| 1. |
- Kim, Min-Jeong, et al.
(författare)
-
Intrinsic Seebeck coefficients of 2D polycrystalline PtSe2 semiconducting films through two-step annealing
- 2023
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 11:11, s. 5714-5724
-
Tidskriftsartikel (refereegranskat)abstract
- Because of the high contact resistance between a metal and a film, evaluating the intrinsic Seebeck coefficient of large-area two-dimensional (2D) semiconducting films with high-resistance is challenging. Here, we report a simple scheme to measure the large-area Seebeck coefficients of 2D polycrystalline platinum diselenide (PtSe2) thin films, whose electrical resistance (>2 M omega) is too high to measure the thermoelectric (TE) properties, by thermal annealing. As-prepared PtSe2 thin films deposited on sapphire substrates and treated by a two-step thermal annealing process at 574 K exhibited an intrinsic Seebeck coefficient > similar to 160 mu V K-1, which is 400% higher than that of the single-crystalline PtSe2 bulk, under a temperature gradient of up to 5 K along the samples. In addition, we confirm that the in-plane Seebeck coefficient of the two-step annealed samples was independent of the metal electrode. In addition, the role of thermal annealing in intrinsically-high-resistance 2D PtSe2 semiconducting films based on the atomic-scale crystallographic characteristics of these films and the measured contact resistance between the metal and PtSe2 layer is further discussed. Our finding represents an important achievement in understanding and measuring the Seebeck effect of high-TE-performance 2D layered transition metal dichalcogenide materials.
|
|
| 2. |
- Abbafati, Cristiana, et al.
(författare)
-
- 2020
-
Tidskriftsartikel (refereegranskat)
|
|
| 3. |
- Choi, Jae Won, et al.
(författare)
-
Interface-driven seebeck effect in two-dimensional trilayer-stacked PtTe2/MoS2/MoS2 heterostructures via electron-electron interactions
- 2023
-
Ingår i: Nano Energy. - : Elsevier. - 2211-2855 .- 2211-3282. ; 115
-
Tidskriftsartikel (refereegranskat)abstract
- Two-dimensional (2D) platinum telluride (PtTe2), which is one of the promising metallic transition metal dichalcogenides, has been proven as an essential candidate for electronic devices, magnetic devices, type-II Dirac fermions, topological superconductors, and other optoelectronic applications. However, the formation and thermal transport as important thermoelectric (TE) device applications have not been realized in large-area 2D PtTe2 films due to their semi-metallic properties. Here, we report an innovative approach to enhance the in-plane TE power factors by piling the metallic PtTe2 films on high-resistance (> 10 MO) intrinsic MoS2 films to form bilayer-PtTe2/MoS2 (5 nm/7 nm)//sapphire and trilayer-PtTe2/MoS2/MoS2 (5 nm/7 nm/7 nm)//sapphire heterostructures via wet-transfer stacking method. Such approaches can be achieved by utilizing 2D/2D heterostructure to increase the electron effective mass due to the strong electron-electron interaction at interface under temperature gradient along the samples and ultimately increase Seebeck coefficients via interface-driven Seebeck effect along with a metallic high-conductivity top-PtTe2 films. The trilayer-stacked PtTe2/MoS2/MoS2 heterostructures exhibit an extremely high Seebeck coefficient of 21.6 mu V/K and power factor of similar to 0.2 mW/m.K-2, which are 231 % and similar to 727 %, higher than those of the metallic 5-nm-thick single PtTe2 film on the sapphire substrate, respectively. Our new physics and observation can pave the way toward an effective strategy for understating 2D/2D TMDC heterostructure materials for high Fig.-of-merit TE energy harvesting devices.
|
|
| 4. |
- Kim, Yun-Ho, et al.
(författare)
-
Barrier-free semimetallic PtSe2 contact formation in two-dimensional PtSe2/PtSe2 homostructure for high-performance field-effect transistors
- 2023
-
Ingår i: Applied Surface Science. - : ELSEVIER. - 0169-4332 .- 1873-5584. ; 638
-
Tidskriftsartikel (refereegranskat)abstract
- The search for low-resistance metal contacts on two-dimensional (2D) layered transition metal dichalcogenide (TMDC) materials for high-performance electronic devices remains challenging owing to the lack of interfacial bonding on the surface and a strong Fermi-level pinning effect. In this study, we demonstrate a high-performance 2D large-area homostructured PtSe2/PtSe2 field-effect transistor (FET) by introducing a Schottky-barrier-free and semimetallic PtSe2 film (top layer) as an ohmic contact to semiconducting 2D PtSe2 films (bottom layer) via the wet-transfer method. We successfully improved the current on/off ratio of homostructured 2D/2D PtSe2/PtSe2 FET by more than approximately twofold increase compared to the PtSe2 FET with Pt contacts owing to the barrier-free homojunction PtSe2 layer. Our finding represents a significant achievement in obtaining highperformance electronic devices with barrier-free contacts on homostructured PtSe2 FETs and paves the way toward a promising strategy for wafer-scale 2D TMDC electronic devices.
|
|
| 5. |
- Jung, Se Yong, et al.
