1. |
- Xu, Weidong, 1988-, et al.
(författare)
-
Rational molecular passivation for high-performance perovskite light-emitting diodes
- 2019
-
Ingår i: Nature Photonics. - : Springer Nature Publishing AG. - 1749-4885 .- 1749-4893. ; 13:6, s. 418-424
-
Tidskriftsartikel (refereegranskat)abstract
- A major efficiency limit for solution-processed perovskite optoelectronic devices, for example light-emitting diodes, is trap-mediated non-radiative losses. Defect passivation using organic molecules has been identified as an attractive approach to tackle this issue. However, implementation of this approach has been hindered by a lack of deep understanding of how the molecular structures influence the effectiveness of passivation. We show that the so far largely ignored hydrogen bonds play a critical role in affecting the passivation. By weakening the hydrogen bonding between the passivating functional moieties and the organic cation featuring in the perovskite, we significantly enhance the interaction with defect sites and minimize non-radiative recombination losses. Consequently, we achieve exceptionally high-performance near-infrared perovskite light-emitting diodes with a record external quantum efficiency of 21.6%. In addition, our passivated perovskite light-emitting diodes maintain a high external quantum efficiency of 20.1% and a wall-plug efficiency of 11.0% at a high current density of 200 mA cm−2, making them more attractive than the most efficient organic and quantum-dot light-emitting diodes at high excitations.
|
|
2. |
- Zhang, Jianyun, et al.
(författare)
-
Revealing the Critical Role of the HOMO Alignment on Maximizing Current Extraction and Suppressing Energy Loss in Organic Solar Cells
- 2019
-
Ingår i: iScience. - : Cell Press. - 2589-0042. ; 19, s. 883-893
-
Tidskriftsartikel (refereegranskat)abstract
- For state-of-the-art organic solar cells (OSCs) consisting of a large-bandgap polymer donor and a near-infrared (NIR) molecular acceptor, the control of the HOMO offset is the key to simultaneously achieve small energy loss (Eloss) and high photocurrent. However, the relationship between HOMO offsets and the efficiency for hole separation is quite elusive so far, which requires a comprehensive understanding on how small the driving force can effectively perform the charge separation while obtaining a high photovoltage to ensure high OSC performance. By designing a new family of ZITI-X NIR acceptors (X = S, C, N) with a high structural similarity and matching them with polymer donor J71 forming reduced HOMO offsets, we systematically investigated and established the relationship among the photovoltaic performance, energy loss, and hole-transfer kinetics. We achieved the highest PCEavgs of 14.05 ± 0.21% in a ternary system (J71:ZITI-C:ZITI-N) that best optimize the balance between driving force and energy loss.
|
|
3. |
- Bi, Zhaozhao, et al.
(författare)
-
Individual nanostructure optimization in donor and acceptor phases to achieve efficient quaternary organic solar cells
- 2019
-
Ingår i: Nano Energy. - : ELSEVIER. - 2211-2855 .- 2211-3282. ; 66
-
Tidskriftsartikel (refereegranskat)abstract
- Fullerene derivative (PC71BM) and high crystallinity molecule (DR3TBDTT) are employed into PTB7-Th:FOIC based organic solar cells (OSCs) to cooperate an individual nanostructure optimized quaternary blend. PC71BM functions as molecular adjuster and phase modifier promoting FOIC forming "head-to-head" molecular packing and neutralizing the excessive FOIC crystallites. A multi-scale modified morphology is present thanks to the mixture of FOIC and PC71BM while DR3TBDTT disperses into PTB7-Th matrix to reinforce donors crystal-linity and enhance domain purity. Morphology characterization highlights the importance of individually optimizated nanostructures for donor and acceptor, which contributes to efficient hole and electron transport toward improved carrier mobilities and suppressed non-geminated recombination. Therefore, a power conversion efficiency of 13.51% is realized for a quaternary device which is 16% higher than the binary device (PTB7-Th:FOIC). This work demonstrates that utilizing quaternary strategy for simultaneous optimization of donor and acceptor phases is a feasible way to realize high efficient OSCs.
|
|
4. |
- Jin, Yingzhi, et al.
