| 1. |
- Kristan, Matej, et al.
(författare)
-
The Ninth Visual Object Tracking VOT2021 Challenge Results
- 2021
-
Ingår i: 2021 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW 2021). - : IEEE COMPUTER SOC. - 9781665401913 ; , s. 2711-2738
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2021 is the ninth annual tracker benchmarking activity organized by the VOT initiative. Results of 71 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in recent years. The VOT2021 challenge was composed of four sub-challenges focusing on different tracking domains: (i) VOT-ST2021 challenge focused on short-term tracking in RGB, (ii) VOT-RT2021 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2021 focused on long-term tracking, namely coping with target disappearance and reappearance and (iv) VOT-RGBD2021 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2021 dataset was refreshed, while VOT-RGBD2021 introduces a training dataset and sequestered dataset for winner identification. The source code for most of the trackers, the datasets, the evaluation kit and the results along with the source code for most trackers are publicly available at the challenge website(1).
|
|
| 2. |
- Li, Haimeng, et al.
(författare)
-
Sleep microenvironment improvement for the acute plateau entry population through a novel nasal oxygen supply system
- 2024
-
Ingår i: Building and Environment. - : Elsevier. - 0360-1323 .- 1873-684X. ; 256
-
Tidskriftsartikel (refereegranskat)abstract
- Most people who have moved to high-altitude areas temporarily suffer from sleep disorders. Sleep deprivation negatively affects not only people's daytime activities but also their health. However, most of the existing nonpharmaceutical intervention methods have the problems of discomfort, restricted movement, or high cost. This study involved the use of an oxygen-rich flow of air in the breathing area during sleep to fight hypoxia and aid with altitude acclimatization when people first traveled to a highland plateau. The associated nasal breathing targeted oxygen supply system (NBTOSS) was designed and optimized by numerical simulation and full-scale experiments. Blood oxygen saturation (SaO2) and pulse rate (PR) monitoring experiments were conducted on subjects exposed to hypoxia at a high altitude (Lhasa, 3646.31 m) with or without assistance from the novel oxygen system and on a lowland plain (Xi'an, 397.5 m) as a comparison. The size of the affected area, concentration target value, and oxygen consumption were used as evaluation indices. Experiments have demonstrated the feasibility of creating an oxygen-enriched microenvironment in breathing area during sleep. The results of the testing showed that the oxygen supply area was uniformly covered and that the degree of hypoxia in subjects was effectively alleviated, with average SaO2 increasing to 95% ± 1%. Maintaining oxygen levels during sleep for temporary residents of high altitudes with less oxygen consumption and minimal oxygen supply costs is discussed to provide a healthy and comfortable oxygen-enriched environment.
|
|
| 3. |
- Chen, Jun, et al.
(författare)
-
Collaborative validation of GlobeLand30 : Methodology and practices
- 2021
-
Ingår i: Geo-spatial Information Science. - : TAYLOR & FRANCIS LTD. - 1009-5020 .- 1993-5153. ; 24:1, s. 134-144
-
Tidskriftsartikel (refereegranskat)abstract
- 30-m Global Land Cover (GLC) data products permit the detection of land cover changes at the scale of most human land activities, and are therefore used as fundamental information for sustainable development, environmental change studies, and many other societal benefit areas. In the past few years, increasing efforts have been devoted to the accuracy assessment of GlobeLand30 and other finer-resolution GLC data products. However, most of them were conducted either within a limited percentage of map sheets selected from a global scale or in some individual countries (areas), and there are still many areas where the uncertainty of 30-m resolution GLC data products remains to be validated and documented. In order to promote a comprehensive and collaborative validation of 30-m GLC data products, the GEO Global Land Cover Community Activity had organized a project from 2015 to 2017, to examine and explore its major problems, including the lack of international agreed validation guidelines and on-line tools for facilitating collaborative validation activities. With the joint effort of experts and users from 30 GEO member countries or participating organizations, a technical specification for 30-m GLC validation was developed based on the findings and experiences. An on-line validation tool, GLCVal, was developed by integrating land cover validation procedures with the service computing technologies. About 20 countries (regions) have completed the accuracy assessment of GlobeLand30 for their territories with the guidance of the technical specification and the support of GLCVal.
|
|
| 4. |
- Huang, Dan, et al.
(författare)
-
Applications of spouted bed technology in the drying of food products
- 2023
-
Ingår i: LWT. - 0023-6438. ; 182
-
Forskningsöversikt (refereegranskat)abstract
- This study reviews the recent research progress of spouted bed technology in applications of food products. The pure spouted bed drying, spouted bed drying with inert particles and drying carriers and the combination of spouted bed with other drying methods are discussed in detail. Results showed that the effect of temperature on drying characteristics and quality was the most investigated and different results of the drying quality were observed. SBD is a potential drying method for food products, however, there are still some difficulties that limit its industrial application. Thus, modified spouted beds that facilitates scale-up are needed, such as rectangular spouted bed, draft spouted bed and mechanically spouted bed. Spouted bed drying with inert particles is a flexible alternative drying technology compared to the spray drying. The effect of using inert particles in spouted bed is good, however, strong friction and long-term use of inert materials will lead to fracture and fragmentation. Thus, drying carriers are often added. The drying performance and quality of spouted bed with other drying methods is generally better than that of pure spouted bed drying as it combines the advantages of different drying methods.
|
|
| 5. |
- Huang, Dan, et al.
