| 1. |
- Li, Guowei, et al.
(författare)
-
Carbon-Tailored Semimetal MoP as an Efficient Hydrogen Evolution Electrocatalyst in Both Alkaline and Acid Media
- 2018
-
Ingår i: Advanced Energy Materials. - : WILEY-V C H VERLAG GMBH. - 1614-6832 .- 1614-6840. ; 8:24
-
Tidskriftsartikel (refereegranskat)abstract
- The electrolysis processes such as hydrogen evolution reaction (HER) require high efficient catalysts with robust surface stability. A high conductivity is also necessary to speed up the charge transport between the catalyst and the electrolyte. Recently, the observation of exceedingly high conductivity in the topological semimetal MoP, has provided a model catalyst to investigate the correlation between the electrical transport and the electrocatalytic activity for the HER. Thus, MoP is encapsulated in a Mo, P codoped carbon layer (MoP@C). This composite material exhibits outstanding HER performance, with an extremely low overpotential of 49 mV at a current density of 10 mA cm(-2) and a Tafel slope of 54 mV dec(-1) in an alkaline medium. In addition, electron transport analysis indicates that MoP exhibits high conductivity and mobility due to the existence of triple-point fermions and a complex Fermi surface. Furthermore, the presence of P-C and Mo-C bonds at the interface between the carbon layer and the MoP particles modulates the band structure of MoP@C and facilitates fast electron transfer, accumulation, and subsequent delocalization, which are in turn responsible for the excellent HER activity.
|
|
| 2. |
- Liu, Yang, et al.
(författare)
-
Genome Assembly of the Common Pheasant Phasianus colchicus : A Model for Speciation and Ecological Genomics
- 2019
-
Ingår i: Genome Biology and Evolution. - : Oxford University Press (OUP). - 1759-6653. ; 11:12, s. 3326-3331
-
Tidskriftsartikel (refereegranskat)abstract
- The commonpheasant (Phasianus colchicus) in the order Galliformes and the family Phasianidae, has 30 subspecies distributed across its native range in the Palearctic realm and has been introduced to Europe, NorthAmerica, and Australia. It is an important game bird often subjected to wildlife management as well as a model species to study speciation, biogeography, and local adaptation. However, the genomic resources for the commonpheasant are generally lacking. We sequenced a male individual of the subspecies torquatus of the common pheasant with the Illumina HiSeq platform. We obtained 94.88Gb of usable sequences by filtering out low-quality reads of the raw data generated. This resulted in a 1.02Gb final assembly, which equals the estimated genome size. BUSCO analysis using chicken as a model showed that 93.3% of genes were complete. The contig N50 and scaffold N50 sizes were 178 kb and 10.2 Mb, respectively. All these indicate that we obtained a high-quality genome assembly. We annotated 16,485 protein-coding genes and 123.3 Mb (12.05% of the genome) of repetitive sequences by ab initio and homology-based prediction. Furthermore, we applied a RAD-sequencing approach for another 45 individuals of seven representative subspecies in China and identified 4,376,351 novel single nucleotide polymorphism (SNPs) markers. Using this unprecedented data set, we uncovered the geographic population structure and genetic introgression among common pheasants in China. Our results provide the first high-quality reference genome for the common pheasant and a valuable genome-wide SNP database for studying population genomics and demographic history.
|
|
| 3. |
- Sampson, Joshua N., et al.
(författare)
-
Analysis of Heritability and Shared Heritability Based on Genome-Wide Association Studies for 13 Cancer Types
- 2015
-
Ingår i: Journal of the National Cancer Institute. - : Oxford University Press (OUP). - 0027-8874 .- 1460-2105. ; 107:12
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Studies of related individuals have consistently demonstrated notable familial aggregation of cancer. We aim to estimate the heritability and genetic correlation attributable to the additive effects of common single-nucleotide polymorphisms (SNPs) for cancer at 13 anatomical sites. Methods: Between 2007 and 2014, the US National Cancer Institute has generated data from genome-wide association studies (GWAS) for 49 492 cancer case patients and 34 131 control patients. We apply novel mixed model methodology (GCTA) to this GWAS data to estimate the heritability of individual cancers, as well as the proportion of heritability attributable to cigarette smoking in smoking-related cancers, and the genetic correlation between pairs of cancers. Results: GWAS heritability was statistically significant at nearly all sites, with the estimates of array-based heritability, h(l)(2), on the liability threshold (LT) scale ranging from 0.05 to 0.38. Estimating the combined heritability of multiple smoking characteristics, we calculate that at least 24% (95% confidence interval [CI] = 14% to 37%) and 7% (95% CI = 4% to 11%) of the heritability for lung and bladder cancer, respectively, can be attributed to genetic determinants of smoking. Most pairs of cancers studied did not show evidence of strong genetic correlation. We found only four pairs of cancers with marginally statistically significant correlations, specifically kidney and testes (rho = 0.73, SE = 0.28), diffuse large B-cell lymphoma (DLBCL) and pediatric osteosarcoma (rho = 0.53, SE = 0.21), DLBCL and chronic lymphocytic leukemia (CLL) (rho = 0.51, SE = 0.18), and bladder and lung (rho = 0.35, SE = 0.14). Correlation analysis also indicates that the genetic architecture of lung cancer differs between a smoking population of European ancestry and a nonsmoking Asian population, allowing for the possibility that the genetic etiology for the same disease can vary by population and environmental exposures. Conclusion: Our results provide important insights into the genetic architecture of cancers and suggest new avenues for investigation.
|
|
| 4. |
- Chen, Shujing, et al.
