1. |
- Moberg, Christina, et al.
(författare)
-
De unga gör helt rätt när de stämmer staten
- 2022
-
Ingår i: Aftonbladet. - 1103-9000.
-
Tidskriftsartikel (populärvet., debatt m.m.)abstract
- 1 620 forskare och lärare i forskarvärlden: Vi ställer oss bakom Auroras klimatkrav
|
|
2. |
- Analatos, Apostolos, et al.
(författare)
-
Clinical Outcomes of a Laparoscopic Total vs a 270 degrees Posterior Partial Fundoplication in Chronic Gastroesophageal Reflux Disease : A Randomized Clinical Trial
- 2022
-
Ingår i: JAMA Surgery. - : American Medical Association (AMA). - 2168-6254 .- 2168-6262. ; 157:6, s. 473-480
-
Tidskriftsartikel (refereegranskat)abstract
- Importance The efficacy of fundoplication operations in the management of gastroesophageal reflux disease (GERD) has been documented. However, few prospective, controlled series report long-term (>10 years) efficacy and postfundoplication concerns, particularly when comparing various types of fundoplication.Objective To compare long-term (>15 years) results regarding mechanical complications, reflux control, and quality of life between patients undergoing posterior partial fundoplication (PF) or total fundoplication (TF) (270 degrees vs 360 degrees) in surgical treatment for GERD.Design, setting and participants A double-blind randomized clinical trial was performed at a single center (Ersta Hospital, Stockholm, Sweden) from November 19, 2001, to January 24, 2006. A total of 456 patients were recruited and randomized. Data for this analysis were collected from August 1, 2019, to January 31, 2021.Interventions Laparoscopic 270 degrees posterior PF vs 360 degrees TF.Main Outcomes and Measures The main outcome was dysphagia scores for solid and liquid food items after more than 15 years. Generic (36-Item Short-Form Health Survey) and disease-specific (Gastrointestinal Symptom Rating Scale) quality of life and proton pump inhibitor consumption were also assessed.Results Among 407 available patients, relevant data were obtained from 310 (response rate, 76%; mean [SD] age, 66 [11.2] years; 184 [59%] men). A total of 159 were allocated to a PF and 151 to a TF. The mean (SD) follow-up time was 16 (1.3) years. At 15 years after surgery, mean (SD) dysphagia scores were low for both liquids (PF, 1.2 [0.5]; TF, 1.2 [0.5]; P = .58) and solids (PF, 1.3 [0.6]; TF, 1.3 [0.5]; P = .97), without statistically significant differences between the groups. Reflux symptoms were equally well controlled by the 2 types of fundoplications as were the improvements of quality-of-life scores.Conclusions and Relevance The long-term findings of this randomized clinical trial indicate that PF and TF are equally effective for controlling GERD and quality of life in the long term. Although PF was superior in the first years after surgery in terms of less dysphagia recorded, this difference did not prevail when assessed a decade later.
|
|
3. |
- Analatos, Apostolos, et al.
(författare)
-
Hiatal Hernia Repair With Tension-Free Mesh or Crural Sutures Alone in Antireflux Surgery A 13-Year Follow-Up of a Randomized Clinical Trial
- 2024
-
Ingår i: JAMA Surgery. - : American Medical Association (AMA). - 2168-6254 .- 2168-6262. ; 159:1, s. 11-18
-
Tidskriftsartikel (refereegranskat)abstract
- Importance Antireflux surgery is an effective treatment of gastroesophageal reflux disease (GERD), but the durability of concomitant hiatal hernia repair remains challenging. Previous research reported that the use of a mesh-reinforced, tension-free technique was associated with more dysphagia for solid foods after 3 years without reducing hiatal hernia recurrence rates compared with crural sutures alone, but the long-term effects of this technique have not been assessed.Objective To assess the long-term anatomical and functional outcomes of using a mesh for hiatal hernia repair in patients with GERD.Design, Setting, and Participants A double-blind, randomized clinical trial was performed at a single center (Ersta Hospital, Stockholm, Sweden) from January 11, 2006, to December 1, 2010. A total of 159 patients were recruited and randomly assigned. Data for the current analysis were collected from September 1, 2021, to March 31, 2022. All analyses were conducted with the intention-to-treat population.Interventions Closure of the diaphragmatic hiatus with crural sutures alone vs a tension-free technique using a nonabsorbable polytetrafluoroethylene mesh (Bard