| 1. |
- Li, Guowei, et al.
(författare)
-
Carbon-Tailored Semimetal MoP as an Efficient Hydrogen Evolution Electrocatalyst in Both Alkaline and Acid Media
- 2018
-
Ingår i: Advanced Energy Materials. - : WILEY-V C H VERLAG GMBH. - 1614-6832 .- 1614-6840. ; 8:24
-
Tidskriftsartikel (refereegranskat)abstract
- The electrolysis processes such as hydrogen evolution reaction (HER) require high efficient catalysts with robust surface stability. A high conductivity is also necessary to speed up the charge transport between the catalyst and the electrolyte. Recently, the observation of exceedingly high conductivity in the topological semimetal MoP, has provided a model catalyst to investigate the correlation between the electrical transport and the electrocatalytic activity for the HER. Thus, MoP is encapsulated in a Mo, P codoped carbon layer (MoP@C). This composite material exhibits outstanding HER performance, with an extremely low overpotential of 49 mV at a current density of 10 mA cm(-2) and a Tafel slope of 54 mV dec(-1) in an alkaline medium. In addition, electron transport analysis indicates that MoP exhibits high conductivity and mobility due to the existence of triple-point fermions and a complex Fermi surface. Furthermore, the presence of P-C and Mo-C bonds at the interface between the carbon layer and the MoP particles modulates the band structure of MoP@C and facilitates fast electron transfer, accumulation, and subsequent delocalization, which are in turn responsible for the excellent HER activity.
|
|
| 2. |
- Li, Guowei, et al.
(författare)
-
Synergistically creating sulfur vacancies in semimetal-supported amorphous MoS2 for efficient hydrogen evolution
- 2019
-
Ingår i: Applied Catalysis B. - : Elsevier. - 0926-3373 .- 1873-3883. ; 254
-
Tidskriftsartikel (refereegranskat)abstract
- The presence of elemental vacancies in materials are inevitable according to statistical thermodynamics, which will decide the chemical and physical properties of the investigated system. However, the controlled manipulation of vacancies for specific applications is a challenge. Here we report a facile method for creating large concentrations of S vacancies in the inert basal plane of MoS2 supported on semimetal CoMoP2. With a small applied potential, S atoms can be removed in the form of H2S due to the optimized free energy of formation. The existence of vacancies favors electron injection from the electrode to the active site by decreasing the contact resistance. As a consequence, the catalytic current is increased by 221% with the vacancy-rich MoS2 as electrocatalyst for hydrogen evolution reaction (HER). A small overpotential of 75 mV is needed to deliver a current density of 10 mA cm(-2), which is considered among the best values achieved for MoS2. It is envisaged that this work may provide a new strategy for utilizing the semimetal phase for structuring MoS2 into a multi-functional material.
|
|
| 3. |
- Wang, Heyong, et al.
(författare)
-
Efficient perovskite light-emitting diodes based on a solution-processed tin dioxide electron transport layer
- 2018
-
Ingår i: Journal of Materials Chemistry C. - : ROYAL SOC CHEMISTRY. - 2050-7526 .- 2050-7534. ; 6:26, s. 6996-7002
-
Tidskriftsartikel (refereegranskat)abstract
- To achieve high-performance perovskite light-emitting diodes (PeLEDs), an appropriate functional layer beneath the perovskite emissive layer is significantly important to modulate the morphology of the perovskite film and to facilitate charge injection and transport in the device. Herein, for the first time, we report efficient n-i-p structured PeLEDs using solution-processed SnO2 as an electron transport layer. Three-dimensional perovskites, such as CH(NH2)(2)PbI3 and CH3NH3PbI3, are found to be more chemically compatible with SnO2 than with commonly used ZnO. In addition, SnO2 shows good transparency, excellent morphology and suitable energy levels. These properties make SnO2 a promising candidate in both three-and low-dimensional PeLEDs, among which a high external quantum efficiency of 7.9% has been realized. Furthermore, interfacial materials that are widely used to improve the device performances of ZnO-based PeLEDs are also applied on SnO2-based PeLEDs and their effects have been systematically studied. In contrast to ZnO, SnO2 modified by these interfacial materials shows detrimental effects due to photoluminescence quenching.
|
|
| 4. |
- Xu, Weidong, 1988-, et al.
