| 1. |
- Ablikim, M., et al.
(author)
-
Measurements of (XcJ)-> K+K-K+K- decays
- 2006
-
In: Physics Letters B. - : Elsevier BV. - 0370-2693 .- 1873-2445. ; 642:3, s. 197-202
-
Journal article (peer-reviewed)abstract
- Using 14M psi(2S) events taken with the BESII detector, chi(cJ) -> 2(K+K-) decays are studied. For the four-kaon final state, the branching fractions are B(chi(c0,1,2) ->.2(K+K-)) = (3.48 +/- 0.23 +/- 0.47) x 10(-3), (0.70 +/- 0.13 +/- 0.10) x 10(-3), and (2.17 +/- 0.20 +/- 0.31) x 10(-3). For the phi K+K- final state, the branching fractions, which are measured for the first time, are B(chi(c0,1,2) -> phi K+K-) = (1.03 +/- 0.22 +/- 0.15) x 10(-3), (0.46 +/- 0.16 +/- 0.06) x 10(-3), and (1.67 +/- 0.26 +/- 0.24) x 10(-4). For the phi phi final state, B(chi(c0,2) -> phi phi) = (0.94 +/- 0.21 +/- 0.13) x 10(-3) and (1.70 +/- 0.30 +/- 0.25) x 10(-3).
|
|
| 2. |
- Meyer, H., et al.
(author)
-
Overview of physics results from MAST
- 2009
-
In: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 49:10, s. 104017-
-
Journal article (peer-reviewed)abstract
- Several improvements to the MAST plant and diagnostics have facilitated new studies advancing the physics basis for ITER and DEMO, as well as for future spherical tokamaks (STs). Using the increased heating capabilities P-NBI <= 3.8 MW H-mode at I-P = 1.2 MA was accessed showing that the energy confinement on MAST scales more weakly with I-P and more strongly with B-t than in the ITER IPB98(y, 2) scaling. Measurements of the fuel retention of shallow pellets extrapolate to an ITER particle throughput of 70% of its original designed total throughput capacity. The anomalous momentum diffusion, chi(phi), is linked to the ion diffusion, chi(i), with a Prandtl number close to P-phi approximate to chi(phi)/chi(i) approximate to 1, although chi(i) approaches neoclassical values. New high spatial resolution measurements of the edge radial electric field, E-r, show that the position of steepest gradients in electron pressure and E-r (i.e. shearing rate) are coincident, but their magnitudes are not linked. The T-e pedestal width on MAST scales with root beta(ped)(pol) rather than rho(pol). The edge localized mode (ELM) frequency for type-IV ELMs, new in MAST, was almost doubled using n = 2 resonant magnetic perturbations from a set of four external coils (n = 1, 2). A new internal 12 coil set (n <= 3) has been commissioned. The filaments in the inter-ELM and L-mode phase are different from ELM filaments, and the characteristics in L-mode agree well with turbulence calculations. A variety of fast particle driven instabilities were studied from 10 kHz saturated fishbone like activity up to 3.8 MHz compressional Alfven eigenmodes. Fast particle instabilities also affect the off-axis NBI current drive, leading to fast ion diffusion of the order of 0.5 m(2) s(-1) and a reduction in the driven current fraction from 40% to 30%. EBW current drive start-up is demonstrated for the first time in a ST generating plasma currents up to 55 kA. Many of these studies contributed to the physics basis of a planned upgrade to MAST.
|
|
| 3. |
- Abat, E., et al.
(author)
-
Study of the response of the ATLAS central calorimeter to pions of energies from 3 to 9 GeV
- 2009
-
In: Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment. - : Elsevier BV. - 0167-5087 .- 0168-9002 .- 1872-9576. ; 607:2, s. 372-386
-
Journal article (peer-reviewed)abstract
- A fully instrumented slice of the ATLAS central detector was exposed to test beams from the SPS (Super Proton Synchrotron) at CERN in 2004. in this paper, the response of the central calorimeters to pions with energies in the range between 3 and 9 GeV is presented. The linearity and the resolution of the combined calorimetry (electromagnetic and hadronic calorimeters) was measured and compared to the prediction of a detector simulation program using the toolkit Geant 4. (C) 2009 Elsevier B.V. All rights reserved.
|
|
| 4. |
- Abate, E., et al.
(author)
-
Combined performance tests before installation of the ATLAS Semiconductor and Transition Radiation Tracking Detectors
- 2008
-
In: Journal of Instrumentation. - 1748-0221. ; 3
-
Journal article (peer-reviewed)abstract
- The ATLAS (A Toroidal LHC ApparatuS) Inner Detector provides charged particle tracking in the centre of the ATLAS experiment at the Large Hadron Collider (LHC). The Inner Detector consists of three subdetectors: the Pixel Detector, the Semiconductor Tracker (SCT), and the Transition Radiation Tracker (TRT). This paper summarizes the tests that were carried out at the final stage of SCT+TRT integration prior to their installation in ATLAS. The combined operation and performance of the SCT and TRT barrel and endcap detectors was investigated through a series of noise tests, and by recording the tracks of cosmic rays. This was a crucial test of hardware and software of the combined tracker detector systems. The results of noise and cross-talk tests on the SCT and TRT in their final assembled configuration, using final readout and supply hardware and software, are reported. The reconstruction and analysis of the recorded cosmic tracks allowed testing of the offline analysis chain and verification of basic tracker performance parameters, such as efficiency and spatial resolution, in combined operation before installation.
|
|
| 5. |
- Alvarez Fernandez, Marcia, et al.