(författare)
-
Drying Kinetics and Energy Consumption of Astragalus Membranaceus Under Infrared Drying
- 2024
-
Ingår i: Journal of Thermal Science and Engineering Applications. - 1948-5085. ; 16:7
-
Tidskriftsartikel (refereegranskat)abstract
- The Astragalus membranaceus (AM) slices was dried using three infrared drying techniques, including near-infrared drying (NIR), mid-infrared drying (MIR), and far-infrared drying (FIR). Studies and discussions about the impacts of infrared temperature, power, slice thickness, and wavelength on the drying properties, energy consumption, and associated performance were conducted. Results showed that the drying rate increased with increasing infrared temperature and wavelength, and with decreasing slice thickness, whereas the drying process was not significantly influenced by the infrared power. The drying efficiency of FIR was superior to that of NIR, and with the increase in temperature, this improvement became more obvious. FIR drying was the fastest with the least energy consumption among the three drying methods. Rehydration ratio and color change of AM slices were proportional to infrared temperature and wavelength, but inversely proportional to slice thickness. The effective moisture diffusion coefficients of AM slices under NIR and FIR drying ranged from 0.49244 × 10-9 to 1.16352 × 10-9 m2/s and 1.00432 × 10-9 to 2.51135 × 10-9 m2/s, respectively.
|
|
| 6. |
- Liu, Anbu, et al.
(författare)
-
DDR1/2 enhance KIT activation and imatinib resistance of primary and secondary KIT mutants in gastrointestinal stromal tumors
- 2024
-
Ingår i: Molecular Carcinogenesis. - 0899-1987. ; 63:1, s. 75-93
-
Tidskriftsartikel (refereegranskat)abstract
- Gastrointestinal stromal tumors (GISTs) are predominantly initiated by KIT mutations. In this study, we observed that discoidin domain receptors 1 and 2 (DDR1 and DDR2) exhibited high expression in GISTs, were associated with KIT, and enhanced the activation of both wild-type KIT and primary KIT mutants. Inhibition of DDR1/2 led to a reduction in the activation of KIT and its downstream signaling molecules, ultimately impairing GIST cell survival and proliferation in vitro. Consequently, treatment of mice carrying germline KIT/V558A mutation with DDR1/2 inhibitor significantly impeded tumor growth, and the combined use of DDR1/2 inhibitor and imatinib, the first-line targeted therapeutic agent for GISTs, markedly enhanced tumor growth suppression. In addition, DDR1/2 inhibition resulted in decreased KIT expression, while KIT inhibition led to upregulation of DDR1/2 expression in GISTs. The presence of DDR1/2 also decreased the sensitivity of wild-type KIT or primary KIT mutants to imatinib, indicating a possible role for DDR1/2 in promoting GIST survival during KIT-targeted therapy. The development of drug-resistant secondary KIT mutations is a primary factor contributing to GIST recurrence following targeted therapy. Similar to primary KIT mutants, DDR1/2 can associate with and enhance the activation of secondary KIT mutants, further diminishing their sensitivity to imatinib. In summary, our data demonstrate that DDR1/2 contribute to KIT activation in GISTs and strengthen resistance to imatinib for both primary and secondary KIT mutants, providing a rationale for further exploration of DDR1/2 targeting in GIST treatment.
|
|
| 7. |
- Sun, Jingwu, et al.
(författare)
-
From electronic structure to combustion model application for acrolein chemistry Part Ⅱ : Acrolein + HȮ2 reactions and the development of acrolein sub-mechanism
- 2023
-
Ingår i: Combustion and Flame. - : Elsevier BV. - 0010-2180. ; 251
-
Tidskriftsartikel (refereegranskat)abstract
- Acrolein, as one of the most hazardous aldehydes, can be formed among the carbonyls from the combustion of bio-fuels or mixtures of bio- and conventional fuels. Moreover, acrolein is also an important combustion intermediate in the oxidations of higher unsaturated hydrocarbons. A deep understanding of acrolein combustion chemistry will be useful for the kinetic modeling of higher hydrocarbons and ultimately practical fuels, with the acrolein reaction subset expected to be an important building block. In this work, the reaction system of acrolein + HȮ2, which is critical in controlling the reactivity of acrolein at low to intermediate temperatures (800–1000 K), was theoretically studied. Subsequently, by lumping the data calculated in this study, its companion work on the reaction system of acrolein + Ḣ in Part Ⅰ, other related high precision theoretical calculation studies and the relevant data estimated in the trusted models, a detailed chemical kinetic sub-mechanism has been developed to describe the directly related combustion reactions of acrolein. The kinetic, thermodynamic and transport data in the acrolein sub-mechanism were used to update and develop the base mechanism, AramcoMech 3.0. The updated model was then validated against ignition delay times (IDT) of acrolein measured in shock tube by Chatelain et al. [Fuel 135 (2014) 498], burning velocity of acrolein measured by Gibbs and Calcote [J. Chem. Engineer. Data 4 (1959) 226], species profiles from jet-stirred reactor for propene oxidation presented by Burke et al. [Combustion and Flame 161 (2014) 2765].
|
|
| 8. |
- Tang, Hu, et al.