(författare)
-
Cardiovascular events and safety outcomes associated with remdesivir using a World Health Organization international pharmacovigilance database
- 2022
-
Ingår i: Clinical and Translational Science. - : Wiley. - 1752-8054 .- 1752-8062. ; 15:2, s. 501-513
-
Tidskriftsartikel (refereegranskat)abstract
- On October 2020, the US Food and Drug Administration (FDA) approved remdesivir as the first drug for the treatment of coronavirus disease 2019 (COVID-19), increasing remdesivir prescriptions worldwide. However, potential cardiovascular (CV) toxicities associated with remdesivir remain unknown. We aimed to characterize the CV adverse drug reactions (ADRs) associated with remdesivir using VigiBase, an individual case safety report database of the World Health Organization (WHO). Disproportionality analyses of CV-ADRs associated with remdesivir were performed using reported odds ratios and information components. We conducted in vitro experiments using cardiomyocytes derived from human pluripotent stem cell cardiomyocytes (hPSC-CMs) to confirm cardiotoxicity of remdesivir. To distinguish drug-induced CV-ADRs from COVID-19 effects, we restricted analyses to patients with COVID-19 and found that, after adjusting for multiple confounders, cardiac arrest (adjusted odds ratio [aOR]: 1.88, 95% confidence interval [CI]: 1.08-3.29), bradycardia (aOR: 2.09, 95% CI: 1.24-3.53), and hypotension (aOR: 1.67, 95% CI: 1.03-2.73) were associated with remdesivir. In vitro data demonstrated that remdesivir reduced the cell viability of hPSC-CMs in time- and dose-dependent manners. Physicians should be aware of potential CV consequences following remdesivir use and implement adequate CV monitoring to maintain a tolerable safety margin.
|
|
| 6. |
- Kim, Min Seo, et al.
(författare)
-
Comparative safety of mRNA COVID-19 vaccines to influenza vaccines: A pharmacovigilance analysis using WHO international database
- 2022
-
Ingår i: Journal of Medical Virology. - : WILEY. - 0146-6615 .- 1096-9071. ; 94:3, s. 1085-1095
-
Tidskriftsartikel (refereegranskat)abstract
- Two messenger RNA (mRNA) vaccines developed by Pfizer-BioNTech and Moderna are being rolled out. Despite the high volume of emerging evidence regarding adverse events (AEs) associated with the COVID-19 mRNA vaccines, previous studies have thus far been largely based on the comparison between vaccinated and unvaccinated control, possibly highlighting the AE risks with COVID-19 mRNA vaccination. Comparing the safety profile of mRNA vaccinated individuals with otherwise vaccinated individuals would enable a more relevant assessment for the safety of mRNA vaccination. We designed a comparative safety study between 18 755 and 27 895 individuals who reported to VigiBase for adverse events following immunization (AEFI) with mRNA COVID-19 and influenza vaccines, respectively, from January 1, 2020, to January 17, 2021. We employed disproportionality analysis to rapidly detect relevant safety signals and compared comparative risks of a diverse span of AEFIs for the vaccines. The safety profile of novel mRNA vaccines was divergent from that of influenza vaccines. The overall pattern suggested that systematic reactions like chill, myalgia, fatigue were more noticeable with the mRNA COVID-19 vaccine, while injection site reactogenicity events were more prevalent with the influenza vaccine. Compared to the influenza vaccine, mRNA COVID-19 vaccines demonstrated a significantly higher risk for a few manageable cardiovascular complications, such as hypertensive crisis (adjusted reporting odds ratio [ROR], 12.72; 95% confidence interval [CI], 2.47-65.54), and supraventricular tachycardia (adjusted ROR, 7.94; 95% CI, 2.62-24.00), but lower risk of neurological complications such as syncope, neuralgia, loss of consciousness, Guillain-Barre syndrome, gait disturbance, visual impairment, and dyskinesia. This study has not identified significant safety concerns regarding mRNA vaccination in real-world settings. The overall safety profile patterned a lower risk of serious AEFI following mRNA vaccines compared to influenza vaccines.
|
|
| 7. |
|
|
| 8. |
- Lee, Seung Won, et al.
