| 1. |
- Lindh, Anders, et al.
(författare)
-
A model for granite evolution based on non-equilibrium magma separation : evidence from the Gharib and Qattar fluorite-bearing granites, Eastern Desert, Egypt
- 2019
-
Ingår i: International Journal of Earth Sciences. - : Springer Science and Business Media LLC. - 1437-3254 .- 1437-3262. ; 108:4, s. 1201-1232
-
Tidskriftsartikel (refereegranskat)abstract
- We present 77 new granite whole-rock analyses from the Qattar and Gharib areas, Eastern Desert, Egypt. Both areas include a “normal” granite and either a hypersolvus (Gharib) or an almost plagioclase-free granite (Qattar) enriched in fluorite. According to earlier results, F influences element distribution in granitic melts forming complexes with specific elements as Nb, Ta, Ga, Hf, Th, Zn, Sn, whereas F excludes Ba and Sr. We use principal component analyses to split the granite into chemical groups allowing an unbiased study of the inter-group element distribution. This adds the heavy REEs and Y to the earlier lists of elements with an affinity for F. The light REEs show a decreasing affinity with decreasing atomic mass; fluorine separates Sm from Nd, whereas Zr follows La. Opposite to some, but in accordance with other earlier results, the ratio Nb/Ta is higher in the fluorite-enriched than in the other granite. Weak tetrad effects are present. Zircon in the hypersolvus granite is high in common lead. We suggest F to be instrumental for separating Pb 2+ from Pb 4+ . Two hypotheses may explain the occurrence of the two contrasting granites: they have either different sources, or they are co-magmatic, but the magma was split into two discrete types. We apply the second hypothesis as our working hypothesis. The liquidus has a gentler slope with pressure than the diapir requiring crystallisation to be most important in the lower part of the magma chamber. Our hypothesis suggests that globules of magma, enriched in volatile components, form during crystallisation due to slow diffusion rates in the crystallizing magma. Elements accompanying F are distributed into this magma batch, which has a lowered density and viscosity than the rest of the magma due to its increased contents of volatile components. A mushroom-formed diapir rises, forming the hypersolvus (or almost plagioclase-free) granite. Due to an edge effect, it is concentrated close to the wall of the magma chamber. The size and form of the outcropping granite depend on the intersection of the diapir with the erosion surface. Fluorine only makes it possible to follow the process. The model may be generalised to explain the diversification of non-F enriched granite, since the buoyancy of a magma batch several thousand m 3 in size has a much larger impact on the system than the small negative buoyancy of crystals or small crystal aggregates. A-type granite classified merely from its trace element content may form from separated F-enriched magma batches. This may be the reason for their high frequency in the Eastern Desert.
|
|
| 2. |
- Abu El-Rus, Mohamed A., et al.
(författare)
-
Mueilha rare metals granite, Eastern Desert of Egypt : An example of a magmatic-hydrothermal system in the Arabian-Nubian Shield
- 2017
-
Ingår i: Lithos. - : Elsevier BV. - 0024-4937. ; 294-295, s. 362-382
-
Tidskriftsartikel (refereegranskat)abstract
- The Mueilha granite pluton is one of the rare-metals bearing peraluminous granitic plutons in the Arabian-Nubian Shield. It represents the apical part of a highly evolved magma chamber emplaced at a shallow level subsequent to the post Pan-African orogeny. The pluton can be seen as a highly leucocratic medium-grained albite/oligoclase framework infilled with quartz, K-feldspar and muscovite that are variably overgrown by K-feldspar, muscovite, quartz and topaz megacrysts. The increasing number and size of the K-feldspar megacrysts at the expense of the whitened albite/oligoclase framework imparts variably red color to the Mueilha granite. Contacts between the milky white and red granites are usually gradational, but may be locally sharp or may form narrow transition zones resulting from abrupt variations in texture and lithology. Textural relations indicate an initial stage of hydrothermal albitization of magmatic plagioclase and crystallization of topaz megacrysts resulting from infiltration of Na-rich fluorine bearing fluids. A subsequent stage of metasomatic enrichment is characterized by extensive growth of large K-feldspar, quartz and muscovite megacrysts at the expense of the albite/oligoclase crystals as a result of infiltration of K-Si rich hydrous fluids. Post-magmatic infiltration of hydrous fluids along the fault planes is shown by the intense replacement of alkali feldspar megacrysts by quartz, development of myrmekitic intergrowth pockets along the K-feldspar megacrysts and sealing of the micro-fractures by cryptocrystalline mixtures of clay minerals, iron oxides, sericite and chlorite. Compositionally, the red granitic rocks have higher SiO2, Fe2O3total, K2O/Na2O, Σ REE, Y, Th, U, Zr and Zn and lower Al2O3, Ga, Ta, Nb and Mo compared to the milky white granites. LILE and Sn do not show clear variation trends throughout the Mueilha granite pluton, suggesting their immobility during hydrothermal alteration. Microthermometric measurements indicate that the interactions with the hydrothermal fluids started at a minimum temperature > 400°C, most likely during the late-stage crystallization of the Mueilha granite and continued after their complete solidification (i.e. subsolidus conditions) at a temperature as low as 120 °C. The high fertility of Mueilha granite is most plausibly the result of partial melting within the undepleted juvenile crust of the Arabian–Nubian Shield that has formed during the Pan-African orogeny.
