 .- 1474-547X. ; 398:10308, s. 1317-1343
-
Forskningsöversikt (refereegranskat)abstract
- Background The rapid spread of COVID-19 renewed the focus on how health systems across the globe are financed, especially during public health emergencies. Development assistance is an important source of health financing in many low-income countries, yet little is known about how much of this funding was disbursed for COVID-19. We aimed to put development assistance for health for COVID-19 in the context of broader trends in global health financing, and to estimate total health spending from 1995 to 2050 and development assistance for COVID-19 in 2020. Methods We estimated domestic health spending and development assistance for health to generate total health-sector spending estimates for 204 countries and territories. We leveraged data from the WHO Global Health Expenditure Database to produce estimates of domestic health spending. To generate estimates for development assistance for health, we relied on project-level disbursement data from the major international development agencies' online databases and annual financial statements and reports for information on income sources. To adjust our estimates for 2020 to include disbursements related to COVID-19, we extracted project data on commitments and disbursements from a broader set of databases (because not all of the data sources used to estimate the historical series extend to 2020), including the UN Office of Humanitarian Assistance Financial Tracking Service and the International Aid Transparency Initiative. We reported all the historic and future spending estimates in inflation-adjusted 2020 US$, 2020 US$ per capita, purchasing-power parity-adjusted US$ per capita, and as a proportion of gross domestic product. We used various models to generate future health spending to 2050. Findings In 2019, health spending globally reached $8. 8 trillion (95% uncertainty interval [UI] 8.7-8.8) or $1132 (1119-1143) per person. Spending on health varied within and across income groups and geographical regions. Of this total, $40.4 billion (0.5%, 95% UI 0.5-0.5) was development assistance for health provided to low-income and middle-income countries, which made up 24.6% (UI 24.0-25.1) of total spending in low-income countries. We estimate that $54.8 billion in development assistance for health was disbursed in 2020. Of this, $13.7 billion was targeted toward the COVID-19 health response. $12.3 billion was newly committed and $1.4 billion was repurposed from existing health projects. $3.1 billion (22.4%) of the funds focused on country-level coordination and $2.4 billion (17.9%) was for supply chain and logistics. Only $714.4 million (7.7%) of COVID-19 development assistance for health went to Latin America, despite this region reporting 34.3% of total recorded COVID-19 deaths in low-income or middle-income countries in 2020. Spending on health is expected to rise to $1519 (1448-1591) per person in 2050, although spending across countries is expected to remain varied. Interpretation Global health spending is expected to continue to grow, but remain unequally distributed between countries. We estimate that development organisations substantially increased the amount of development assistance for health provided in 2020. Continued efforts are needed to raise sufficient resources to mitigate the pandemic for the most vulnerable, and to help curtail the pandemic for all. Copyright (C) 2021 The Author(s). Published by Elsevier Ltd.
|
|
| 8. |
- Nyberg, Solja T., et al.
(författare)
-
Association of alcohol use with years lived without major chronic diseases : A multicohort study from the IPD-Work consortium and UK Biobank
- 2022
-
Ingår i: The Lancet Regional Health - Europe. - : Elsevier. - 2666-7762. ; 19
-
Tidskriftsartikel (refereegranskat)abstract
- Background Heavy alcohol consumption increases the risk of several chronic diseases. In this multicohort study, we estimated the number of life-years without major chronic diseases according to different characteristics of alcohol use.Methods In primary analysis, we pooled individual-level data from up to 129,942 adults across 12 cohort studies with baseline data collection on alcohol consumption, drinking patterns, and history between 1986 and 2005 (the IPD-Work Consortium). Self-reported alcohol consumption was categorised according to UK guidelines - non-drinking (never or former drinkers); moderate consumption (1-14 units); heavy consumption (>14 units per week). We further subdivided moderate and heavy drinkers by binge drinking pattern (alcohol-induced loss of consciousness). In addition, we assessed problem drinking using linked data on hospitalisations due to alcohol abuse or poisoning. Follow-up for chronic diseases for all participants included incident type 2 diabetes, coronary heart disease, stroke, cancer, and respiratory disease (asthma and chronic obstructive pulmonary disease) as ascertained via linkage to national morbidity and mortality registries, repeated medical examinations, and/or self-report. We estimated years lived without any of these diseases between 40 and 75 years of age according to sex and characteristics of alcohol use. We repeated the main analyses using data from 427,621 participants in the UK Biobank cohort study.Findings During 1.73 million person-years at risk, 22,676 participants in IPD-Work cohorts developed at least one chronic condition. From age 40 to 75 years, never-drinkers [men: 29.3 (95%CI 27.9-30.8) years, women 29.8 (29.2 - 30.4) years)] and moderate drinkers with no binge drinking habit [men 28.7 (28.4-29.0) years, women 29.6 (29.4-29.7) years] had the longest disease-free life span. A much shorter disease-free life span was apparent in participants who experienced alcohol poisoning [men 23.4 (20.9-26.0) years, women 24.0 (21.4-26.5) years] and those with self-reported heavy overall consumption and binge drinking [men: 26.0 (25.3-26.8), women 27.5 (26.4 - 28.5) years]. The pattern of results for alcohol poisoning and self-reported alcohol consumption was similar in UK Biobank. In IPD-Work and UK Biobank, differences in disease-free years between self-reported moderate drinkers and heavy drinkers were 1.5 years or less.Interpretation Individuals with alcohol poisonings or heavy self-reported overall consumption combined with a binge drinking habit have a marked 3- to 6-year loss in healthy longevity. Differences in disease-free life between categories of self-reported weekly alcohol consumption were smaller.
|
|
| 9. |
- Nyberg, Solja T., et al.