(author)
-
Crystal structure of human cystatin D, a cysteine peptidase inhibitor with restricted inhibition profile.
- 2005
-
In: Journal of Biological Chemistry. - 1083-351X. ; 280:18, s. 18221-18228
-
Journal article (peer-reviewed)abstract
- Cystatins are natural inhibitors of papain-like (family C1) and legumain-related (family C13) cysteine peptidases. Cystatin D is a type 2 cystatin, a secreted inhibitor found in human saliva and tear fluid. Compared to its homologues, cystatin D presents an unusual inhibition profile with a preferential inhibition cathepsin S > cathepsin H > cathepsin L, and no inhibition of cathepsin B or pig legumain. To elucidate the structural reasons for this specificity, we have crystallized recombinant human Arg26-cystatin D and solved its structures at room temperature and at cryo conditions to 2.5 and 1.8 Å resolution, respectively. Human cystatin D presents the typical cystatin fold, with a five-stranded anti-parallel -sheet wrapped around a five-turn -helix. The structures reveal differences in the peptidase-interacting regions when compared to other cystatins, providing plausible explanations to the restricted inhibitory specificity of cystatin D for some papain-like peptidases, and its lack of reactivity towards legumain-related enzymes. This is the final, accepted and revised manuscript of this article. Use alternative location to go to the published article. Requires subscription.
|
|
| 6. |
- Brandberg, Jenny, et al.
(author)
-
Water capacity model of Al2O3-CaO-MgO-SiO2 quaternary slag system
- 2007
-
In: Steel research. - : Wiley. - 0177-4832 .- 1611-3683. ; 78:6, s. 460-464
-
Journal article (peer-reviewed)abstract
- The focus of the present work was to develop a water capacity model for the quaternary slag system Al2O3-CaO-MgO-SiO2. In the model, a silicate melt was considered to consist of two ion groupings, viz. cation grouping and oxygen ion. The water capacity of a melt is supposed to depend on the interactions between the cations in the presence of oxygen ions. These interactions were determined on the basis of the experimentally measured water solubility data. Only binary interactions were employed in the model. For the system CaO-SiO2, disagreement in the literature data was found. Since the interaction between Ca2+ and Si4+ would play an important role, experiments were carried out to determine the water capacities of some CaO-SiO2 slags. For this purpose a thermogravimetric method was employed. Iso-lines of water capacities at constant MgO contents were predicted by the model and compared with the experimental data from literature. The model calculations agreed well with the experimental results.
|
|
| 7. |
- Duan, Ming-Rui, et al.
(author)
-
DNA binding mechanism revealed by high resolution crystal structure of Arabidopsis thaliana WRKY1 protein
- 2007
-
In: Nucleic Acids Research. - : Oxford University Press (OUP). - 1362-4962 .- 0305-1048. ; 35:4, s. 54-1145
-
Journal article (peer-reviewed)abstract
- WRKY proteins, defined by the conserved WRKYGQK sequence, are comprised of a large superfamily of transcription factors identified specifically from the plant kingdom. This superfamily plays important roles in plant disease resistance, abiotic stress, senescence as well as in some developmental processes. In this study, the Arabidopsis WRKY1 was shown to be involved in the salicylic acid signaling pathway and partially dependent on NPR1; a C-terminal domain of WRKY1, AtWRKY1-C, was constructed for structural studies. Previous investigations showed that DNA binding of the WRKY proteins was localized at the WRKY domains and these domains may define novel zinc-binding motifs. The crystal structure of the AtWRKY1-C determined at 1.6 A resolution has revealed that this domain is composed of a globular structure with five beta strands, forming an antiparallel beta-sheet. A novel zinc-binding site is situated at one end of the beta-sheet, between strands beta4 and beta5. Based on this high-resolution crystal structure and site-directed mutagenesis, we have defined and confirmed that the DNA-binding residues of AtWRKY1-C are located at beta2 and beta3 strands. These results provided us with structural information to understand the mechanism of transcriptional control and signal transduction events of the WRKY proteins.
|
|
| 8. |
- Fu, Jinrong, et al.
(author)
-
Anti-ischemia/reperfusion of C1 inhibitor in myocardial cell injury via regulation of local myocardial C3 activity.
