| 1. |
- Dong, Yu, et al.
(författare)
-
Observation of a Ubiquitous (π, π)-Type Nematic Superconducting Order in the Whole Superconducting Dome of Ultra-Thin BaFe2–xNixAs2 Single Crystals
- 2021
-
Ingår i: Chinese Physics Letters. - : Institute of Physics Publishing (IOPP). - 0256-307X .- 1741-3540. ; 38:9
-
Tidskriftsartikel (refereegranskat)abstract
- In iron-based superconductors, the (0, pi) or (pi, 0) nematicity, which describes an electronic anisotropy with a four-fold symmetry breaking, is well established and believed to be important for understanding the superconducting mechanism. However, how exactly such a nematic order observed in the normal state can be related to the superconducting pairing is still elusive. Here, by performing angular-dependent in-plane magnetoresistivity using ultra-thin flakes in the steep superconducting transition region, we unveil a nematic superconducting order along the (pi, pi) direction in electron-doped BaFe2 - x Ni x As2 from under-doped to heavily overdoped regimes with x = 0.065-0.18. It shows superconducting gap maxima along the (pi, pi) direction rotated by 45 degrees from the nematicity along (0, pi) or (pi, 0) direction observed in the normal state. A similar (pi, pi)-type nematicity is also observed in the under-doped and optimally doped hole-type Ba1 - y K y Fe2As2, with y = 0.2-0.5. These results suggest that the (pi, pi) nematic superconducting order is a universal feature that needs to be taken into account in the superconducting pairing mechanism in iron-based superconductors.
|
|
| 2. |
|
|
| 3. |
- Ertoprak, A., et al.
(författare)
-
Lifetimes of core-excited states in semi-magic Rh-95
- 2020
-
Ingår i: European Physical Journal A. - : SPRINGER. - 1434-6001 .- 1434-601X. ; 56:11
-
Tidskriftsartikel (refereegranskat)abstract
- Lifetimes of negative-parity states have been determined in the neutron deficient semi-magic (N = 50) nucleus Rh-95. The fusion-evaporation reaction Ni-58(Ca-40, 3p) was used to populate high-spin states in Rh-95 at the Grand Accelerateur National d'Ions Lourds (GANIL) accelerator facility. The results were obtained using the Doppler Shift Attenuation Method (DSAM) based on the Doppler broadened line shapes produced during the slowing down process of the residual nuclei in a thick 6 mg/cm(2) metallic target. B(M1) and B(E2) reduced transition strengths are compared with predictions from large-scale shell-model calculations. state-of-the-art theory. Remarkably, the structural features up to moderate angular momentum of nuclei immediately below the N = Z = 50 shell closures can be described with high accuracy in a very simple way by shell-model calculations including only the g(9/2) and p(1/2) subshells. Of special interest is the neutron-proton pair coupling scheme which is expected to appear in the heaviest N=Z nuclei [1,2] and the seniority structure of the N = 50 isotones [3-7]. However, multiple core-excited states have been observed in the semi-magic nuclei of the Sn-100 region [8-10]. The theoretical study of those states is a challenging task, which requires a significantly larger model space for their interpretation. Transition probabilities between nuclear states provide important constraints for theoretical modelling of the structure of the nuclei of interest. Our previous lifetime study of the semimagic (N = 50) nucleus Ru-94 [ 11,12] provided information on the electromagnetic decay properties of neutron-core excited states. We now address lifetime measurements in its closest, more neutron deficient, isotone Rh-95 using the same DSAM technique. The experimental results have been interpreted within the framework of large-scale shell-model (LSSM) calculations.
|
|
| 4. |
- Fan, Wenyuan, et al.
(författare)
-
A study of rewetting and conjugate heat transfer influence on dryout and post-dryout phenomena with a multi-domain coupled CFD approach
- 2020
-
Ingår i: International Journal of Heat and Mass Transfer. - : Elsevier BV. - 0017-9310 .- 1879-2189. ; 163
-
Tidskriftsartikel (refereegranskat)abstract
- In the present study, a multi-domain coupled computational fluid dynamics (CFD) approach is developed for the modeling of dryout and post-dryout heat transfer. For the fluid part, the thin film and gas core are modeled by the liquid film model and two-fluid model, respectively. For the solid part, the heating process is modeled by either using a constant heat source or solving the Joule heating problem. The fluid-solid conjugate heat transfer is calculated by using carefully designed coupling schemes which can automatically determine the operation mode for pre- and post-dryout regions. Unlike standalone simulations where only the inner wall temperature is predicted, coupled simulations are able to predict the outer wall temperature, allowing a direct comparison with experiments. Simulations were carried out for a wide range of flow conditions and validated against the corresponding steady state experiments. By newly introducing a film rewetting model, the current CFD code is capable of simulating the transient behavior of dryout. With the rewetting model, the coupled code successfully predicted the dryout hysteresis.
|
|
| 5. |
- Li, Haipeng B., et al.