(författare)
-
Rational molecular passivation for high-performance perovskite light-emitting diodes
- 2019
-
Ingår i: Nature Photonics. - : Springer Nature Publishing AG. - 1749-4885 .- 1749-4893. ; 13:6, s. 418-424
-
Tidskriftsartikel (refereegranskat)abstract
- A major efficiency limit for solution-processed perovskite optoelectronic devices, for example light-emitting diodes, is trap-mediated non-radiative losses. Defect passivation using organic molecules has been identified as an attractive approach to tackle this issue. However, implementation of this approach has been hindered by a lack of deep understanding of how the molecular structures influence the effectiveness of passivation. We show that the so far largely ignored hydrogen bonds play a critical role in affecting the passivation. By weakening the hydrogen bonding between the passivating functional moieties and the organic cation featuring in the perovskite, we significantly enhance the interaction with defect sites and minimize non-radiative recombination losses. Consequently, we achieve exceptionally high-performance near-infrared perovskite light-emitting diodes with a record external quantum efficiency of 21.6%. In addition, our passivated perovskite light-emitting diodes maintain a high external quantum efficiency of 20.1% and a wall-plug efficiency of 11.0% at a high current density of 200 mA cm−2, making them more attractive than the most efficient organic and quantum-dot light-emitting diodes at high excitations.
|
|
| 5. |
- Jin, Yingzhi, et al.
(författare)
-
Laminated Free Standing PEDOT:PSS Electrode for Solution Processed Integrated Photocapacitors via Hydrogen-Bond Interaction
- 2017
-
Ingår i: ADVANCED MATERIALS INTERFACES. - : WILEY. - 2196-7350. ; 4:23
-
Tidskriftsartikel (refereegranskat)abstract
- In this work, a novel lamination method employing hydrogen-bond interaction to assemble a highly conductive free standing poly(3,4-ethylene dioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) film as a common electrode is demonstrated in a solution processed metal-free foldable integrated photocapacitor (IPC) composed of a monolithic organic solar cell (OSC) and a capacitor. The highlights of the work are:(1) micrometer free standing PEDOT:PSS electrode is successfully laminated onto a relatively large area (1 cm(2)) OSCs; (2) a free standing capacitor based on the PEDOT:PSS electrode is achieved; (3) the IPC demonstrates an overall efficiency of 2% and an energy storage efficiency of 58%, which is comparable with those of IPCs based on metallic common electrodes; (4) the novel lamination method for PEDOT:PSS electrode enables free standing PEDOT:PSS broad applications in solution processed flexible organic electronics, especially tandem or/and integrated organic electronic devices. Furthermore, the IPC is foldable with excellent cycling stability (no decay after 100 recycles at 1 mA cm(-2)). These results indicate that free standing PEDOT:PSS film is a promising candidate as common electrodes for IPCs to break the restrictions of metal electrodes. The demonstrated lamination method will greatly extend the applications of PEDOT:PSS electrodes to large area flexible organic electronic devices.
|
|
| 6. |
- Li, Guowei, et al.
(författare)
-
Dirac Nodal Arc Semimetal PtSn4: An Ideal Platform for Understanding Surface Properties and Catalysis for Hydrogen Evolution
- 2019
-
Ingår i: Angewandte Chemie International Edition. - : WILEY-V C H VERLAG GMBH. - 1433-7851 .- 1521-3773.
-
Tidskriftsartikel (refereegranskat)abstract
- Conductivity, carrier mobility, and a suitable Gibbs free energy are important criteria that determine the performance of catalysts for a hydrogen evolution reaction (HER). However, it is a challenge to combine these factors into a single compound. Herein, we discover a superior electrocatalyst for a HER in the recently identified Dirac nodal arc semimetal PtSn4. The determined turnover frequency (TOF) for each active site of PtSn4 is 1.54 H-2 s(-1) at 100 mV. This sets a benchmark for HER catalysis on Pt-based noble metals and earth-abundant metal catalysts. We make use of the robust surface states of PtSn4 as their electrons can be transferred to the adsorbed hydrogen atoms in the catalytic process more efficiently. In addition, PtSn4 displays excellent chemical and electrochemical stabilities after long-term exposure in air and long-time HER stability tests.
|
|
| 7. |
- Ning, Weihua, et al.
(författare)
-
Long Electron-Hole Diffusion Length in High-Quality Lead-Free Double Perovskite Films
- 2018
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 30:20
-
Tidskriftsartikel (refereegranskat)abstract
- Developing environmentally friendly perovskites has become important in solving the toxicity issue of lead-based perovskite solar cells. Here, the first double perovskite (Cs2AgBiBr6) solar cells using the planar structure are demonstrated. The prepared Cs2AgBiBr6 films are composed of high-crystal-quality grains with diameters equal to the film thickness, thus minimizing the grain boundary length and the carrier recombination. These high-quality double perovskite films show long electron-hole diffusion lengths greater than 100 nm, enabling the fabrication of planar structure double perovskite solar cells. The resulting solar cells based on planar TiO2 exhibit an average power conversion efficiency over 1%. This work represents an important step forward toward the realization of environmentally friendly solar cells and also has important implications for the applications of double perovskites in other optoelectronic devices.
|
|
| 8. |
- Shi, Shengwei, et al.