|
|
| 3. |
- Ahlen, Anders, et al.
(författare)
-
Toward Wireless Control in Industrial Process Automation : A Case Study at a Paper Mill
- 2019
-
Ingår i: IEEE Control Systems. - : Institute of Electrical and Electronics Engineers (IEEE). - 1066-033X .- 1941-000X. ; 39:5, s. 36-57
-
Tidskriftsartikel (refereegranskat)abstract
- Wireless sensors and networks are used only occasionally in current control loops in the process industry. With rapid developments in embedded and highperformance computing, wireless communication, and cloud technology, drastic changes in the architecture and operation of industrial automation systems seem more likely than ever. These changes are driven by ever-growing demands on production quality and flexibility. However, as discussed in "Summary," there are several research obstacles to overcome. The radio communication environment in the process industry is often troublesome, as the environment is frequently cluttered with large metal objects, moving machines and vehicles, and processes emitting radio disturbances [1], [2]. The successful deployment of a wireless control system in such an environment requires careful design of communication links and network protocols as well as robust and reconfigurable control algorithms.
|
|
| 4. |
- Ahlén, Anders, et al.
(författare)
-
Towards Wireless Control in Industrial Process Automation : A Case Study at a Paper Mill
- 2019
-
Ingår i: IEEE CONTROL SYSTEMS MAGAZINE. - : IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. - 1066-033X .- 1941-000X. ; 39:5, s. 36-57
-
Tidskriftsartikel (refereegranskat)abstract
- Wireless sensors and networks are used only occasionally in current control loops in the process industry. With rapid developments in embedded and highperformance computing, wireless communication, and cloud technology, drastic changes in the architecture and operation of industrial automation systems seem more likely than ever. These changes are driven by ever-growing demands on production quality and flexibility. However, as discussed in "Summary," there are several research obstacles to overcome. The radio communication environment in the process industry is often troublesome, as the environment is frequently cluttered with large metal objects, moving machines and vehicles, and processes emitting radio disturbances [1], [2]. The successful deployment of a wireless control system in such an environment requires careful design of communication links and network protocols as well as robust and reconfigurable control algorithms.
|
|
| 5. |
- Ali, Neserin, et al.
(författare)
-
Analysis of nanoparticle-protein coronas formed in vitro between nanosized welding particles and nasal lavage proteins.
- 2016
-
Ingår i: Nanotoxicology. - : Taylor & Francis. - 1743-5390 .- 1743-5404. ; 10:2, s. 226-234
-
Tidskriftsartikel (refereegranskat)abstract
- Welding fumes include agglomerated particles built up of primary nanoparticles. Particles inhaled through the nose will to some extent be deposited in the protein-rich nasal mucosa, and a protein corona will be formed around the particles. The aim was to identify the protein corona formed between nasal lavage proteins and four types of particles with different parameters. Two of the particles were formed and collected during welding and two were manufactured iron oxides. When nasal lavage proteins were added to the particles, differences were observed in the sizes of the aggregates that were formed. Measurements showed that the amount of protein bound to particles correlated with the relative size increase of the aggregates, suggesting that the surface area was associated with the binding capacity. However, differences in aggregate sizes were detected when nasal proteins were added to UFWF and Fe2O3 particles (having similar agglomerated size) suggesting that yet parameters other than size determine the binding. Relative quantitative mass spectrometric and gel-based analyses showed differences in the protein content of the coronas. High-affinity proteins were further assessed for network interactions. Additional experiments showed that the inhibitory function of secretory leukocyte peptidase inhibitor, a highly abundant nasal protein, was influenced by particle binding suggesting that an understanding of protein function following particle binding is necessary to properly evaluate pathophysiological events. Our results underscore the importance of including particles collected from real working environments when studying the toxic effects of particles because these effects might be mediated by the protein corona.
|
|
| 6. |
- Ali, Neserin, et al.