(författare)
-
Limitations and Perspectives on Triplet-Material-Based Organic Photovoltaic Devices
- 2019
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 31:22
-
Tidskriftsartikel (refereegranskat)abstract
- Organic photovoltaic cells (OPVs) have attracted broad attention and become a very energetic field after the emergence of nonfullerene acceptors. Long-lifetime triplet excitons are expected to be good candidates for efficiently harvesting a photocurrent. Parallel with the development of OPVs based on singlet materials (S-OPVs), the potential of triplet materials as photoactive layers has been explored. However, so far, OPVs employing triplet materials in a bulk heterojunction have not exhibited better performance than S-OPVs. Here, the recent progress of representative OPVs based on triplet materials (T-OPVs) is briefly summarized. Based on that, the performance limitations of T-OPVs are analyzed. The shortage of desired triplet materials with favorable optoelectronic properties for OPVs, the tradeoff between long lifetime and high binding energy of triplet excitons, as well as the low charge mobility in most triplet materials are crucial issues restraining the efficiencies of T-OPVs. To overcome these limitations, first, novel materials with desired optoelectronic properties are urgently demanded; second, systematic investigation on the contribution and dynamics of triplet excitons in T-OPVs is necessary; third, close multidisciplinary collaboration is required, as proved by the development of S-OPVs.
|
|
5. |
- Yuan, Zhongcheng, et al.
(författare)
-
Unveiling the synergistic effect of precursor stoichiometry and interfacial reactions for perovskite light-emitting diodes
- 2019
-
Ingår i: Nature Communications. - : NATURE PUBLISHING GROUP. - 2041-1723. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- Metal halide perovskites are emerging as promising semiconductors for cost-effective and high-performance light-emitting diodes (LEDs). Previous investigations have focused on the optimisation of the emissive perovskite layer, for example, through quantum confinement to enhance the radiative recombination or through defect passivation to decrease non-radiative recombination. However, an in-depth understanding of how the buried charge transport layers affect the perovskite crystallisation, though of critical importance, is currently missing for perovskite LEDs. Here, we reveal synergistic effect of precursor stoichiometry and interfacial reactions for perovskite LEDs, and establish useful guidelines for rational device optimization. We reveal that efficient deprotonation of the undesirable organic cations by a metal oxide interlayer with a high isoelectric point is critical to promote the transition of intermediate phases to highly emissive perovskite films. Combining our findings with effective defect passivation of the active layer, we achieve high-efficiency perovskite LEDs with a maximum external quantum efficiency of 19.6%.
|
|
6. |
- Zhang, Liangdong, et al.
(författare)
-
Bright Free Exciton Electroluminescence from Mn-Doped Two-Dimensional Layered Perovskites
- 2019
-
Ingår i: The Journal of Physical Chemistry Letters. - : AMER CHEMICAL SOC. - 1948-7185. ; 10:11, s. 3171-3175
-
Tidskriftsartikel (refereegranskat)abstract
- Two-dimensional (2D) perovskites incorporating hydrophobic organic spacer cations show improved film stability and morphology compared to their three-dimensional (3D) counterparts. However, 2D perovskites usually exhibit low photoluminescence quantum efficiency (PLQE) owing to strong exciton-phonon interaction at room temperature, which limits their efficiency in light-emitting diodes (LEDs). Here, we demonstrate that the device performance of 2D perovskite LEDs can be significantly enhanced by doping Mn(2+)in (benzimidazolium)(2)PbI4 2D perovskite films to suppress the exciton-phonon interaction. The distorted [PbI6](4-) octahedra by Mn-doping and the rigid benzimidazolium (BIZ) ring without branched chains in the 2D perovskite structure lead to improved crystallinity and rigidity of the perovskites, resulting in suppressed phonon-exciton interaction and enhanced PLQE. On the basis of this strategy, for the first time, we report yellow electroluminescence from free excitons in 2D (n = 1) perovskites with a maximum brightness of 225 cd m(-2) and a peak EQE of 0.045%.
|
|
7. |
- Zhou, Ke, et al.
(författare)
-
Molecular Orientation of Polymer Acceptor Dominates Open-Circuit Voltage Losses in All-Polymer Solar Cells
- 2019
-
Ingår i: ACS Energy Letters. - : AMER CHEMICAL SOC. - 2380-8195. ; 4:5, s. 1057-1064
-
Tidskriftsartikel (refereegranskat)abstract
- Low open-circuit voltage (V-oc) induced by energy loss in organic solar cells is considered to be one of the most influencing factors limiting device performance, in which morphology of the active layer plays a crucial role in determining energy loss. By employing a bilayer structure of the P3HT:N2200 all-polymer system, we have identified the isolated impact of a molecular packing structure on device V-oc with analysis of energy loss processes. Thermal annealing and various solvents were used to control molecular orientation in P3HT:N2200 bilayer devices, in which different V-oc spanning from 0.45 to 0.54 V could be obtained. It was found that energy of charge-transfer state (E-ct) differed in these bilayer devices. Besides, increased charge recombination could be observed in bilayer devices when N2200 layers exhibited face-on orientation, which caused an additional energy loss and decreased V-oc. Our results suggest that rational control of polymer molecular orientation is essential to reduce the energy loss and ultimately achieve high V-oc in all-polymer solar cells.
|
|