| 1. |
- Eyer, L., et al.
(författare)
-
Gaia Data Release 2 Variable stars in the colour-absolute magnitude diagram
- 2019
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 623
-
Tidskriftsartikel (refereegranskat)abstract
- Context. The ESA Gaia mission provides a unique time-domain survey for more than 1.6 billion sources with G less than or similar to 21 mag. Aims. We showcase stellar variability in the Galactic colour-absolute magnitude diagram (CaMD). We focus on pulsating, eruptive, and cataclysmic variables, as well as on stars that exhibit variability that is due to rotation and eclipses. Methods. We describe the locations of variable star classes, variable object fractions, and typical variability amplitudes throughout the CaMD and show how variability-related changes in colour and brightness induce "motions". To do this, we use 22 months of calibrated photometric, spectro-photometric, and astrometric Gaia data of stars with a significant parallax. To ensure that a large variety of variable star classes populate the CaMD, we crossmatched Gaia sources with known variable stars. We also used the statistics and variability detection modules of the Gaia variability pipeline. Corrections for interstellar extinction are not implemented in this article. Results. Gaia enables the first investigation of Galactic variable star populations in the CaMD on a similar, if not larger, scale as was previously done in the Magellanic Clouds. Although the observed colours are not corrected for reddening, distinct regions are visible in which variable stars occur. We determine variable star fractions to within the current detection thresholds of Gaia. Finally, we report the most complete description of variability-induced motion within the CaMD to date. Conclusions. Gaia enables novel insights into variability phenomena for an unprecedented number of stars, which will benefit the understanding of stellar astrophysics. The CaMD of Galactic variable stars provides crucial information on physical origins of variability in a way that has previously only been accessible for Galactic star clusters or external galaxies. Future Gaia data releases will enable significant improvements over this preview by providing longer time series, more accurate astrometry, and additional data types (time series BP and RP spectra, RVS spectra, and radial velocities), all for much larger samples of stars.
|
|
| 2. |
|
|
| 3. |
- McKay, James D., et al.
(författare)
-
Large-scale association analysis identifies new lung cancer susceptibility loci and heterogeneity in genetic susceptibility across histological subtypes
- 2017
-
Ingår i: Nature Genetics. - : Nature Publishing Group. - 1061-4036 .- 1546-1718. ; 49:7, s. 1126-1132
-
Tidskriftsartikel (refereegranskat)abstract
- Although several lung cancer susceptibility loci have been identified, much of the heritability for lung cancer remains unexplained. Here 14,803 cases and 12,262 controls of European descent were genotyped on the OncoArray and combined with existing data for an aggregated genomewide association study (GWAS) analysis of lung cancer in 29,266 cases and 56,450 controls. We identified 18 susceptibility loci achieving genome-wide significance, including 10 new loci. The new loci highlight the striking heterogeneity in genetic susceptibility across the histological subtypes of lung cancer, with four loci associated with lung cancer overall and six loci associated with lung adenocarcinoma. Gene expression quantitative trait locus (eQTL) analysis in 1,425 normal lung tissue samples highlights RNASET2, SECISBP2L and NRG1 as candidate genes. Other loci include genes such as a cholinergic nicotinic receptor, CHRNA2, and the telomere-related genes OFBC1 and RTEL1. Further exploration of the target genes will continue to provide new insights into the etiology of lung cancer.
|
|
| 4. |
- Helander, Mikael, et al.
(författare)
-
Parameters Affecting the Cross-flow Filtration of Dissolved LignoBoost Kraft Lignin
- 2015
-
Ingår i: Journal of wood chemistry and technology. - : Taylor & Francis Group. - 0277-3813 .- 1532-2319. ; 36:1, s. 1-8
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- In the kraft pulping process, the lignin-containing by-product kraft black liquor is currently combusted as an energy source. LignoBoost is a technique that extracts lignin from kraft black liquor, resulting in a lignin-lean black liquor, which is returned to the process, and an extracted kraft lignin. To facilitate the use of the extracted kraft lignin in high-value applications, it can be refined via fractionation to produce a more homogeneous starting raw material. Hence, the aim of this study is to investigate the behavior of dissolved softwood kraft lignin during cross-flow filtration. The effects of the lignin concentration, pH, and ionic strength on the fractionation of the dissolved lignin during cross-flow filtration are investigated. The results indicate that large amounts of low-molecular-weight kraft lignin can be produced from solutions having a low lignin concentration. Furthermore, the effects of pH and ionic strength on the fractionation of low-molecular-weight lignin are identified within the studied ranges.
|
|
| 5. |
- Budnyak, Tetyana M., et al.