(författare)
-
A Memristive Element Based on an Electrically Controlled Single-Molecule Reaction
- 2020
-
Ingår i: Angewandte Chemie - International Edition. - : Wiley. - 1433-7851 .- 1521-3773. ; 59:28, s. 11641-11646
-
Tidskriftsartikel (refereegranskat)abstract
- A single-molecule memory element is electrically-controlled using two distinct reaction mechanisms as reported by K. Moth-Poulsen, J. Hihath, and co-workers (DOI:10.1002/anie.202002300). By using separate electrically-controllable reactions for the forward and reverse reactions the bistable norbornadiene-quadricyclane system can be set in either state. The device can be switched through multiple cycles when a square-wave voltage signal is applied to the molecule. Each state has a unique conductance value allowing the system to act as a switch or memory device.
|
|
| 6. |
- Li, Haipeng, et al.
(författare)
-
Democratizing robust SERS nano-sensors for food safety diagnostics
- 2023
-
Ingår i: Chemical Engineering Journal. - 1385-8947 .- 1873-3212. ; 470
-
Tidskriftsartikel (refereegranskat)abstract
- Pesticide residues in food products cause human health concerns through food contamination, thereby necessitating their rapid and facile detection. Although surface-enhanced Raman scattering (SERS) technique can rapidly and reliably detect pesticide residues, its application in food safety diagnostics is restricted by its high expense, low scalability, and low reproducibility of the necessary sensors. Herein, we present a low-cost, large-scale, and highly reproducible nanofabrication route for SERS nano-sensors, based on the thermophoresis-assisted direct deposition of plasmonic core–shell structured Ag-SiO2 nanoparticles produced in the gas phase, on temperature-controlled inexpensive glass substrates. The high-performance SERS substrates were fabricated at a laboratory production rate of 100 samples/hour, demonstrating the scalability and cost-effectiveness of our aerosol manufacturing strategy. Our highly sensitive SERS substrates rapidly and quantitatively detected pesticide residues in fresh orange, indicating their practical applicability for food safety diagnostics.
|
|
| 7. |
- Li, Haipeng, et al.
(författare)
-
SERS Hotspot Engineering by Aerosol Self-Assembly of Plasmonic Ag Nanoaggregates with Tunable Interparticle Distance
- 2022
-
Ingår i: Advanced Science. - : John Wiley and Sons Inc. - 2198-3844. ; 9:22
-
Tidskriftsartikel (refereegranskat)abstract
- Surface-enhanced Raman scattering (SERS) is a powerful sensing technique. However, the employment of SERS sensors in practical applications is hindered by high fabrication costs from processes with limited scalability, poor batch-to-batch reproducibility, substrate stability, and uniformity. Here, highly scalable and reproducible flame aerosol technology is employed to rapidly self-assemble uniform SERS sensing films. Plasmonic Ag nanoparticles are deposited on substrates as nanoaggregates with fine control of their interparticle distance. The interparticle distance is tuned by adding a dielectric spacer during nanoparticle synthesis that separates the individual Ag nanoparticles within each nanoaggregate. The dielectric spacer thickness dictates the plasmonic coupling extinction of the deposited nanoaggregates and finely tunes the Raman hotspots. By systematically studying the optical and morphological properties of the developed SERS surfaces, structure–performance relationships are established and the optimal hot-spots occur for interparticle distance of 1 to 1.5 nm among the individual Ag nanoparticles, as also validated by computational modeling, are identified for the highest signal enhancement of a molecular Raman reporter. Finally, the superior stability and batch-to-batch reproducibility of the developed SERS sensors are demonstrated and their potential with a proof-of-concept practical application in food-safety diagnostics for pesticide detection on fruit surfaces is explored. © 2022 The Authors.
|
|
| 8. |
- Li, Haipeng, et al.
(författare)
-
Underwater source localization in the presence of strong interference
- 2021
-
Ingår i: IET Radar, Sonar and Navigation. - : Institution of Engineering and Technology (IET). - 1751-8784 .- 1751-8792. ; 15:3, s. 226-239
-
Tidskriftsartikel (refereegranskat)abstract
- The underwater localization of a broadband target in the presence of strong interference and noise has been widely investigated. A novel clutter suppression approach based on oblique projections is proposed, exploiting the prior information of the expected target response. The method uses a generalised likelihood ratio formulation to select the oblique projection best matching the measured data. The performance of the proposed method is verified through numerical examples and measured sonar data. The results indicate that the method provides good performance for time difference of arrival estimation and target localization under low signal to clutter ratio as compared to existing methods.
|
|
| 9. |
- Siciliano, M., et al.