(författare)
-
Manufacturing Graphene-Encapsulated Copper Particles by Chemical Vapor Deposition in a Cold Wall Reactor
- 2019
-
Ingår i: ChemistryOpen. - : Wiley. - 2191-1363. ; 8:1, s. 58-63
-
Tidskriftsartikel (refereegranskat)abstract
- Functional fillers, such as Ag, are commonly employed for effectively improving the thermal or electrical conductivity in polymer composites. However, a disadvantage of such a strategy is that the cost and performance cannot be balanced simultaneously. Therefore, the drive to find a material with both a cost efficient fabrication process and excellent performance attracts intense research interest. In this work, inspired by the core-shell structure, we developed a facile manufacturing method to prepare graphene-encapsulated Cu nanoparticles (GCPs) through utilizing an improved chemical vapor deposition (CVD) system with a cold wall reactor. The obtained GCPs could retain their spherical shape and exhibited an outstanding thermal stability up to 179 degrees C. Owing to the superior thermal conductivity of graphene and excellent oxidation resistance of GCPs, the produced GCPs are practically used in a thermally conductive adhesive (TCA), which commonly consists of Ag as the functional filler. Measurement shows a substantial 74.6 % improvement by partial replacement of Ag with GCPs.
|
|
| 5. |
- Feng, Zhiwei, et al.
(författare)
-
An Efficient UAV Hijacking Detection Method Using Onboard Inertial Measurement Unit
- 2019
-
Ingår i: ACM Transactions on Embedded Computing Systems. - : ASSOC COMPUTING MACHINERY. - 1539-9087 .- 1558-3465. ; 17:6
-
Tidskriftsartikel (refereegranskat)abstract
- With the fast growth of civil drones, their security problems meet significant challenges. A commercial drone may be hijacked by a GPS-spoofing attack for illegal activities, such as terrorist attacks. The target of this article is to develop a technique that only uses onboard gyroscopes to determine whether a drone has been hijacked. Ideally, GPS data and the angular velocities measured by gyroscopes can be used to estimate the acceleration of a drone, which can be further compared with the measurement of the accelerometer to detect whether a drone has been hijacked. However, the detection results may not always be accurate due to some calculation and measurement errors, especially when no hijacking occurs in curve trajectory situations. To overcome this, in this article, we propose a novel and simple method to detect hijacking only based on gyroscopes' measurements and GPS data, without using any accelerometer in the detection procedure. The computational complexity of our method is very low, which is suitable to be implemented in the drones with micro-controllers. On the other hand, the proposed method does not rely on any accelerometer to detect attacks, which means it receives less information in the detection procedure and may reduce the results accuracy in some special situations. While the previous method can compensate for this flaw, the high detection results also can be guaranteed by using the above two methods. Experiments with a quad-rotor drone are conducted to show the effectiveness of the proposed method and the combination method.
|
|
| 6. |
- Feng, Zhiwei, et al.
(författare)
-
Efficient Drone Hijacking Detection using Onboard Motion Sensors
- 2017
-
Ingår i: Proceedings Of The 2017 Design, Automation & Test In Europe Conference & Exhibition (DATE). - : IEEE. - 9783981537093 ; , s. 1414-1419
-
Konferensbidrag (refereegranskat)abstract
- The fast growth of civil drones raises significant security challenges. A legitimate drone may be hijacked by GPS spoofing for illegal activities, such as terrorist attacks. The target of this paper is to develop techniques to let drones detect whether they have been hijacked using onboard motion sensors (accelerometers and gyroscopes). Ideally, the linear acceleration and angular velocity measured by motion sensors can be used to estimate the position of a drone, which can be compared with the position reported by GPS to detect whether the drone has been hijacked. However, the position estimation by motion sensors is very inaccurate due to the significant error accumulation over time. In this paper, we propose a novel method to detect hijacking based on motion sensors measurements and GPS, which overcomes the accumulative error problem. The computational complexity of our method is very low, and thus is suitable to be implemented in the micro-controllers of drones. Experiments with a quad-rotor drone are conducted to show the effectiveness of the proposed method.
|
|
| 7. |
- Liu, Di, et al.