(författare)
-
Comprehensive proteome analysis of nasal lavage samples after controlled exposure to welding nanoparticles shows an induced acute phase and a nuclear receptor, LXR/RXR, activation that influence the status of the extracellular matrix
- 2018
-
Ingår i: Clinical Proteomics. - : Springer Science and Business Media LLC. - 1542-6416 .- 1559-0275. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Epidemiological studies have shown that many welders experience respiratory symptoms. During the welding process a large number of airborne nanosized particles are generated, which might be inhaled and deposited in the respiratory tract. Knowledge of the underlying mechanisms behind observed symptoms is still partly lacking, although inflammation is suggested to play a central role. The aim of this study was to investigate the effects of welding fume particle exposure on the proteome expression level in welders suffering from respiratory symptoms, and changes in protein mediators in nasal lavage samples were analyzed. Such mediators will be helpful to clarify the pathomechanisms behind welding fume particle-induced effects. Methods: In an exposure chamber, 11 welders with work-related symptoms in the lower airways during the last month were exposed to mild-steel welding fume particles (1 mg/m3) and to filtered air, respectively, in a double-blind manner. Nasal lavage samples were collected before, immediately after, and the day after exposure. The proteins in the nasal lavage were analyzed with two different mass spectrometry approaches, label-free discovery shotgun LC-MS/MS and a targeted selected reaction monitoring LC-MS/MS analyzing 130 proteins and four in vivo peptide degradation products. Results: The analysis revealed 30 significantly changed proteins that were associated with two main pathways; activation of acute phase response signaling and activation of LXR/RXR, which is a nuclear receptor family involved in lipid signaling. Connective tissue proteins and proteins controlling the degradation of such tissues, including two different matrix metalloprotease proteins, MMP8 and MMP9, were among the significantly changed enzymes and were identified as important key players in the pathways. Conclusion: Exposure to mild-steel welding fume particles causes measurable changes on the proteome level in nasal lavage matrix in exposed welders, although no clinical symptoms were manifested. The results suggested that the exposure causes an immediate effect on the proteome level involving acute phase proteins and mediators regulating lipid signaling. Proteases involved in maintaining the balance between the formation and degradation of extracellular matrix proteins are important key proteins in the induced effects.
|
|
| 7. |
- Alneberg, Johannes, et al.
(författare)
-
Genomes from uncultivated prokaryotes : a comparison of metagenome-assembled and single-amplified genomes
- 2018
-
Ingår i: Microbiome. - : BioMed Central. - 2049-2618. ; 6
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Prokaryotes dominate the biosphere and regulate biogeochemical processes essential to all life. Yet, our knowledge about their biology is for the most part limited to the minority that has been successfully cultured. Molecular techniques now allow for obtaining genome sequences of uncultivated prokaryotic taxa, facilitating in-depth analyses that may ultimately improve our understanding of these key organisms. Results: We compared results from two culture-independent strategies for recovering bacterial genomes: single-amplified genomes and metagenome-assembled genomes. Single-amplified genomes were obtained from samples collected at an offshore station in the Baltic Sea Proper and compared to previously obtained metagenome-assembled genomes from a time series at the same station. Among 16 single-amplified genomes analyzed, seven were found to match metagenome-assembled genomes, affiliated with a diverse set of taxa. Notably, genome pairs between the two approaches were nearly identical (average 99.51% sequence identity; range 98.77-99.84%) across overlapping regions (30-80% of each genome). Within matching pairs, the single-amplified genomes were consistently smaller and less complete, whereas the genetic functional profiles were maintained. For the metagenome-assembled genomes, only on average 3.6% of the bases were estimated to be missing from the genomes due to wrongly binned contigs. Conclusions: The strong agreement between the single-amplified and metagenome-assembled genomes emphasizes that both methods generate accurate genome information from uncultivated bacteria. Importantly, this implies that the research questions and the available resources are allowed to determine the selection of genomics approach for microbiome studies.
|
|
| 8. |
- Andersen, Christina, et al.
