| 1. |
- Ablikim, M., et al.
(författare)
-
Measurements of (XcJ)-> K+K-K+K- decays
- 2006
-
Ingår i: Physics Letters B. - : Elsevier BV. - 0370-2693 .- 1873-2445. ; 642:3, s. 197-202
-
Tidskriftsartikel (refereegranskat)abstract
- Using 14M psi(2S) events taken with the BESII detector, chi(cJ) -> 2(K+K-) decays are studied. For the four-kaon final state, the branching fractions are B(chi(c0,1,2) ->.2(K+K-)) = (3.48 +/- 0.23 +/- 0.47) x 10(-3), (0.70 +/- 0.13 +/- 0.10) x 10(-3), and (2.17 +/- 0.20 +/- 0.31) x 10(-3). For the phi K+K- final state, the branching fractions, which are measured for the first time, are B(chi(c0,1,2) -> phi K+K-) = (1.03 +/- 0.22 +/- 0.15) x 10(-3), (0.46 +/- 0.16 +/- 0.06) x 10(-3), and (1.67 +/- 0.26 +/- 0.24) x 10(-4). For the phi phi final state, B(chi(c0,2) -> phi phi) = (0.94 +/- 0.21 +/- 0.13) x 10(-3) and (1.70 +/- 0.30 +/- 0.25) x 10(-3).
|
|
| 2. |
- Schael, S, et al.
(författare)
-
Precision electroweak measurements on the Z resonance
- 2006
-
Ingår i: Physics Reports. - : Elsevier BV. - 0370-1573 .- 1873-6270. ; 427:5-6, s. 257-454
-
Forskningsöversikt (refereegranskat)abstract
- We report on the final electroweak measurements performed with data taken at the Z resonance by the experiments operating at the electron-positron colliders SLC and LEP. The data consist of 17 million Z decays accumulated by the ALEPH, DELPHI, L3 and OPAL experiments at LEP, and 600 thousand Z decays by the SLID experiment using a polarised beam at SLC. The measurements include cross-sections, forward-backward asymmetries and polarised asymmetries. The mass and width of the Z boson, m(Z) and Gamma(Z), and its couplings to fermions, for example the p parameter and the effective electroweak mixing angle for leptons, are precisely measured: m(Z) = 91.1875 +/- 0.0021 GeV, Gamma(Z) = 2.4952 +/- 0.0023 GeV, rho(l) = 1.0050 +/- 0.0010, sin(2)theta(eff)(lept) = 0.23153 +/- 0.00016. The number of light neutrino species is determined to be 2.9840 +/- 0.0082, in agreement with the three observed generations of fundamental fermions. The results are compared to the predictions of the Standard Model (SM). At the Z-pole, electroweak radiative corrections beyond the running of the QED and QCD coupling constants are observed with a significance of five standard deviations, and in agreement with the Standard Model. Of the many Z-pole measurements, the forward-backward asymmetry in b-quark production shows the largest difference with respect to its SM expectation, at the level of 2.8 standard deviations. Through radiative corrections evaluated in the framework of the Standard Model, the Z-pole data are also used to predict the mass of the top quark, m(t) = 173(+10)(+13) GeV, and the mass of the W boson, m(W) = 80.363 +/- 0.032 GeV. These indirect constraints are compared to the direct measurements, providing a stringent test of the SM. Using in addition the direct measurements of m(t) and m(W), the mass of the as yet unobserved SM Higgs boson is predicted with a relative uncertainty of about 50% and found to be less than 285 GeV at 95% confidence level. (c) 2006 Elsevier B.V. All rights reserved.
|
|
| 3. |
- Aamodt, K., et al.
