| 1. |
- Fard, Ali, 1978-
(författare)
-
Analysis and Design of Low-Phase-Noise Integrated Voltage-Controlled Oscillators for Wide-Band RF Front-Ends
- 2006
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The explosive development of wireless communication services creates a demand for more flexible and cost-effective communication systems that offer higher data rates. The obvious trend towards small-size and ultra low power systems, in combination with the ever increasing number of applications integrated in a single portable device, tightens the design constraints at hardware and software level. The integration of current mobile systems with the third generation systems exemplifies and emphasizes the need of monolithic multi-band transceivers. A long term goal is a software defined radio, where several communication standards and applications are embedded and reconfigured by software. This motivates the need for highly flexible and reconfigurable analog radio frequency (RF) circuits that can be fully integrated in standard low-cost complementary metal-oxide-semiconductor (CMOS) technologies.In this thesis, the Voltage-Controlled Oscillator (VCO), one of the main challenging RF circuits within a transceiver, is investigated for today’s and future communication systems. The contributions from this work may be divided into two parts. The first part exploits the possibility and design related issues of wide-band reconfigurable integrated VCOs in CMOS technologies. Aspects such as frequency tuning, power dissipation and phase noise performance are studied and design oriented techniques for wide-band circuit solutions are proposed. For demonstration of these investigations several fully functional wide-band multi-GHz VCOs are implemented and characterized in a 0.18µm CMOS technology.The second part of the thesis concerns theoretical analysis of phase noise in VCOs. Due to the complex process of conversion from component noise to phase noise, computer aided methods or advanced circuit simulators are usually used for evaluation and prediction of phase noise. As a consequence, the fundamental properties of different noise sources and their impact on phase noise in commonly adopted VCO topologies have so far not been completely described. This in turn makes the optimization process of integrated VCOs a very complex task. To aid the design and to provide a deeper understanding of the phase noise mechanism, a new approach based on a linear time-variant model is proposed in this work. The theory allows for derivation of analytic expressions for phase noise, thereby, providing excellent insight on how to minimize and optimize phase noise in oscillators as a function of circuit related parameters. Moreover, it enables a fair performance comparison of different oscillator topologies in order to ascertain which structure is most suitable depending on the application of interest. The proposed method is verified with very good agreement against both advanced circuit simulations and measurements in CMOS and bipolar technologies. As a final contribution, using the knowledge gained from the theoretical analysis, a fully integrated 0.35µm CMOS VCO with superior phase noise performance and power dissipation is demonstrated.
|
|
| 2. |
- Mahlin, Denny, et al.
(författare)
-
A novel powder sample holder for the determination of glass transition temperatures by DMA
- 2009
-
Ingår i: International Journal of Pharmaceutics. - : Elsevier BV. - 0378-5173 .- 1873-3476. ; 371:1-2, s. 120-125
-
Tidskriftsartikel (refereegranskat)abstract
- The use of a new sample holder for dynamic mechanical analysis (DMA) as a means to characterise the Tg of powdered hydroxypropyl methyl cellulose (HPMC) has been investigated. A sample holder was constructed consisting of a rectangular stainless steel container and a lid engineered to fit exactly within the walls of the container when clamped within a TA instruments Q800 DMA in dual cantilever configuration. Physical mixtures of HPMC (E4M) and aluminium oxide powders were placed in the holder and subjected to oscillating strains (1 Hz, 10 Hz and 100 Hz) whilst heated at 3 degrees C/min. The storage and loss modulus signals showed a large reduction in the mechanical strength above 150 degrees C which was attributed to a glass transition. Optimal experimental parameters were determined using a design of experiment procedure and by analysing the frequency dependence of Tg in Arrhenius plots. The parameters were a clamping pressure of 62 kPa, a mass ratio of 0.2 HPMC in aluminium oxide, and a loading mass of either 120 mg or 180 mg. At 1 Hz, a Tg of 177+/-1.2 degrees C (n=6) for powdered HPMC was obtained. In conclusion, the new powder holder was capable of measuring the Tg of pharmaceutical powders and a simple optimization protocol was established, useful in further applications of the DMA powder holder.
|
|