(författare)
-
11,11,12,12-Tetracyanonaphtho-2,6-quinodimethane in Contact with Ferromagnetic Electrodes for Organic Spintronics
- 2018
-
Ingår i: Advanced Electronic Materials. - : WILEY. - 2199-160X. ; 4:7
-
Tidskriftsartikel (refereegranskat)abstract
- Spinterface engineering has shown quite important roles in organic spintronics as it can improve spin injection or extraction. In this study, 11,11,12,12-tetracyanonaptho-2,6-quinodimethane (TNAP) is introduced as an interfacial layer for a prototype interface of Fe/TNAP. An element-specific investigation of the electronic and magnetic structures of Fe/TNAP system by use of near edge X-Ray absorption fine structure (NEXAFS) and X-ray magnetic circular dichroism (XMCD) is reported. Strong hybridization between TNAP and Fe and induced magnetization of N atoms in TNAP molecule are observed. XMCD sum rule analysis demonstrates that the adsorption of TNAP reduces the spin moment of Fe by 12%. In addition, induced magnetization in N K-edge of TNAP is also found with other commonly used ferromagnets in organic spintronics, such as La0.7Sr0.3MnO3 and permalloy, which makes TNAP a very promising molecule for spinterface engineering in organic spintronics.
|
|
| 9. |
- Xiong, Shaobing, et al.
(författare)
-
Engineering of the Back Contact between PCBM and Metal Electrode for Planar Perovskite Solar Cells with Enhanced Efficiency and Stability
- 2019
-
Ingår i: Advanced Optical Materials. - : WILEY-V C H VERLAG GMBH. - 2162-7568 .- 2195-1071. ; 7:19
-
Tidskriftsartikel (refereegranskat)abstract
- The cathode interface plays a critical role in achieving high-performance fullerene/perovskite planar solar cells. Herein, the simple molecule Isatin and its derivatives are introduced at the back contact [6,6]-phenyl-C61-butyric acid methyl ester (PCBM)/Al as a cathode modification interlayer. It is revealed that the Isatin interlayers facilitate electron transport/extraction and suppress electron recombination, attributed to the formation of negative dipole potential steps and the passivation of the interfacial trap density. The average power conversion efficiencies of the resulting devices are significantly improved by 11% from 17.68% to 19.74%, with an enhancement in all device parameters including short-circuit current, open-circuit voltage, and fill factor. The hysteresis index is found to disappear. In addition, such interlayer enhances device stability under ambient conditions compared to the control devices due to suppression of moisture-induced degradation of the perovskite films. These findings provide a comprehensive understanding of the engineering of the back contact between PCBM and the metal electrode to improve efficiency and stability of perovskite solar cells.
|
|
| 10. |
- Adam, Rania Elhadi, 1978-, et al.
(författare)
-
Graphene-based plasmonic nanocomposites for highly enhanced solar-driven photocatalytic activities
- 2019
-
Ingår i: RSC Advances. - Cambridge : Royal Meteorological Society. - 2046-2069. ; 9:52, s. 30585-30598
-
Tidskriftsartikel (refereegranskat)abstract
- High-efficiency photocatalysts are crucial for the removal of organic pollutants and environmental sustainability. In the present work, we report on a new low-temperature hydrothermal chemical method, assisted by ultrasonication, to synthesize disruptive plasmonic ZnO/graphene/Ag/AgI nanocomposites for solar-driven photocatalysis. The plasmonic nanocomposites were investigated by a wide range of characterization techniques, confirming successful formation of photocatalysts with excellent degradation efficiency. Using Congo red as a model dye molecule, our experimental results demonstrated a photocatalytic reactivity exceeding 90% efficiency after one hour simulated solar irradiation. The significantly enhanced degradation efficiency is attributed to improved electronic properties of the nanocomposites by hybridization of the graphene and to the addition of Ag/AgI which generates a strong surface plasmon resonance effect in the metallic silver further improving the photocatalytic activity and stability under solar irradiation. Scavenger experiments suggest that superoxide and hydroxyl radicals are responsible for the photodegradation of Congo red. Our findings are important for the fundamental understanding of the photocatalytic mechanism of ZnO/graphene/Ag/AgI nanocomposites and can lead to further development of novel efficient photocatalyst materials.
|
|
