| 1. |
- Romanelli, F, et al.
(författare)
-
Overview of the JET results
- 2011
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 51:9
-
Tidskriftsartikel (refereegranskat)abstract
- Since the last IAEA Conference JET has been in operation for one year with a programmatic focus on the qualification of ITER operating scenarios, the consolidation of ITER design choices and preparation for plasma operation with the ITER-like wall presently being installed in JET. Good progress has been achieved, including stationary ELMy H-mode operation at 4.5 MA. The high confinement hybrid scenario has been extended to high triangularity, lower ρ*and to pulse lengths comparable to the resistive time. The steady-state scenario has also been extended to lower ρ*and ν*and optimized to simultaneously achieve, under stationary conditions, ITER-like values of all other relevant normalized parameters. A dedicated helium campaign has allowed key aspects of plasma control and H-mode operation for the ITER non-activated phase to be evaluated. Effective sawtooth control by fast ions has been demonstrated with3He minority ICRH, a scenario with negligible minority current drive. Edge localized mode (ELM) control studies using external n = 1 and n = 2 perturbation fields have found a resonance effect in ELM frequency for specific q95values. Complete ELM suppression has, however, not been observed, even with an edge Chirikov parameter larger than 1. Pellet ELM pacing has been demonstrated and the minimum pellet size needed to trigger an ELM has been estimated. For both natural and mitigated ELMs a broadening of the divertor ELM-wetted area with increasing ELM size has been found. In disruption studies with massive gas injection up to 50% of the thermal energy could be radiated before, and 20% during, the thermal quench. Halo currents could be reduced by 60% and, using argon/deuterium and neon/deuterium gas mixtures, runaway electron generation could be avoided. Most objectives of the ITER-like ICRH antenna have been demonstrated; matching with closely packed straps, ELM resilience, scattering matrix arc detection and operation at high power density (6.2 MW m-2) and antenna strap voltages (42 kV). Coupling measurements are in very good agreement with TOPICA modelling. © 2011 IAEA, Vienna.
|
|
| 2. |
- Abel, I, et al.
(författare)
-
Overview of the JET results with the ITER-like wall
- 2013
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 53:10, s. 104002-
-
Tidskriftsartikel (refereegranskat)abstract
- Following the completion in May 2011 of the shutdown for the installation of the beryllium wall and the tungsten divertor, the first set of JET campaigns have addressed the investigation of the retention properties and the development of operational scenarios with the new plasma-facing materials. The large reduction in the carbon content (more than a factor ten) led to a much lower Z(eff) (1.2-1.4) during L- and H-mode plasmas, and radiation during the burn-through phase of the plasma initiation with the consequence that breakdown failures are almost absent. Gas balance experiments have shown that the fuel retention rate with the new wall is substantially reduced with respect to the C wall. The re-establishment of the baseline H-mode and hybrid scenarios compatible with the new wall has required an optimization of the control of metallic impurity sources and heat loads. Stable type-I ELMy H-mode regimes with H-98,H-y2 close to 1 and beta(N) similar to 1.6 have been achieved using gas injection. ELM frequency is a key factor for the control of the metallic impurity accumulation. Pedestal temperatures tend to be lower with the new wall, leading to reduced confinement, but nitrogen seeding restores high pedestal temperatures and confinement. Compared with the carbon wall, major disruptions with the new wall show a lower radiated power and a slower current quench. The higher heat loads on Be wall plasma-facing components due to lower radiation made the routine use of massive gas injection for disruption mitigation essential.
|
|
| 3. |
- Persson, Carina, 1964, et al.
(författare)
-
Nitrogen hydrides in interstellar gas Herschel/HIFI observations towards G10.6-0.4 (W31C)
- 2010
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 521:1, s. Article Number: L45 -
-
Tidskriftsartikel (refereegranskat)abstract
- The HIFI instrument on board the Herschel Space Observatory has been used to observe interstellar nitrogen hydrides along the sight-line towards G10.6-0.4 in order to improve our understanding of the interstellar chemistry of nitrogen. We report observations of absorption in NH N = 1
|
|
| 4. |
- Gallagher, K, et al.
(författare)
-
Inference of abrupt changes in noisy geochemical records using transdimensional changepoint models
- 2011
-
Ingår i: Earth and Planetary Science Letters. - : Elsevier BV. - 0012-821X .- 1385-013X. ; 311:1-2, s. 182-194
-
Tidskriftsartikel (refereegranskat)abstract
- We present a method to quantify abrupt changes (or changepoints) in data series, represented as a function of depth or time. These changes are often the result of climatic or environmental variations and can be manifested in multiple datasets as different responses, but all datasets can have the same changepoint locations/timings. The method we present uses transdimensional Markov chain Monte Carlo to infer probability distributions on the number and locations (in depth or time) of changepoints, the mean values between changepoints and, if required, the noise variance associated with each dataset being considered. This latter point is important as we generally will have limited information on the noise, such as estimates only of measurement uncertainty, and in most cases it is not practical to make repeat sampling/measurement to assess other contributions to the variation in the data. We describe the main features of the approach (and describe the mathematical formulation in supplementary material), and demonstrate its validity using synthetic datasets, with known changepoint structure (number and locations of changepoints) and distribution of noise variance for each dataset. We show that when using multiple data, we expect to achieve better resolution of the changepoint structure than when we use each dataset individually. This is conditional on the validity of the assumption of common changepoints between different datasets. We then apply the method to two sets of real geochemical data, both from peat cores, taken from NE Australia and eastern Tibet. Under the assumption that changes occur at the same time for all datasets, we recover solutions consistent with those previously inferred qualitatively from independent data and interpretations. However, our approach provides a quantitative estimate of the relative probability of the inferred changepoints, allowing an objective assessment of the significance of each change.
|
|