(författare)
-
Lifetime measurements in the even-even 102-108Cd isotopes
- 2021
-
Ingår i: Physical Review C. - : American Physical Society. - 2469-9985 .- 2469-9993. ; 104:3
-
Tidskriftsartikel (refereegranskat)abstract
- Background: The heaviest T-z = 0 doubly-magic nucleus, Sn-100, and the neighboring nuclei offer unique opportunities to investigate the properties of nuclear interaction. For instance, the structure of light-Sn nuclei has been shown to be affected by the delicate balance between nuclear-interaction components, such as pairing and quadrupole correlations. From Cd to Te, many common features and phenomena have been observed experimentally along the isotopic chains, leading to theoretical studies devoted to a more general and comprehensive study of the region. In this context, having only two proton holes in the Z = 50 shell, the Cd isotopes are expected to present properties similar to those found in the Sn isotopic chain.Purpose: The aim of this work was to measure lifetimes of excited states in neutron-deficient nuclei in the vicinity of Sn-100.Methods: The neutron-deficient nuclei in the N approximate to Z approximate to 50 region were populated using a multinucleon transfer reaction with a Cd-106 beam and a Mo-92 target. The beamlike products were identified by the VAMOS++ spectrometer, while the gamma rays were detected using the AGATA array. Lifetimes of excited states were determined using the recoil distance Doppler-shift method, employing the Cologne differential plunger.Results: Lifetimes of low-lying states were measured in the even-mass Cd-102-(108) isotopes. In particular, multiple states with excitation energy up to MeV, belonging to various bands, were populated in approximate to 3 Cd-106 via inelastic scattering. The transition strengths corresponding to the measured lifetimes were compared with those resulting from state-of-the-art beyond-mean-field calculations using the symmetry-conserving configuration-mixing approach.Conclusions: Despite the similarities in the electromagnetic properties of the low-lying states, there is a fundamental structural difference between the ground-state bands in the Z = 48 and Z = 50 isotopes. The comparison between experimental and theoretical results revealed a rotational character of the Cd nuclei, which have prolate-deformed ground states with beta(2) approximate to 0.2. At this deformation Z = 48 becomes a closed-shell configuration, which is favored with respect to the spherical one.
|
|
| 10. |
- Wong, Kin Wing, et al.
(författare)
-
CFD STUDIES OF SEPARATE EFFECT FLOW ACCELERATED CORROSION AND EROSION (SEFACE) FACILITY FOR HEAVY LIQUID METAL
- 2023
-
Ingår i: Proceedings of the 30th International Conference on Nuclear Engineering "Nuclear, Thermal, and Renewables. - : American Society of Mechanical Engineers (ASME).
-
Konferensbidrag (refereegranskat)abstract
- Long-term material compatibility in heavy liquid metal (HLM) remains a challenge for the successful deployment of HLM-based technologies. Flow-accelerated corrosion and erosion (FACE) phenomena can lead to continual material deterioration, which needs to be considered throughout the reactor design stage. Nonetheless, known experimental data are inadequate to cover all the prototypical flow regimes during LFR's operation. Modelling of the FAC/FACE phenomena remains mostly in lumped parameter/subchannel scales, where the FAC model is coupled to the bulk flow of the pipe or subchannel. These methodologies might produce a sufficient prediction for the core internals; however, this might not be suitable for the pump impeller due to comparatively greater relative velocity and the occurrence of transient flow patterns near the rotating impeller. To establish an understanding of the connection between turbulence and FACE, the liquid lead-based Separate Effect Flow Accelerated Corrosion and Erosion (SEFACE) facility is currently under design at KTH in the framework of the Sustainable Nuclear Energy Research In Sweden (SUNRISE) project. SEFACE attempts to investigate FACE phenomena in the liquid lead and produce quantifiable validation data for model development. The paper divides itself into two parts. Part I refers to the study of operational conditions in SEFACE via Reynolds Averaged Navier Stokes (RANS) simulation, while Part II deals with the recent attempt on modelling time-dependent flow shear on rotating disks based on large eddy simulation (LES). The paper begins with a brief review of prior studies on flow-accelerated corrosion. Following that, the SEFACE facility's design concept is laid out considering several physical and operational constraints. A periodic wedge of the SEFACE test chamber is chosen to examine the facility's time-averaged behaviour. The k-ω shear stress transport (SST) model was employed for the simulations. The torque prediction on the rotating disk system is verified with the empirical frictional factor prediction. The latest hydrodynamic design enables SEFACE to be spun at 1200 revolutions per minute (corresponding to a maximum velocity of 21 m/s) without causing free surface deformation or excessive pressure. SEFACE permits the collecting of experimental data under the effect of various relative velocities in a single experiment round. The second part of the paper focuses on a recent attempt to determine the wall shear stress distribution on a rotating disk using wall-modelled large eddy simulation (WMLES S-Omega). The obtained amplitude and frequency of wall shear stress fluctuations will aid model development in future.
|
|