(författare)
-
Inhalation and dermal uptake of particle and gas phase phthalates - A human chamber exposure study
- 2018
-
Ingår i: 15th Conference of the International Society of Indoor Air Quality and Climate, INDOOR AIR 2018. - 9781713826514
-
Konferensbidrag (refereegranskat)abstract
- We have exposed sixteen test subjects to particle and gas phase phthalates in the controlled chamber exposure study. Deuterium labelled phthalates were used to generate particle D4-DEHP (di(2-ethylhexyl) phthalate) and gas phase D4-DEP (diethyl phthalate) for exposures scenarios allowed studying the dermal only and combined inhalational and dermal uptake. Metabolites were measured in urine samples before and after three hours of exposure. The inhalation was the dominant route of uptake for both DEHP and DEP in this study design and exposure settings. Larger uptake of DEP compared to DEHP both via inhalation and dermal uptake was observed. Dermal uptake of DEHP was not observed in this study. Inhalational urinary excretion factors of the metabolites were found to be 0.73 for DEHP and 0.53 for DEP. This study also highlights the importance of taking into consideration the deposited dose of inhaled particles in studies of uptake of particles.
|
|
| 9. |
- Andersen, Christina, et al.
(författare)
-
Inhalation and Dermal Uptake of Particle and Gas-phase Phthalates - A Human Exposure Study
- 2018
-
Ingår i: Environmental Science & Technology. - : American Chemical Society (ACS). - 1520-5851 .- 0013-936X. ; 52:21, s. 12792-12800
-
Tidskriftsartikel (refereegranskat)abstract
- Phthalates are ubiquitous in indoor environments, which raises concern about their endocrine disrupting properties. However, studies of human uptake from airborne exposure are limited. We studied the inhalation uptake and dermal uptake by air-to-skin transfer with clean clothing as a barrier of two deuterium-labelled airborne phthalates: particle-phase D4-DEHP (di-(2-ethylhexyl)phthalate) and gas-phase D4-DEP (diethyl phthalate). Sixteen participants, wearing trousers and long-sleeved shirts, were under controlled conditions exposed to airborne phthalates in four exposure scenarios: dermal uptake alone, and combined inhalation+dermal uptake of both phthalates. The results showed an average uptake of D4-DEHP by inhalation of 0.0014±0.00088 (µg kg-1 bw)/(µg m-3)/h. No dermal uptake of D4-DEHP was observed during the 3 hour exposure with clean clothing. The deposited dose of D4-DEHP accounted for 26% of the total inhaled D4-DEHP mass. For D4-DEP, the average uptake by inhalation+dermal was 0.0067±0.0045 and 0.00073±0.00051 (µg kg-1 bw)/(µg m-3)/h for dermal uptake. Urinary excretion factors of metabolites after inhalation were estimated to 0.69 for D4-DEHP and 0.50 for D4-DEP. Under the described settings, the main uptake of both phthalates was through inhalation. The results demonstrate the differences in uptake of gas and particles, and highlights the importance of considering the deposited dose in particle uptake studies.
|
|
| 10. |
- Andersson, Maria Eva, et al.
(författare)
-
Rapid Clearance and Frequent Reinfection With Enteric Pathogens Among Children With Acute Diarrhea in Zanzibar.
- 2017
-
Ingår i: Clinical Infectious Diseases. - : Oxford University Press (OUP). - 1058-4838 .- 1537-6591. ; 65:8, s. 1371-1377
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Acute infectious gastroenteritis is an important cause of illness and death among children in low-income countries. In addition to rotavirus vaccination, actions to improve nutrition status, sanitation, and water quality are important to reduce enteric infections, which are frequent also among asymptomatic children. The aim of this study was to investigate if the high prevalence of these infections reflects that they often are not cleared properly by the immune response or rather is due to frequent pathogen exposure.Methods: Rectal swabs were collected at time of acute diarrhea and 14 days later from 127 children, aged 2-59 months and living in rural Zanzibar, and were analyzed by real-time polymerase chain reaction targeting multiple pathogens.Results: At baseline, detection rates >20% were found for each of enterotoxigenic Escherichia coli, Shigella, Campylobacter, Cryptosporidium, norovirus GII, and adenovirus. At follow-up, a large proportion of the infections had become cleared (34-100%), or the pathogen load reduced, and this was observed also for agents that were presumably unrelated to diarrhea. Still, the detection frequencies at follow-up were for most agents as high as at baseline, because new infections had been acquired. Neither clearance nor reinfection was associated with moderate malnutrition, which was present in 21% of the children.Conclusions: Children residing in poor socioeconomic conditions, as in Zanzibar, are heavily exposed to enteric pathogens, but capable of rapidly clearing causative and coinfecting pathogens.
|
|
