| 1. |
- Dyrskjøt, Lars, et al.
(författare)
-
Gene expression signatures predict outcome in non-muscle-invasive bladder carcinoma : a multicenter validation study
- 2007
-
Ingår i: Clinical Cancer Research. - 1078-0432 .- 1557-3265. ; 13:12, s. 3545-3551
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: Clinically useful molecular markers predicting the clinical course of patients diagnosed with non–muscle-invasive bladder cancer are needed to improve treatment outcome. Here, we validated four previously reported gene expression signatures for molecular diagnosis of disease stage and carcinoma in situ (CIS) and for predicting disease recurrence and progression. Experimental Design: We analyzed tumors from 404 patients diagnosed with bladder cancer in hospitals in Denmark, Sweden, England, Spain, and France using custom microarrays. Molecular classifications were compared with pathologic diagnosis and clinical outcome. Results: Classification of disease stage using a 52-gene classifier was found to be highly significantly correlated with pathologic stage (P < 0.001). Furthermore, the classifier added information regarding disease progression of Ta or T1 tumors (P < 0.001). The molecular 88-gene progression classifier was highly significantly correlated with progression-free survival (P < 0.001) and cancer-specific survival (P = 0.001). Multivariate Cox regression analysis showed the progression classifier to be an independently significant variable associated with disease progression after adjustment for age, sex, stage, grade, and treatment (hazard ratio, 2.3; P = 0.007). The diagnosis of CIS using a 68-gene classifier showed a highly significant correlation with histopathologic CIS diagnosis (odds ratio, 5.8; P < 0.001) in multivariate logistic regression analysis. Conclusion: This multicenter validation study confirms in an independent series the clinical utility of molecular classifiers to predict the outcome of patients initially diagnosed with non–muscle-invasive bladder cancer. This information may be useful to better guide patient treatment.
|
|
| 2. |
- Jensen, Jan S., et al.
(författare)
-
Safety in simple versus complex stenting of coronary artery bifurcation lesions : The nordic bifurcation study 14-month follow-up results
- 2008
-
Ingår i: EuroIntervention : journal of EuroPCR in collaboration with the Working Group on Interventional Cardiology of the European Society of Cardiology. - 1774-024X. ; 4:2, s. 229-233
-
Tidskriftsartikel (refereegranskat)abstract
- AIMS: The risk of stent thrombosis has been reported to increase with percutaneous coronary intervention (PCI) complexity. The present study reports the pre-specified secondary endpoint of a 14-month stent thrombosis and major adverse cardiac events in patients stented with a simple versus a complex bifurcation technique using sirolimus eluting stents (SES). METHODS AND RESULTS: A total of 413 patients with a coronary bifurcation lesion were randomised to a simple treatment strategy; stenting of main vessel and optional stenting of side branch (MV group), or to a complex stenting strategy; stenting of both main vessel and side branch (MV+SB group). Mortality data were available in all patients and 14-month clinical follow-up data in 395 (96%) of the patients. After 14 months, the rates of definite, probable and possible stent thrombosis (ARC criteria) were 1.0% vs. 0.5%, 1.0% vs. 0% and 0.5% vs. 0% (ns) in the MV and in the MV+SB groups, respectively. Rates of MACE were 9.5% in the MV group and 8.2% in the MV+SB group (ns). Total death was seen in 2.4% vs. 1.0% and non-PCI related myocardial infarction in 2.0% vs. 1.0% in the MV and the MV+SB groups, respectively. CONCLUSIONS: After 14 months, two months after recommended cessation of dual antiplatelet therapy, the rates of stent thrombosis and major adverse cardiac events were low and independent of treatment complexity in patients treated with SES for coronary artery bifurcation lesions.
|
|
| 3. |
|
|
| 4. |
- Steigen, Terje K., et al.