- 2006
-
In: Biochemical and Biophysical Research Communications - BBRC. - : Elsevier BV. - 0006-291X .- 1090-2104. ; 350:1, s. 162-8
-
Journal article (peer-reviewed)abstract
- C3 is common to all pathways of complement activation augmenting ischemia/reperfusion (I/R)-induced myocardial injury and cardiac dysfunction. Complement inhibition with the complement regulatory protein, C1 inhibitor (C1INH), obviously exerts cardioprotective effects. Here, we examine whether C1INH regulates C3 activity in the ischemic myocardial tissue. C1INH markedly suppressed C3 mRNA expression and protein synthesis in both a model of I/R-induced rat acute myocardial infarction (AMI) and the cultured rat H9c2 heart myocytes. At least, this regulation was at the transcriptional level in response to oxygen tension. In vitro, C3 deposition on, and binding to, the surface of rat myocardial cells were significantly blocked by C1INH treatment. C1INH could inhibit classical complement-mediated cell lysis via suppressing the biological activity of C3. Therefore, C1INH, in addition to inhibition of the systemic complement activation, prevents myocardial cell injury via a direct inhibitory role in the local myocardial C3 activity.
|
|
| 9. |
- Kang, Young Jo, et al.
(author)
-
Mechanism Study of inclusion removal around open-eye in ladle treatment
- 2007
-
In: Ironmaking & steelmaking. - 0301-9233 .- 1743-2812. ; 34:3, s. 253-261
-
Journal article (peer-reviewed)abstract
- In the present study, the inclusion removal mechanism by rising bubbles around the open eye in a gas stirred ladle was investigated using a cold model. Water and silicone oils were employed to simulate liquid metal and slag respectively, Both fine silicone oil droplets and charcoal particles were used to simulate inclusions. Around the open eye, the oil layer exhibited a sphere bed structure when a critical gas flowrate was reached. The sphere bed was composed of many oil droplets, each of which was coated with a thin water film. The injected inclusions mostly followed the stream of water flow and were brought up to the open eye by the gas-water plume. A fraction of the inclusions were captured by the sphere bed when passing through the openings between the oil droplets, while the rest of the inclusions came back to the water bath and joined the stream of the flow again. The sphere bed was found to function as a filter to the tiny particles or oil droplets. On the basis of this mechanism, a preliminary comparison of the contribution of inclusion removal by metal-gas plume in the open eye region with the contribution of buoyancy was made.
|
|
| 10. |
- Litaudon, X., et al.
(author)
-
Development of steady-state scenarios compatible with ITER-like wall conditions
- 2007
-
In: Plasma Physics and Controlled Fusion. - 0741-3335 .- 1361-6587. ; 49:12B, s. B529-B550
-
Journal article (peer-reviewed)abstract
- A key issue for steady-state tokamak operation is to determine the edge conditions that are compatible both with good core confinement and with the power handling and plasma exhaust capabilities of the plasma facing components (PFCs) and divertor systems. A quantitative response to this open question will provide a robust scientific basis for reliable extrapolation of present regimes to an ITER compatible steady-state scenario. In this context, the JET programme addressing steady-state operation is focused on the development of non-inductive, high confinement plasmas with the constraints imposed by the PFCs. A new beryllium main chamber wall and tungsten divertor together with an upgrade of the heating/fuelling capability are currently in preparation at JET. Operation at higher power with this ITER-like wall will impose new constraints on non-inductive scenarios. Recent experiments have focused on the preparation for this new phase of JET operation. In this paper, progress in the development of advanced tokamak (AT) scenarios at JET is reviewed keeping this long-term objective in mind. The approach has consisted of addressing various critical issues separately during the 2006-2007 campaigns with a view to full scenario integration when the JET upgrades are complete. Regimes with internal transport barriers (ITBs) have been developed at q(95) similar to 5 and high triangularity, 3 (relevant to the ITER steady-state demonstration) by applying more than 30 MW of additional heating power reaching beta(N) similar to 2 at B(o) similar to 3.1 T. Operating at higher 6 has allowed the edge pedestal and core densities to be increased pushing the ion temperature closer to that of the electrons. Although not yet fully integrated into a performance enhancing ITB scenario, Neon seeding has been successfully explored to increase the radiated power fraction (up to 60%), providing significant reduction of target tile power fluxes (and hence temperatures) and mitigation of edge localized mode (ELM) activity. At reduced toroidal magnetic field strength, high beta(N) regimes have been achieved and q-profile optimization investigated for use in steady-state scenarios. Values of beta(N) above the 'no-wall magnetohydrodynamic limit' (beta(N) similar to 3.0) have been sustained for a resistive current diffusion time in high-delta configurations (at 1.2 MA/1.8 T). In this scenario, ELM activity has been mitigated by applying magnetic perturbations using error field correction coils to provide ergodization of the magnetic field at the plasma edge. In a highly shaped, quasi-double null X-point configuration, ITBs have been generated on the ion heat transport channel and combined with 'grassy' ELMs with similar to 30 MW of applied heating power (at 1.2 MA/2.7 T, q(95) similar to 7). Advanced algorithms and system identification procedures have been developed with a view to developing simultaneously temperature and q-profile control in real-time. These techniques have so far been applied to the control of the q-profile evolution in JET AT scenarios.
|
|