(författare)
-
Methylene Blue dye sorption by hybrid materials from technical lignins
- 2018
-
Ingår i: Journal of Environmental Chemical Engineering. - : Elsevier. - 2213-3437. ; 6:4, s. 4997-5007
-
Tidskriftsartikel (refereegranskat)abstract
- New hybrid sorbents were synthesized from technical lignins and silica and were applied for the removal of Methylene Blue dye (MB) from aqueous solution. Kraft softwood lignins from LignoBoost (LBL) and CleanFlowBlack (CFBL) processes were used to understand the influence of molecular weight and functionality of initial lignins on the properties of the final hybrids. The synthesized materials were applied as adsorbents for the removal of MB from aqueous solutions. The effects of parameters such as contact time, initial concentration of dye and initial pH on the adsorption capacity were evaluated. The hybrids exhibited higher adsorption capacity than the initial macromolecules of lignin with respect to MB. The hybrid based on CFBL exhibited an adsorption capacity of 60 mg/g; this value was 30% higher than the capacity of the hybrid based on LBL, which was 41.6 mg/g. Lignin hybrid materials extract 80-99% of the dye in a pH range from 3 to 10. The equilibrium and kinetic characteristics of MB uptake by the hybrids followed the Langmuir isotherm model and pseudosecond-order model, rather than the Freundlich and Temkin models, the pseudo-first-order or the intraparticle diffusion model. The attachment of the dye to the hybrid surface was confirmed via FE-SEM and FTIR spectroscopy. The mechanism for MB adsorption was proposed. Due to the high values of regeneration efficiency of the surface of both lignin-silica hybrid materials in 0.1 M HCl (up to 75%) and ethanol (99%), they could be applied as effective sorbents in industrial wastewater treatment processes.
|
|
| 6. |
- Galysh, V., et al.
(författare)
-
Impact of ferrocyanide salts on the thermo-oxidative degradation of lignocellulosic sorbents
- 2017
-
Ingår i: Journal of thermal analysis and calorimetry (Print). - : Springer. - 1388-6150 .- 1588-2926. ; 128:2, s. 1019-1025
-
Tidskriftsartikel (refereegranskat)abstract
- The catalytic effect of ferrocyanide salts of d-metals on the thermo-oxidative degradation of lignocellulose-inorganic sorbents derived from apricot seed shells was investigated by differential thermal analysis. A comparative analysis of the thermal characteristics of the apricot seed shells and the lignocellulose matrix obtained from the shells by alkali-acid pretreatment was performed. It was shown that acid-alkali pretreatment of the apricot seed shells increases the thermal stability of the lignocellulosic material, due to the removal of low molecular weight carbohydrates and other components. The thermal degradation process of the lignocellulose-inorganic samples containing different ferrocyanides occurred at lower temperatures than the initial lignocellulose matrix, indicating the catalytic activity of modifiers. It was demonstrated that for the sorbents containing mixed salts of potassium cobalt and potassium nickel ferrocyanide, thermal destruction ends at temperatures that are 60 A degrees C lower than those for the initial lignocellulose matrix. The obtained results also show that the thermal destruction of composite lignocellulose-inorganic sorbents can be a suitable method for their disposal.
|
|
| 7. |
- Mattsson, Tuve, et al.
(författare)
-
The Development of a Wood-based Materials-biorefinery
- 2017
-
Ingår i: BioResources. - : North Carolina State University. - 1930-2126 .- 1930-2126. ; 12:4, s. 9152-9182
-
Tidskriftsartikel (refereegranskat)abstract
- Several different methods for the extraction, separation, and purification of wood constituents were combined in this work as a unified process with the purpose of achieving a high overall efficiency of material extraction and utilization. This study aimed to present a laboratory-scale demonstrator biorefinery that illustrated how the different wood constituents could be separated from the wood matrix for later use in the production of new bio-based materials and chemicals by combining several approaches. This study builds on several publications and ongoing activities within the Wallenberg Wood Science Center (WWSC) in Sweden on the theme "From wood to material components." Combining the approaches developed in these WWSC projects - including mild steam explosion, membrane and chromatographic separation, enzymatic treatment and leaching, ionic liquid extraction, and fractionation together with Kraft pulping - formed an outline for a complete materials-biorefinery. The process steps involved were tested as integral steps in a linked process. The scale of operations ranged from the kilogram-scale to the gram-scale. The feasibility and efficiency of these process steps in a biorefinery system were assessed, based on the data, beginning with whole wood.
|
|
| 8. |
- Moser, Carl, 1987-, et al.
