| 1. |
- Khan, Ziyauddin, et al.
(författare)
-
Towards printable water-in-polymer salt electrolytes for high power organic batteries
- 2022
-
Ingår i: Journal of Power Sources. - : Elsevier. - 0378-7753 .- 1873-2755. ; 524
-
Tidskriftsartikel (refereegranskat)abstract
- Internet-of-things which requires electronics, energy convertor and storage must be low-cost, recyclable and environmentally friendly. In the development of printed batteries, ideally all the components (electrode and electrolyte) must be printable to ensure low-cost manufacturing via printing technologies. Most of the printed batteries suffer with low power. One of the reasons is the poor ionic conductivity of the electrolyte due to the high viscosity needed for printing relatively thick layers. In the present work we have demonstrated a new class of electrolyte promising for printed organic batteries following the concept of water-in-polymer salt electrolytes (WIPSEs). These highly concentrated electrolytes of potassium polyacrylate are non-flammable, low cost and environmentally friendly. They possess high ionic conductivities (45-87 mS/cm) independent on the macroscopic viscosities varying from 7 to 33000 cP. The decoupling between ionic transport and macroscopic viscosity enables us to demonstrate organic batteries based on WIPSEs that can deliver a high and constant power (similar to 4.5 kW/kg; 7.1-11 mW/cm(2)) independent on the viscosity of the electrolytes. The tunability of the viscosity presents a prerequisite for printed technology manufacturing and compatibility with printed batteries.
|
|
| 2. |
- Khan, Ziyauddin, et al.
(författare)
-
Water-in-Polymer Salt Electrolyte for Slow Self-Discharge in Organic Batteries
- 2022
-
Ingår i: Advanced Energy and Sustainability Research. - : WILEY. - 2699-9412. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- In electrochemical energy storage devices (ESDs), organic electrolytes are typically used for wide operational potential window, yet they suffer with cost, environmental, flammability issues, and low ionic conductivity when compared with water-based electrolytes. Hence, for large-scale applications that require high power and safety, presently there is no true solution. Though water-based electrolytes have higher ionic conductivities, and are cost-effective and nonflammable, their high self-discharge rate with organic/carbon-based electrodes impedes their commercialization. It is found out that highly concentrated polymer electrolytes on the concept of "water-in-salt electrolyte" lead to extremely low leakage current within the electrochemical stability window (ESW) of water, thus solving the issue of self-discharge in organic/carbon-based ESDs. Herein, potassium polyacrylate (PAAK) is prepared as "water-in-polymer salt electrolyte" (WIPSE) and tested for one of most abundant wood-based biopolymer lignin and polyimide as positive and negative electrodes, respectively, in both half-cell and full-cell. The device shows an open-circuit voltage drops <0.45V in 100h setting a record for organic batteries using aqueous electrolyte. The high ionic conductivity (40-120mScm(-1)) nonflammability of PAAK with high ESW (3.1V) opens a new direction for truly safe, sustainable, and high power (6.8kWkg(-1)) organic ESD manufactured by printing technologies.
|
|
| 3. |
- Kumar, Divyaratan, et al.
(författare)
-
Self-Discharge in Batteries Based on Lignin and Water-in-Polymer Salt Electrolyte
- 2022
-
Ingår i: Advanced Energy and Sustainability Research. - : Wiley. - 2699-9412. ; 3:10
-
Tidskriftsartikel (refereegranskat)abstract
- Lignin, the most abundant biopolymer on earth, has been explored as an electroactive material in battery applications. One essential feature for such lignin-based batteries to reach successful usage and implementation, e.g., large-scale stationary grid applications, is to have slow self-discharge characteristics on top of the essential safety and life-cycle properties. Water-in-polymer salt electrolytes (WIPSEs) have been demonstrated as an attractive route to solve this issue; however, little has been done to understand the fundamentals of actual self-discharge mechanisms. Herein, the impact of some critical chemical and physical parameters (pH, dissolved oxygen, viscosity, and cutoff potential) on self-discharge of batteries based on WIPSE and lignin has been investigated. The pH range is crucial as there is an interplay between long-term stability and high energy density. Indeed, lignin derivatives typically store relatively more charge in acidic media but later promote corrosion affecting device stability. A robust and high-performing organic battery, incorporating potassium polyacrylate as WIPSE, is demonstrated, which expresses good self-discharge behavior for a broad range of pH and with little impact on the atmosphere used for manufacturing. It is believed that the investigation will provide critical insights to the research community to promote the advancement of printed large-scale energy storage devices.
|
|
| 4. |
- Shtepliuk, Ivan, et al.
(författare)
-
Understanding of the Electrochemical Behavior of Lithium at Bilayer-Patched Epitaxial Graphene/4H-SiC
- 2022
-
Ingår i: Nanomaterials. - : MDPI AG. - 2079-4991. ; 12:13
-
Tidskriftsartikel (refereegranskat)abstract
- Novel two-dimensional materials (2DMs) with balanced electrical conductivity and lithium (Li) storage capacity are desirable for next-generation rechargeable batteries as they may serve as high-performance anodes, improving output battery characteristics. Gaining an advanced understanding of the electrochemical behavior of lithium at the electrode surface and the changes in interior structure of 2DM-based electrodes caused by lithiation is a key component in the long-term process of the implementation of new electrodes into to a realistic device. Here, we showcase the advantages of bilayer-patched epitaxial graphene on 4H-SiC (0001) as a possible anode material in lithium-ion batteries. The presence of bilayer graphene patches is beneficial for the overall lithiation process because it results in enhanced quantum capacitance of the electrode and provides extra intercalation paths. By performing cyclic voltammetry and chronoamperometry measurements, we shed light on the redox behavior of lithium at the bilayer-patched epitaxial graphene electrode and find that the early-stage growth of lithium is governed by the instantaneous nucleation mechanism. The results also demonstrate the fast lithium-ion transport (~4.7–5.6 × 10−7 cm2·s−1) to the bilayer-patched epitaxial graphene electrode. Raman measurements complemented by in-depth statistical analysis and density functional theory calculations enable us to comprehend the lithiation effect on the properties of bilayer-patched epitaxial graphene and ascribe the lithium intercalation-induced Raman G peak splitting to the disparity between graphene layers. The current results are helpful for further advancement of the design of graphene-based electrodes with targeted performance.
|
|