(författare)
-
Physical activity and the risk of SARS-CoV-2 infection, severe COVID-19 illness and COVID-19 related mortality in South Korea: a nationwide cohort study
- 2022
-
Ingår i: British Journal of Sports Medicine. - : BMJ PUBLISHING GROUP. - 0306-3674 .- 1473-0480. ; 56:16, s. 901-912
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose To determine the potential associations between physical activity and risk of SARS-CoV-2 infection, severe illness from COVID-19 and COVID-19 related death using a nationwide cohort from South Korea. Methods Data regarding 212 768 Korean adults (age >= 20 years), who tested for SARS-CoV-2, from 1 January 2020 to 30 May 2020, were obtained from the National Health Insurance Service of South Korea and further linked with the national general health examination from 1 January 2018 to 31 December 2019 to assess physical activity levels. SARS-CoV-2 positivity, severe COVID-19 illness and COVID-19 related death were the main outcomes. The observation period was between 1 January 2020 and 31 July 2020. Results Out of 76 395 participants who completed the general health examination and were tested for SARS-CoV-2, 2295 (3.0%) were positive for SARS-CoV-2, 446 (0.58%) had severe illness from COVID-19 and 45 (0.059%) died from COVID-19. Adults who engaged in both aerobic and muscle strengthening activities according to the 2018 physical activity guidelines had a lower risk of SARS-CoV-2 infection (2.6% vs 3.1%; adjusted relative risk (aRR), 0.85; 95% CI 0.72 to 0.96), severe COVID-19 illness (0.35% vs 0.66%; aRR 0.42; 95% CI 0.19 to 0.91) and COVID-19 related death (0.02% vs 0.08%; aRR 0.24; 95% CI 0.05 to 0.99) than those who engaged in insufficient aerobic and muscle strengthening activities. Furthermore, the recommended range of metabolic equivalent task (MET; 500-1000 MET min/week) was associated with the maximum beneficial effect size for reduced risk of SARS-CoV-2 infection (aRR 0.78; 95% CI 0.66 to 0.92), severe COVID-19 illness (aRR 0.62; 95% CI 0.43 to 0.90) and COVID-19 related death (aRR 0.17; 95% CI 0.07 to 0.98). Similar patterns of association were observed in different sensitivity analyses. Conclusion Adults who engaged in the recommended levels of physical activity were associated with a decreased likelihood of SARS-CoV-2 infection, severe COVID-19 illness and COVID-19 related death. Our findings suggest that engaging in physical activity has substantial public health value and demonstrates potential benefits to combat COVID-19.
|
|
| 9. |
- Lee, Won-Yong, et al.
(författare)
-
Abnormal Seebeck Effect in Vertically Stacked 2D/2D PtSe2/PtSe2 Homostructure
- 2022
-
Ingår i: Advanced Science. - : Wiley-VCH Verlagsgesellschaft. - 2198-3844. ; 9:36
-
Tidskriftsartikel (refereegranskat)abstract
- When a thermoelectric (TE) material is deposited with a secondary TE material, the total Seebeck coefficient of the stacked layer is generally represented by a parallel conductor model. Accordingly, when TE material layers of the same thickness are stacked vertically, the total Seebeck coefficient in the transverse direction may change in a single layer. Here, an abnormal Seebeck effect in a stacked two-dimensional (2D) PtSe2/PtSe2 homostructure film, i.e., an extra in-plane Seebeck voltage is produced by wet-transfer stacking at the interface between the PtSe2 layers under a transverse temperature gradient is reported. This abnormal Seebeck effect is referred to as the interfacial Seebeck effect in stacked PtSe2/PtSe2 homostructures. This effect is attributed to the carrier-interface interaction, and has independent characteristics in relation to carrier concentration. It is confirmed that the in-plane Seebeck coefficient increases as the number of stacked PtSe2 layers increase and observed a high Seebeck coefficient exceeding ≈188 µV K−1 at 300 K in a four-layer-stacked PtSe2/PtSe2 homostructure.
|
|
| 10. |
- Lee, Won-Yong, et al.
(författare)
-
Alternatingly Stacked Low- and High-Resistance PtSe2/PtSe2 Homostructures Boost Thermoelectric Power Factors
- 2023
-
Ingår i: Advanced Electronic Materials. - : John Wiley & Sons. - 2199-160X. ; 9:8
-
Tidskriftsartikel (refereegranskat)abstract
- 2D transition-metal dichalcogenide (TMDC) materials are promising candidates with excellent thermoelectric (TE) properties owing to their low dimensionality in electronic and phonon transport. However, the considerable coupling of the Seebeck coefficient and electrical conductivity in such TE materials eventually results in the limit of the TE power factor increase, which severely hinders potential TE device applications. Herein, an alternative approach is demonstrated for breaking the strong coupling between the Seebeck coefficient and electrical conductivity in single TE materials by adopting a novel stacked PtSe2/PtSe2 homostructure. By alternately piling low-resistance (LR) PtSe2 (3 nm) onto high-resistance (HR) PtSe2 (2 nm) as one unit, the Seebeck coefficient and electrical conductivity of such stacked homostructures can be greatly enhanced with slightly improved electrical conductivity, ultimately resulting in a TE power factor in three-unit-stacked homostructures that is approximate to 1,648% higher than that of a single PtSe2 (15 nm) layer with the same thickness. This enhancement is attributed to an independent increase in the Seebeck coefficient, which depends on the interface among the LR and HR PtSe2 layers. The findings pave the way for a method that, unlike power factor optimization in conventional thermoelectric materials, can only utilize the Seebeck coefficient and electrical conductivity of each layer in a stacked homostructure.
|
|