(författare)
-
Specific surface area increase during cellulose nanofiber manufacturing related to energy input
- 2016
-
Ingår i: BioResources. - : North Carolina State University. - 1930-2126 .- 1930-2126. ; 11:3, s. 7124-7132
-
Tidskriftsartikel (refereegranskat)abstract
- Softwood fibers pretreated with a monocomponent endoglucanase were used to prepare a series of cellulose nanofiber qualities using a microfluidizer and 2 to 34 MWh ton-1 of energy input. The specific surface area was determined for the series using critical point drying and gas adsorption. Although the specific surface area reached a maximum of 430 m2 g-1 at 11 MWh ton-1, the nanofiber yield and transmittance continued to increase beyond this point, indicating that more energy is required to overcome possible friction caused by an interwoven nanofiber network unrelated to the specific surface area. A new method for estimating the surface area was investigated using xyloglucan adsorption in pure water. With this method it was possible to follow the disintegration past the point of maximum specific surface area. The technical significance of these findings is discussed.
|
|
| 9. |
- Moser, Carl, et al.
(författare)
-
Toward Industrially Feasible Methods for Following the Process of Manufacturing Cellulose Nanofibers
- 2015
-
Ingår i: BioResources. - : BioResources. - 1930-2126 .- 1930-2126. ; 10:2, s. 2360-2375
-
Tidskriftsartikel (refereegranskat)abstract
- Nanocellulose is a recently developed form of cellulose that has the potential to be used in many different industries, ranging from food to high-performance applications. This material is commercially manufactured through the homogenization of chemical pulps, but the process is energy-consuming and is still an important subject for development. Simple, robust methods are required for the quality control and optimization of industrial nanocellulose production. In this study, a number of different methods, based on different principles of monitoring the manufacture of cellulose nanofibers were evaluated and compared for five different nanocellulose qualities, both for their resolution and robustness/ease. Methods based on microscopy, light scattering, centrifugation, and viscosity were examined and all appeared useful for observing the manufacturing process during its initial stage. However, only methods based on centrifugation, turbidity, and transmittance yielded reliable data for the entire manufacturing process. Of these methods, transmittance measurement may be the best candidate for routine use because the method is simple, rapid, and only requires spectrophotometer equipment.
|
|
| 10. |
- Rahman, Hafizur
(författare)
-
Modifying kraft pulping to produce a softwood pulp requiring less energy in tissue paper production
- 2018
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Modification of softwood kraft pulp by the addition of either polysulfide (PS) or sodium borohydride (NaBH4) has been shown to increase the pulp yield due to a higher retention of glucomannan. The pulps with higher yield gave a paper with higher tensile index than reference pulp, especially at lower degrees of refining. The higher yield pulps also showed a greater porosity of the fibre wall, indicating an increase in the swelling potential of the fibres. This can lead to increased fibre flexibility and increased joint strength between the fibres and to the higher handsheet tensile index. However, the swelling increase associated with the higher hemicellulose content could also make dewatering more challenging because of the higher water retention of the pulp. The results of this study show however that the positive influence of the increase in yield (fewer fibres and a more open sheet structure) dominates over the negative influence of the higher hemicellulose content on the dewatering properties, especially at lower refining energy levels. Studies simulating full-scale tissue machine dewatering conditions showed that pulps with a higher yield and a higher hemicellulose content had a higher tensile index at the same dryness. Moreover, the same dryness level was achieved in a shorter dwell-time. A given tensile index was also achieved with less refining energy.Increasing the yield and hemicellulose content by the addition of either an oxidizing or a reducing agent in the softwood kraft pulping process thus has a potential for giving high quality fibres for tissue paper production with less refining energy and lower drying energy costs.
|
|