(författare)
-
The ALICE experiment at the CERN LHC
- 2008
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 3:S08002
-
Forskningsöversikt (refereegranskat)abstract
- ALICE (A Large Ion Collider Experiment) is a general-purpose, heavy-ion detector at the CERN LHC which focuses on QCD, the strong-interaction sector of the Standard Model. It is designed to address the physics of strongly interacting matter and the quark-gluon plasma at extreme values of energy density and temperature in nucleus-nucleus collisions. Besides running with Pb ions, the physics programme includes collisions with lighter ions, lower energy running and dedicated proton-nucleus runs. ALICE will also take data with proton beams at the top LHC energy to collect reference data for the heavy-ion programme and to address several QCD topics for which ALICE is complementary to the other LHC detectors. The ALICE detector has been built by a collaboration including currently over 1000 physicists and engineers from 105 Institutes in 30 countries, Its overall dimensions are 16 x 16 x 26 m(3) with a total weight of approximately 10 000 t. The experiment consists of 18 different detector systems each with its own specific technology choice and design constraints, driven both by the physics requirements and the experimental conditions expected at LHC. The most stringent design constraint is to cope with the extreme particle multiplicity anticipated in central Pb-Pb collisions. The different subsystems were optimized to provide high-momentum resolution as well as excellent Particle Identification (PID) over a broad range in momentum, up to the highest multiplicities predicted for LHC. This will allow for comprehensive studies of hadrons, electrons, muons, and photons produced in the collision of heavy nuclei. Most detector systems are scheduled to be installed and ready for data taking by mid-2008 when the LHC is scheduled to start operation, with the exception of parts of the Photon Spectrometer (PHOS), Transition Radiation Detector (TRD) and Electro Magnetic Calorimeter (EMCal). These detectors will be completed for the high-luminosity ion run expected in 2010. This paper describes in detail the detector components as installed for the first data taking in the summer of 2008.
|
|
| 4. |
- Abazov, V. M., et al.
(författare)
-
The upgraded DO detector
- 2006
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 565:2, s. 463-537
-
Tidskriftsartikel (refereegranskat)abstract
- The DO experiment enjoyed a very successful data-collection run at the Fermilab Tevatron collider between 1992 and 1996. Since then, the detector has been upgraded to take advantage of improvements to the Tevatron and to enhance its physics capabilities. We describe the new elements of the detector, including the silicon microstrip tracker, central fiber tracker, solenoidal magnet, preshower detectors, forward muon detector, and forward proton detector. The uranium/liquid -argon calorimeters and central muon detector, remaining from Run 1, are discussed briefly. We also present the associated electronics, triggering, and data acquisition systems, along with the design and implementation of software specific to DO.
|
|
| 5. |
- An, W. W., et al.
(författare)
-
Synthesis and surface characteristics of CeTbO3+delta induced by femtosecond laser irradiation
- 2007
-
Ingår i: Applied Surface Science. - : Elsevier BV. - 1873-5584 .- 0169-4332. ; 253:8, s. 3884-3887
-
Tidskriftsartikel (refereegranskat)abstract
- This work describes the use of focused, high-intensity light from a Ti: sapphire laser that generates femtosecond pulses to irradiate mixture of CeO2 and Tb4O7 under ambient conditions. The prepared samples were investigated by means of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electron microscope (SEM). XRD and XPS measurement results demonstrated that solid solution CeTbO3+delta with cubic fluorite structure has been synthesized on the irradiated target surface. SEM micrographs showed that the ultra-short laser irradiation resulted in the formation of foamy structure and spherical particles with size varying from about 30 to 200 nm. The formation mechanism has been discussed in detail. (c) 2006 Elsevier B.V. All rights reserved.
|
|
| 6. |
- Lu, Y., et al.
(författare)
-
Leakage current effects on C-V plots of high-k metal-oxide-semiconductor capacitors
- 2009
-
Ingår i: Journal of Vacuum Science & Technology B. - : American Vacuum Society. - 1071-1023 .- 1520-8567 .- 2166-2754 .- 2166-2746. ; 27:1, s. 352-355
-
Tidskriftsartikel (refereegranskat)abstract
- With the employment of ultrathin, high dielectric constant gate materials in advanced semiconductor technology, the conventional capacitance-voltage measurement technique exhibits a series of anomalies. In particular, a nonsaturating increase in the accumulation capacitance with reducing measurement frequency is frequently observed, which has not been adequately explained to our knowledge. In this article, the authors provide an explanation for this anomaly and hence set a criterion for the lower bound on measurement frequency. We then present a model which allows the easy extraction of the required parameters and apply it to an experimental set of data.
|
|
| 7. |
- Lu, Z. Y., et al.