CruraSoft).Main Outcomes and Measures The primary outcome was radiologically verified recurrent hiatal hernia after more than 10 years. Secondary outcomes were dysphagia scores (ranging from 1 to 4, with 1 indicating no episodes of dysphagia and 4 indicating more than 3 episodes of dysphagia per day) for solid and liquid foods, generic 36-Item Short Form Health Survey and disease-specific Gastrointestinal Symptom Rating Scale symptom assessment scores, proton pump inhibitor consumption, and reoperation rates. Intergroup comparisons of parametric data were performed using t tests; for nonparametric data, Mann-Whitney U, chi(2), or Fisher exact tests were used. For intragroup comparisons vs the baseline at follow-up times, the Friedman test was used, and post hoc analysis was performed using Wilcoxon matched pairs.Results Of 145 available patients, follow-up data were obtained from 103 (response rate 71%; mean [SD] age at follow-up, 65 [11.3] years; 55 [53%] female), with 53 initially randomly assigned to mesh reinforcement, and 50 to crural suture alone. The mean (SD) follow-up time was 13 (1.1) years. The verified radiologic hiatal hernia recurrence rates were 11 of 29 (38%) in the mesh group vs 11 of 35 (31%) in the suture group (P = .61). However, 13 years postoperatively, mean (SD) dysphagia scores for solids remained significantly higher in the mesh group (mean [SD], 1.9 [0.7] vs 1.6 [0.9]; P = .01).Conclusions and Relevance Findings from this long-term follow-up of a randomized clinical trial suggest that tension-free crural repair with nonabsorbable mesh does not reduce the incidence of hiatal hernia recurrence 13 years postoperatively. This finding combined with maintained higher dysphagia scores does not support the routine use of tension-free polytetrafluoroethylene mesh closure in laparoscopic hiatal hernia repair for treatment of GERD.Trial Registration ClinicalTrials.gov Identifier: NCT05069493
|
|
4. |
- Analatos, Apostolos, et al.
(författare)
-
Total versus partial posterior fundoplication in the surgical repair of para-oesophageal hernias : randomized clinical trial
- 2022
-
Ingår i: BJS Open. - : Oxford University Press (OUP). - 2474-9842. ; 6:3
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Fundoplication is an essential step in para-oesophageal hernia (POH) repair, but which type minimizes postoperative mechanical complications is controversial.Methods: This was a randomized, double-blind clinical trial conducted between May 2009 and October 2018. Patients with symptomatic POH were allocated to either a total (Nissen) or a posterior partial (Toupet) fundoplication after hernia reduction and crural repair. The primary outcome was dysphagia (Ogilvie dysphagia scores) at 6 months postoperatively. Secondary outcomes were peri- and postoperative complications, swallowing difficulties assessed by the Dakkak dysphagia score, gastro-oesophageal reflux, quality of life (QoL), and radiologically confirmed hernia recurrence.Results: A total of 70 patients were randomized to a Nissen (n = 32) or a Toupet (n = 38) fundoplication. Compared with baseline, Ogilvie dysphagia scores were stable at the 3- and 6-month follow-up in the Nissen group (P = 0.075 and 0.084 respectively) but significantly improved in the Toupet group (from baseline mean (s.d.): 1.4 (1.1) to 0.5 (0.8) at 3 months, and 0.5 (0.6) at 6 months; P= 0.003 and P = 0.001 respectively). At 6 months, Dakkak dysphagia scores were significantly higher in the Nissen group than in the Toupet group (mean (s.d.): 10.4 (7.9) versus 5.1(7.2); P = 0.003). QoL scores improved throughout the follow-up. However, at 3 and 6 months postoperatively, the absolute median improvement (A) from preoperative values in the mental component scores of the Short Form-36 QoL questionnaire was significantly higher in the Toupet group (median (i.q.r.): 7.1 (-0.6 to 15.2) versus 1.0 (-5.4 to 3.3) at 3 months, and 11.2 (1.4 to 18.3) versus 0.4 (-9.4 to 7.5) at 6 months; (P =0.010 and 0.003 respectively)). At 6 months, radiologically confirmed POH recurrence occurred in 11 of 24 patients (46 per cent) of the Nissen group and in 15 of 32 patients (47 per cent) of the Toupet group (P = 1.001).Conclusions: A partial posterior wrap (Toupet fundoplication) showed reduced obstructive complications and improved QoL compared with a total (Nissen) fundoplication following POH repair.
|
|
5. |
- Butler, Simon, et al.