(författare)
-
EDF-VD scheduling of mixed-criticality systems with degraded quality guarantees
- 2016
-
Ingår i: Proc. 37th Real-Time Systems Symposium. - : IEEE Computer Society. - 9781509053032 ; , s. 35-46
-
Konferensbidrag (refereegranskat)abstract
- This paper studies real-time scheduling of mixed-criticality systems where low-criticality tasks are still guaranteed some service in the high-criticality mode, with reduced execution budgets. First, we present a utilization-based schedulability test for such systems under EDF-VD scheduling. Second, we quantify the suboptimality of EDF-VD (with our test condition) in terms of speedup factors. In general, the speedup factor is a function with respect to the ratio between the amount of resource required by different types of tasks in different criticality modes, and reaches 4/3 in the worst case. Furthermore, we show that the proposed utilization-based schedulability test and speedup factor results apply to the elastic mixed-criticality model as well. Experiments show effectiveness of our proposed method and confirm the theoretical suboptimality results.
|
|
| 8. |
- Liu, Ya, 1991, et al.
(författare)
-
Effect of Boron Nitride Particle Geometry on the Thermal Conductivity of a Boron Nitride Enhanced Polymer Composite Film
- 2019
-
Ingår i: THERMINIC 2019 - 2019 25th International Workshop Thermal Investigations of ICs and Systems.
-
Konferensbidrag (refereegranskat)abstract
- Hexagonal Boron Nitride (h-BN) has been considered as a promising enhancement filler for thermal management due to its high thermal conductivity, structural stability, and super electrical resistivity. Numerus studies have reported using BN as an enhancement filler to achieve high thermally conductive polymer based thermal management materials. However, there are limited data regarding the influence of the flake size of BN sheets to the thermal management property of BN filled composites. In this work, three h-BN size geometries, including microscale h-BN powder, h-BN nanosheets, and a mixture of micro and nanoscale h-BN, were studied regarding its thermal transfer performance. The results show that h-BN nanosheets are able to achieve the highest in-plane thermal conductivity with loading from 0 - 5 wt% while for the through-plane thermal conductivity, all three geometries show similar thermal property when the filler loading less than 5 wt%. Through-plane thermal conductivity exhibits a sudden increase to 5.69 W m-1 K-1 at a loading of 5 wt%..
|
|
| 9. |
- Liu, Ya, 1991, et al.
(författare)
-
Surface modification of graphene for use as a structural Fortifier in water-borne epoxy coatings
- 2019
-
Ingår i: Coatings. - : MDPI AG. - 2079-6412. ; 9:11
-
Tidskriftsartikel (refereegranskat)abstract
- Graphene, the typical two-dimensional sp2 hybridized carbon allotrope, is widely used as a filler for improving the mechanical performance of polymers. However, its superhydrophobic surface makes it a big challenge to obtain stable graphene dispersions, especially in water-borne systems. On the contrary, graphene oxide (GO) shows excellent dispersibility in water, but strong oxidants and acids destroy its structure and degrade its mechanical properties. This largely limits its application in water-borne coatings. In this work, graphene from mechanical exfoliation was surface modified by p-aminophenol derived diazonium salt to achieve a homogenous dispersion. Moreover, the hydroxyl groups in p-aminophenol are able to combine with epoxy resins during the curing process to improve mechanical performance of the final coatings. The result shows that functionalized graphene shows a lower coefficient of friction and better abrasion resistance compared to GO.
|
|
| 10. |
- Liu, Ya, 1991, et al.
(författare)
-
Thermally Conductive and Electrically Insulating PVP/Boron Nitride Composite Films for Heat Spreader
- 2019
-
Ingår i: Proceedings - 2019 IMAPS Nordic Conference on Microelectronics Packaging, NORDPAC 2019. ; , s. 1-5
-
Konferensbidrag (refereegranskat)abstract
- Thermally conductive materials with electrically insulating properties have been extensively investigated for thermal management of electronic devices. The combined properties of high thermal conductivity, structural stability, corrosion resistance and electric resistivity make hexagonal boron nitride (h-BN) a promising candidate for this purpose. Theoretical studies have revealed that h-BN has a high in-plane thermal conductivity up to 400-800 W m-1 K-1 at room temperature. However, it is still a big challenge to achieve high thermally conductive h-BN thick films that are commercially feasible due to its poor mechanical properties. On the other hand, many polymers exhibit advantages for flexibility. Thus, combining the merits of polymer and the high thermal conductivity of h-BN particles is considered as a promising solution for this issue. In this work, orientated PVP/h-BN films were prepared by electrospinning and a subsequent mechanical pressing process. With the optimized h-BN loading, a PVP/h-BN composite film with up to 22 W m-1 K-1 and 0.485 W m-1 K-1 for in-plane and through-plane thermal conductivity can be achieved, respectively. We believe this work can help accelerate the development of h-BN for thermal management applications.
|
|