(författare)
-
Boron-Rich Molybdenum Boride with Unusual Short-Range Vacancy Ordering, Anisotropic Hardness, and Superconductivity
- 2020
-
Ingår i: Chemistry of Materials. - : AMER CHEMICAL SOC. - 0897-4756 .- 1520-5002. ; 32:1, s. 459-467
-
Tidskriftsartikel (refereegranskat)abstract
- Determination of the structures of materials involving more light elements such as boron-rich compounds is challenging and technically important in understanding their varied compositions and superior functionalities. Here we resolve the long-standing uncertainties in structure and composition about the highest boride (termed MoB4, Mo1-xB3, or MoB3) through the rapid formation of large sized boron-rich molybdenum boride under pressure. Using high-quality single-crystal X-ray diffraction analysis and aberration-corrected scanning transmission electron microscopy, we reveal that boron-rich molybdenum boride with a composition of Mo0.757B3 exhibits P6(3)/mmc symmetry with a partial occupancy of 0.514 in 211 Mo sites (Mol), and direct observations reveal the short-range ordering of cation vacancies in (010) crystal planes. Large anisotropic Young's moduli and Vickers hardness are seen for Mo0.757B3, which may be attributed by its two-dimensional boron distributions. Mo0.757B3 is also found to be superconducting with a transition temperature (T-c) of 2.4 K, which was confirmed by measurements of resistivity and magnetic susceptibility. Theoretical calculations suggest that the partial occupancy of Mo atoms plays a crucial role in the emergence of superconductivity.
|
|
| 9. |
- Wang, Xin-Xin, et al.
(författare)
-
What is the Role of Nb on Preferential Hydriding of Double-Phased Uranium, Stabilizing gamma-U, or Avoiding Hydrogen Aggregation?
- 2021
-
Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 125:17, s. 9364-9370
-
Tidskriftsartikel (refereegranskat)abstract
- Uranium as the heaviest naturally occurring element plays important roles in nuclear industries. Hydrogen-caused corrosions and irradiation-caused structural damages are two critical degradations that threaten the safe storage and practical applications of uranium. Through alloying with transition metals like Nb, the gamma-phase of U can be stabilized at room temperature, which shows better performance against hydrogen-caused corrosions than the ground-state alpha-U. The underlying mechanisms have not been fully understood yet. To explain the preferential hydriding phenomenon observed on a specially fabricated double-phase U-2.5 wt % Nb alloy, we perform multiscale ab initio calculations and kinetic Monte Carlo (KMC) simulations. We find that because of different diffusion mechanisms, intrinsic alpha-U and gamma-U already show different hydrogen accumulation behaviors. The existence of random Nb atoms further inhibits hydrogen accumulation in gamma-U. Our work declares its contribution by pointing out the important role of crystal lattice architectures on hydrogen accumulations in metals.
|
|
| 10. |
- Xian, Guang, et al.
(författare)
-
Study on the growth and wear behavior of the TiAlN-based composite coating deposited on TiCN-based cermets with different binder phase
- 2020
-
Ingår i: Wear. - : ELSEVIER SCIENCE SA. - 0043-1648 .- 1873-2577. ; 460
-
Tidskriftsartikel (refereegranskat)abstract
- The TiAlN-based composite coating was coated on TiCN-based cermets with different binder phase by arc ion plating. The effects of binder phase within cermets substrates on the microstructure, mechanical properties and wear behavior of the composite coating were investigated. The results show that the growth of the composite coating is affected by binder phase in the cermets substrates. With a higher content of Co binder in the cermets, the composite coating grows faster. Ni as a binder phase in the cermets is more favorable for the growth rate of the surface coating. The grain size of the coating on 10%Co-TiCN-based cermets is the finest and the hardness is the highest. The variation of binder phase in the cermets substrates leads to different adhesion strength of the composite coating. The adhesion strength of the composite coating on the 10%Co-TiCN-based cermets is the highest, which is because of the smallest differences in hardness and thermal expansion coefficient for this coating/substrate couple. The wear behavior of composite coating on 10%Co-TiCN-based substrate is dominated by abrasive wear while that on the other cermets with Ni binder or higher content of Co binder is a mixture form of diffusion wear, oxidation wear and abrasive wear.
|
|