(författare)
-
Mathematical modelling for the contention-collision elimination access mode of the IVth system model to a multiple star LAN
- 2006
-
Ingår i: Applied Mathematical Modelling. - : Elsevier BV. - 0307-904X. ; 30:4, s. 367-385
-
Tidskriftsartikel (refereegranskat)abstract
- The contention-collision elimination access mode is a new kind of access mode in star LAN. It can be divided into six different models according to the working principle. The mathematical analysis and performance evaluations for the Ist, IInd, IIIrd and Vth models have been presented in our previous papers. The performance evaluation for the IVth model is discussed in this paper by calculating several important parameters in steady-state i.e. the customer's transfer probability Pij, the mean number of customers M̄, and the mean waiting time W̄. Performance comparisons between the IVth model and the IInd model are also presented.
|
|
| 8. |
- Chen, H., et al.
(författare)
-
The distribution of grating-coupled field of quantum well infrared photodetector using FDTD method
- 2007
-
Ingår i: Infrared Materials, Devices, and Applications. - : SPIE - International Society for Optical Engineering. - 9780819470102 ; , s. 68351E-
-
Konferensbidrag (refereegranskat)abstract
- For most commonly used GaAs/AlGaAs n-type quantum well infrared photodetectors (QWIPs), the normal incident absorption is not possible because of the transition rule. The optical grating is required to achieve high absorption quantum efficiencies. When some gratings are patterned on the metal plate, the polarization direction can be changed greatly because of the diffraction effect. Finite difference time domain (FDTD) method has been used to investigate the effect of a reflection metal grating on the couple efficiency previously. However, the authors only take one metal grating and apply periodic boundary condition along the grating direction due to the computation limit. For a real QWIP system, such simulation is crude. In this work we consider a real GaAs/AlGaAs QWIP with a wavelength response around 15um and use FDTD method to investigate the effect of a reflection metal grating on the electric field pattern and the couple efficiency. The simulating results show that the electric field pattern is not periodic for every metal grating in a real QWIP system. We have also studied the influence of the substrate thickness and the grating period on the electric field pattern and the couple efficiency. These results offer a guideline for the design of QWIP.
|
|
| 9. |
- Chen, K., et al.
(författare)
-
Ti deficiency effect on the dielectric response of CaCu3Ti4O12 ceramics
- 2007
-
Ingår i: Solid State Communications. - : Elsevier. - 0038-1098 .- 1879-2766. ; 141:8, s. 440-444
-
Tidskriftsartikel (refereegranskat)abstract
- Single phase ceramics CaCu3Ti4.0O12 and CaCu3Ti3.9O12 have been prepared using the traditional solid-state reaction method. Compared with the stoichiometric ceramics CaCu3Ti4.0O12, Ti-deficient ceramics CaCu3Ti3.9O12 have the larger lattice parameter, the higher force constant, and smaller dielectric constant and the lower dissipation factor, although their fundamental characters of dielectric response are similar. Their characteristic relaxation frequencies are not well fitted with the Arrhenius Law but a tentatively supposed relation. With the Cole-Cole Law, the fitted broadened factors of dissipation peaks are 0.5433 and 0.8651 for CaCu3Ti3.9O12 and CaCu3Ti4.0O12, respectively. All facts mentioned above imply that mutually correlated motion of Ti ions or defects may be expected to be responsible for the giant dielectric constant and high dissipation factor of CaCu3T4.0O12. (c) 2006 Elsevier Ltd. All rights reserved.
|
|
| 10. |
- Han, Y., et al.
(författare)
-
Critical Thickness and Radius for Axial Heterostructure Nanowires Using Finite Element Method
- 2009
-
Ingår i: Nano Letters. - : American Chemical Society (ACS). - 1530-6992 .- 1530-6984. ; 9:5, s. 1921-1925
-
Tidskriftsartikel (refereegranskat)abstract
- Finite-element methods are used to simulate a heterostructured nanowire grown on a compliant mesa substrate. The critical thickness is calculated based on the overall energy balance approach. The strain field created by the first pair of misfit dislocations, which offsets the initial coherent strain field, is simulated. The local residual strain is used to calculate the total residual strain energy. The three-dimensional model shows that there exists a radius-dependent critical thickness below which no misfit dislocations could be generated. Moreover, this critical thickness becomes infinity for a radius less than some critical values. The simulated results are in good agreement with the experimental data. The critical radius from this work is smaller than that obtained from previous models that omit the interaction between the initial coherent strain field and the dislocation-induced strain field.
|
|