(författare)
-
Randomized study on simple versus complex stenting of coronary artery bifurcation lesions : the Nordic bifurcation study
- 2006
-
Ingår i: Circulation. - 0009-7322 .- 1524-4539. ; 114:18, s. 1955-1961
-
Tidskriftsartikel (refereegranskat)abstract
- Background - The optimal stenting strategy in coronary artery bifurcation lesions is unknown. In the present study, a strategy of stenting both the main vessel and the side branch ( MV + SB) was compared with a strategy of stenting the main vessel only, with optional stenting of the side branch ( MV), with sirolimus-eluting stents. Methods and Results - A total of 413 patients with a bifurcation lesion were randomized. The primary end point was a major adverse cardiac event: cardiac death, myocardial infarction, target-vessel revascularization, or stent thrombosis after 6 months. At 6 months, there were no significant differences in rates of major adverse cardiac events between the groups ( MV + SB 3.4%, MV 2.9%; P = NS). In the MV + SB group, there were significantly longer procedure and fluoroscopy times, higher contrast volumes, and higher rates of procedure-related increases in biomarkers of myocardial injury. A total of 307 patients had a quantitative coronary assessment at the index procedure and after 8 months. The combined angiographic end point of diameter stenosis > 50% of main vessel and occlusion of the side branch after 8 months was found in 5.3% in the MV group and 5.1% in the MV + SB group ( P = NS). Conclusions - Independent of stenting strategy, excellent clinical and angiographic results were obtained with percutaneous treatment of de novo coronary artery bifurcation lesions with sirolimus-eluting stents. The simple stenting strategy used in the MV group was associated with reduced procedure and fluoroscopy times and lower rates of procedure-related biomarker elevation. Therefore, this strategy can be recommended as the routine bifurcation stenting technique.
|
|
| 5. |
|
|
| 6. |
- Ali, M., et al.
(författare)
-
Reduced photoluminescence from InGaN/GaN multiple quantum well structures following 40 MeV iodine ion irradiation
- 2009
-
Ingår i: Physica. B, Condensed matter. - : Elsevier. - 0921-4526 .- 1873-2135. ; 404:23-24, s. 4925-4928
-
Tidskriftsartikel (refereegranskat)abstract
- The effects following ion irradiation of GaN-based devices are still limited. Here we present data on the photoluminescence (PL) emitted from InGaN/GaN multiple quantum well (MQW) structures, which have been exposed to 40 MeV I ion irradiation. The PL is reduced as a function of applied ion fluence, with essentially no PL signal left above 1011 ions/cm2. It is observed that even the ion fluences in the 109 ions/cm2 range have a pronounced effect on the photoluminescence properties of the MQW structures. This may have consequences concerning application of InGaN/GaN MQW’s in radiation-rich environments, in addition to defect build-up during ion beam analysis.
|
|
| 7. |
- Arnbjerg, Lene M., et al.
(författare)
-
Structure and Dynamics for LiBH4-LiCl Solid Solutions
- 2009
-
Ingår i: Chemistry of Materials. - : American Chemical Society (ACS). - 0897-4756 .- 1520-5002. ; 21:24, s. 5772-5782
-
Tidskriftsartikel (refereegranskat)abstract
- A Surprisingly high degree of structural and compositional dynamics is observed in the system LiBH4-LiCl as a function of temperature and time. Rietveld refinement of synchrotron radiation powder X-ray diffraction (SR-PXD) data reveals that Cl- readily substitutes for BH4- in the Structure of LiBH4. Prolonged heating a sample of LiBH4-LiCl (1:1 molar ratio) above the phase transition temperature and below the melting point (108 < T < 275 degrees C) can produce highly chloride substituted hexagonal lithium borohydride, h-Li(BH4)(l-x)Cl-x, e.g., x similar to 0.42, after heating from room temperature (RT) to 224 degrees C at 2.5 degrees C/min. LiCl has a higher solubility in h-LiBH4 its compared to orthorhombic lithium borohydride, o-LiBH4, which is illustrated by a LiBH4-LiCl (1:1) sample equilibrated at 245 degrees C for 24 days and left at RT for another 13 months. Rietveld refinement reveals that this sample contains o-Li(BH4)(0.91)Cl-0.09 and LiCl. This illustrates a significantly faster dissolution of LiCl in h-LiBH4 its compared to a slower segregation of LiCl from o-LiBH4, which is also demonstrated by in situ SR-PXD from three cycles of heating and cooling of the same Li(BH4)(0.91)Cl-0.09 sample. The substitution of the smaller Cl- for the larger BH4- ion is clearly observed as a reduction in the unit cell volume as a function of time and temperature. A significant stabilization of h-LiBH4 is found to depend on the degree of anion substitution. Variable temperature solid-state magic-angle spinning (MAS) Li-7 and B-13 NMR experiments oil pure LiBH4 show an increase in full width at half maximum (fwhm) when approaching the phase transition from o- to h-LiBH4, which indicates an increase of the relaxation rate (i.e. T-2 decreases). A less pronounced effect is observed for ion-substituted Li(BH4)(1-x)Cl-x, 0.09 < x < 0.42. The MAS NMR experiments also demonstrate a higher degree of motion in the hexagonal phase, i.e., fwhm is reduced by more than a Factor of 10 at the o- to h-LiBH4 phase transition.
