| 1. |
- Li, Junjie, et al.
(författare)
-
A Novel Dry Selective Isotropic Atomic Layer Etching of SiGe for Manufacturing Vertical Nanowire Array with Diameter Less than 20 nm
- 2020
-
Ingår i: Materials. - : MDPI AG. - 1996-1944 .- 1996-1944. ; 13:3
-
Tidskriftsartikel (refereegranskat)abstract
- Semiconductor nanowires have great application prospects in field effect transistors and sensors. In this study, the process and challenges of manufacturing vertical SiGe/Si nanowire array by using the conventional lithography and novel dry atomic layer etching technology. The final results demonstrate that vertical nanowires with a diameter less than 20 nm can be obtained. The diameter of nanowires is adjustable with an accuracy error less than 0.3 nm. This technology provides a new way for advanced 3D transistors and sensors.
|
|
| 2. |
- Radamson, Henry H., et al.
(författare)
-
State of the Art and Future Perspectives in Advanced CMOS Technology
- 2020
-
Ingår i: Nanomaterials. - : MDPI AG. - 2079-4991. ; 10:8
-
Forskningsöversikt (refereegranskat)abstract
- The international technology roadmap of semiconductors (ITRS) is approaching the historical end point and we observe that the semiconductor industry is driving complementary metal oxide semiconductor (CMOS) further towards unknown zones. Today's transistors with 3D structure and integrated advanced strain engineering differ radically from the original planar 2D ones due to the scaling down of the gate and source/drain regions according to Moore's law. This article presents a review of new architectures, simulation methods, and process technology for nano-scale transistors on the approach to the end of ITRS technology. The discussions cover innovative methods, challenges and difficulties in device processing, as well as new metrology techniques that may appear in the near future.
|
|
| 3. |
- Abbafati, Cristiana, et al.
(författare)
-
- 2020
-
Tidskriftsartikel (refereegranskat)
|
|
| 4. |
- Dou, Tianyi, et al.
(författare)
-
Nanoscale Structural Characterization of Individual Viral Particles Using Atomic Force Microscope Infrared (AFM-IR) and Tip-Enhanced Raman Spectroscopy (TERS)
- 2020
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 1520-6882 .- 0003-2700. ; 92:16, s. 11297-11304
-
Tidskriftsartikel (refereegranskat)abstract
- Viruses are infections species that infect a large spectrum of living systems. Although displaying a wide variety of shapes and sizes, they are all composed of nucleic acid encapsulated into a protein capsid. After virions enter the host cell, they replicate to produce multiple copies of themselves. They then lyse the host, releasing virions to infect new cells. High proliferation rate of viruses is the underlying cause of their fast transmission among living species. Although many viruses are harmless, some of them are responsible for severe diseases such as AIDS, viral hepatitis and flu. Traditionally, electron microscopy is used to identify and characterize viruses. This approach is time and labor consuming, which is problematic upon pandemic proliferation of previously unknown viruses. Herein, we demonstrate a novel diagnosis approach for label-free identification and structural characterization of individual viruses that is based on a combination of nanoscale Raman and Infrared spectroscopy. Using atomic force microscopy infrared spectroscopy (AFM-IR), we were able to probe structural organization of the virions of herpes simplex type 1 viruses and bacteriophage MS2. We also showed that tip enhanced Raman spectroscopy could be used to reveal protein secondary structure and amino acid composition of the virus surface. Our results show that AFM-IR and TERS provide different but complimentary information about the structure of complex biological specimens. This structural information can be used for fast and reliable identification of viruses. This nanoscale bimodal imaging approach can be also used to investigate the origin of viral polymorphism and study mechanisms of virion assembly.
|
|
| 5. |
- Wang, Jinshi, et al.
(författare)
-
Improved modeling of heat transfer in dropwise condensation
- 2020
-
Ingår i: International Journal of Heat and Mass Transfer. - : Elsevier BV. - 0017-9310. ; 155
-
Tidskriftsartikel (refereegranskat)abstract
- Dropwise condensation has drawn significant attention due to its efficient heat transfer performance compared to filmwise condensation. In this paper, typical experimental data for dropwise condensation on smooth hydrophobic surfaces were collected as well as the typical available heat transfer models. The comparisons between the prediction results and the experimental data indicated that the existing models were not generally applicable to various conditions. A new model for a vertical smooth surface was developed to predict the heat transfer characteristics of dropwise condensation. The new model was based on the nucleation condensation mechanism, and the total heat transfer on the surface includes the heat through all the droplets and the heat through the surface between the droplets. For the latent heat through the droplets the effect of the contact angle was taken into consideration on the basis of the nucleation condensation mechanism. The surface area between the droplets on the surface was thought to be the bare surface, and sensible heat transferred on the bare surface and the droplets surface was viewed as forced convection heat transfer. The calculation results from the model show that, although the heat transferred by forced convection is greatly dependent on the experimental parameters, it is three orders of magnitude smaller than the latent heat through the droplets. Comparisons show that the present model has better prediction precision, with an error range of -35–20% for 87.39% of the data and an error range of -35–25% for 90.37% of the data. The findings obtained from the model suggest that the heat transfer rate and the critical nucleation radius for a single droplet and the droplet size distribution are remarkably affected by the contact angle. In fact, a smaller contact angle enhances the condensation heat transfer and increases the nucleation density. In addition, the thickness of the promoter layer weakens the condensation heat transfer and decreases the nucleation density.
|
|