(författare)
-
Association of Healthy Lifestyle With Years Lived Without Major Chronic Diseases
- 2020
-
Ingår i: JAMA Internal Medicine. - : American Medical Association (AMA). - 2168-6106 .- 2168-6114. ; 180:5, s. 760-768
-
Tidskriftsartikel (refereegranskat)abstract
- This cohort study examines disease-free life-years in participants with varying combinations of lifestyle risk factors.Question: Are different combinations of lifestyle factors associated with years lived without chronic diseases?Findings: In a multicohort study of 116 & x202f;043 participants, a statistically significant association between overall healthy lifestyle score and an increased number of disease-free life-years was noted. Of 16 different lifestyle profiles studied, the 4 that were associated with the greatest disease-free life years included body mass index lower than 25 and at least 2 of 3 factors: never smoking, physical activity, and moderate alcohol consumption.Meaning: Various healthy lifestyle profiles appear to be associated with extended gains in life lived without type 2 diabetes, cardiovascular and respiratory diseases, and cancer.Importance: It is well established that selected lifestyle factors are individually associated with lower risk of chronic diseases, but how combinations of these factors are associated with disease-free life-years is unknown.Objective: To estimate the association between healthy lifestyle and the number of disease-free life-years.Design, Setting, and Participants: A prospective multicohort study, including 12 European studies as part of the Individual-Participant-Data Meta-analysis in Working Populations Consortium, was performed. Participants included 116 & x202f;043 people free of major noncommunicable disease at baseline from August 7, 1991, to May 31, 2006. Data analysis was conducted from May 22, 2018, to January 21, 2020.Exposures: Four baseline lifestyle factors (smoking, body mass index, physical activity, and alcohol consumption) were each allocated a score based on risk status: optimal (2 points), intermediate (1 point), or poor (0 points) resulting in an aggregated lifestyle score ranging from 0 (worst) to 8 (best). Sixteen lifestyle profiles were constructed from combinations of these risk factors.Main Outcomes and Measures: The number of years between ages 40 and 75 years without chronic disease, including type 2 diabetes, coronary heart disease, stroke, cancer, asthma, and chronic obstructive pulmonary disease.Results: Of the 116 & x202f;043 people included in the analysis, the mean (SD) age was 43.7 (10.1) years and 70 & x202f;911 were women (61.1%). During 1.45 million person-years at risk (mean follow-up, 12.5 years; range, 4.9-18.6 years), 17 & x202f;383 participants developed at least 1 chronic disease. There was a linear association between overall healthy lifestyle score and the number of disease-free years, such that a 1-point improvement in the score was associated with an increase of 0.96 (95% CI, 0.83-1.08) disease-free years in men and 0.89 (95% CI, 0.75-1.02) years in women. Comparing the best lifestyle score with the worst lifestyle score was associated with 9.9 (95% CI 6.7-13.1) additional years without chronic diseases in men and 9.4 (95% CI 5.4-13.3) additional years in women (P < .001 for dose-response). All of the 4 lifestyle profiles that were associated with the highest number of disease-free years included a body-mass index less than 25 (calculated as weight in kilograms divided by height in meters squared) and at least 2 of the following factors: never smoking, physical activity, and moderate alcohol consumption. Participants with 1 of these lifestyle profiles reached age 70.3 (95% CI, 69.9-70.8) to 71.4 (95% CI, 70.9-72.0) years disease free depending on the profile and sex.Conclusions and Relevance: In this multicohort analysis, various healthy lifestyle profiles appeared to be associated with gains in life-years without major chronic diseases.
|
|
| 10. |
- Razavi, Homie A., et al.
(författare)
-
Hepatitis D double reflex testing of all hepatitis B carriers in low-HBV- and high-HBV/HDV-prevalence countries
- 2023
-
Ingår i: JOURNAL OF HEPATOLOGY. - : Elsevier. - 0168-8278 .- 1600-0641. ; 79:2, s. 576-580
-
Tidskriftsartikel (refereegranskat)abstract
- Hepatitis D virus (HDV) infection occurs as a coinfection with hepatitis B and increases the risk of hepatocellular carcinoma, decompensated cirrhosis, and mortality compared to hepatitis B virus (HBV) monoinfection. Reliable estimates of the prevalence of HDV infection and disease burden are essential to formulate strategies to find coinfected individuals more effectively and efficiently. The global prevalence of HBV infections was estimated to be 262,240,000 in 2021. Only 1,994,000 of the HBV in-fections were newly diagnosed in 2021, with more than half of the new diagnoses made in China. Our initial estimates indicated a much lower prevalence of HDV antibody (anti-HDV) and HDV RNA positivity than previously reported in published studies. Ac-curate estimates of HDV prevalence are needed. The most effective method to generate estimates of the prevalence of anti-HDV and HDV RNA positivity and to find undiagnosed individuals at the national level is to implement double reflex testing. This re-quires anti-HDV testing of all hepatitis B surface antigen-positive individuals and HDV RNA testing of all anti-HDV-positive in-dividuals. This strategy is manageable for healthcare systems since the number of newly diagnosed HBV cases is low. At the global level, a comprehensive HDV screening strategy would require only 1,994,000 HDV antibody tests and less than 89,000 HDV PCR tests. Double reflex testing is the preferred strategy in countries with a low prevalence of HBV and those with a high prevalence of both HBV and HDV. For example, in the European Union and North America only 35,000 and 22,000 cases, respectively, will require anti-HDV testing annually.
|
|