|
|
| 8. |
- Azarov, A. Yu., et al.
(författare)
-
Dopant distribution in high fluence Fe implanted GaN
- 2008
-
Ingår i: Journal of Applied Physics. - : AIP Publishing. - 0021-8979 .- 1089-7550. ; 104:5, s. 053509-
-
Tidskriftsartikel (refereegranskat)abstract
- Undoped wurtzite GaN epilayers implanted at room temperature with 50-325 keV Fe+ ions in the fluence range of 10(15)-10(17) ions/cm(2) are studied by a combination of Rutherford backscattering/channeling spectrometry and time-of-flight elastic recoil detection analysis. The results show an enhanced Fe concentration close to the surface for high ion fluences (>1 X 10(16) cm(-2)), which increases with the ion fluence. Annealing at 800 degrees C for 30 min has a negligible effect on the Fe distribution in the material bulk, but further increases the Fe concentration near the surface. Our findings can be understood by radiation enhanced diffusion during ion implantation and an increased Fe diffusivity in the near surface region with distorted stoichiometry, or formation of secondary phases and precipitates for the highest doses. The simulation shows that, if enhanced diffusion is the reason for Fe buildup at the surface, both radiation enhanced diffusion and the thermal diffusion of Fe atoms near the surface, need to be at least five times larger than ordinary bulk diffusion to explain the increased Fe surface concentration.
|
|
| 9. |
- Azarov, A.Yu., et al.
(författare)
-
High dose Fe implantation of gan : Damage build-up and dopant redistribution
- 2008
-
Ingår i: PROCEEDINGS OF THE 17TH INTERNATIONAL VACUUM CONGRESS/13TH INTERNATIONAL CONFERENCE ON SURFACE SCIENCE/INTERNATIONAL CONFERENCE ON NANOSCIENCE AND TECHNOLOGY. - : IOP Publishing. ; 100:4, s. 042036-
-
Konferensbidrag (refereegranskat)abstract
- Undoped GaN epilayers implanted at room temperature with 50-325 keV Fe + ions in the fluence range of 1015 - 1017 ions/cm are studied by a combination of Rutherford backscattering/channeling spectrometry and time-of-flight elastic recoil detection analysis. Results show that for high ion fluences (>1 × 1016 cm-2) enhanced Fe concentration closer to the surface is observed. The Fe redistribution towards the surface increases as the ion fluence increases. Our findings are attributed to radiation enhanced diffusion during ion implantation and increasing of Fe diffusivity in the implantation-induced amorphous phase near the surface.
|
|
| 10. |
- Boström, Tobias, et al.
(författare)
-
ERDA of Ni-Al2O3/SiO2 solar thermal selective absorbers
- 2008
-
Ingår i: Solar Energy Materials and Solar Cells. - : Elsevier BV. - 0927-0248 .- 1879-3398. ; 92:10, s. 1177-1182
-
Tidskriftsartikel (refereegranskat)abstract
- Thin film materials for the use in solar thermal absorbers have been investigated using time-of-flight energy elastic recoil detection analysis (ERDA). The ERDA measurements proved to be very efficient in detecting the elemental depth composition of a selective solar absorber. The three-layer absorber is composed of an 80% nickel-20% alumina film at the base, a 40% nickel-60% alumina layer in the middle and finally an AR film of silica or hybrid-silica film at the top. The difference between solution volume percent and actual volume percent could be investigated when studying individual nickel-alumina films with varying ratios coated on glass substrates. The result showed that there was a maximum difference of 3% between the calculated solution volume percent and the actual volume percentages in the solid films. The ERDA measurements also indicate that about 15% of the nickel found in the nickel-alumina composite films is bound in the form of NiO.
|
|