(författare)
-
An Exploration of Openness in Hardware and Software Through Implementation of a RISC-V Based Desktop Computer
- 2022
-
Ingår i: OpenSym '22. - New York, NY, USA : Association for Computing Machinery (ACM). - 9781450398459 - 9781450398466
-
Konferensbidrag (refereegranskat)abstract
- Open hardware and open source software platforms bring benefits to both implementers and users in the form of system adaptability and maintainability, and through the avoidance of lock-in, for example. Development of the \riscv\ Instruction Set Architecture and processors during the last ten years has made the implementation of a desktop computer using open hardware, including open processors, and open source software an approaching possibility. We use the SiFive Unmatched development board and Ubuntu Linux, and the recorded experiences of system builders using the Unmatched board to explore the extent to which it is possible to create an open desktop computer. The work identifies current limitations to implementing an open computer system, which lie mainly at the interface between the operating system and hardware components. Potential solutions to the challenges uncovered are proposed, including greater consideration of openness during the early stages of product design. A further contribution is made by an account of the synergies arising from open collaboration in a private-collective innovation process.
|
|
6. |
- Butler, Simon, et al.
(författare)
-
Considerations and challenges for the adoption of open source components in software-intensive businesses
- 2022
-
Ingår i: Journal of Systems and Software. - : Elsevier. - 0164-1212 .- 1873-1228. ; 186
-
Tidskriftsartikel (refereegranskat)abstract
- Component-Based Software Development is a conventional way of working for software-intensive businesses and OpenSource Software (OSS) components are frequently considered by businesses for adoption and inclusion in softwareproducts. Previous research has found a variety of practices used to support the adoption of OSS components, in-cluding formally specified processes and less formal, developer-led approaches, and that the practices used continue todevelop. Evolutionary pressures identified include the proliferation of available OSS components and increases in thepace of software development as businesses move towards continuous integration and delivery. We investigate workpractices used in six software-intensive businesses in the primary and secondary software sectors to understand currentapproaches to OSS component adoption and the challenges businesses face establishing effective work practices to eval-uate OSS components. We find businesses have established processes for evaluating OSS components and communitiesthat support more complex and nuanced considerations of the cost and risks of component adoption alongside matterssuch as licence compliance and functional requirements. We also found that the increasing pace and volume of softwaredevelopment within some businesses provides pressure to continue to evolve software evaluation processes.
|
|
7. |
- Butler, Simon, et al.
(författare)
-
Maintaining interoperability in open source software : A case study of the Apache PDFBox project
- 2020
-
Ingår i: Journal of Systems and Software. - : Elsevier. - 0164-1212 .- 1873-1228. ; 159
-
Tidskriftsartikel (refereegranskat)abstract
- Software interoperability is commonly achieved through the implementation of standards for communication protocols or data representation formats. Standards documents are often complex, difficult to interpret, and may contain errors and inconsistencies, which can lead to differing interpretations and implementations that inhibit interoperability. Through a case study of two years of activity in the Apache PDFBox project we examine day-to-day decisions made concerning implementation of the PDF specifications and standards in a community open source software (OSS) project. Thematic analysis is used to identify semantic themes describing the context of observed decisions concerning interoperability. Fundamental decision types are identified including emulation of the behaviour of dominant implementations and the extent to which to implement the PDF standards. Many factors influencing the decisions are related to the sustainability of the project itself, while other influences result from decisions made by external actors, including the developers of dependencies of PDFBox. This article contributes a fine grained perspective of decision-making about software interoperability by contributors to a community OSS project. The study identifies how decisions made support the continuing technical relevance of the software, and factors that motivate and constrain project activity.
|
|
8. |
- Butler, Simon, et al.
(författare)
-
On business adoption and use of reproducible builds for open and closed source software
- 2023
-
Ingår i: Software quality journal. - : Springer Nature Switzerland AG. - 0963-9314 .- 1573-1367. ; 31:3, s. 687-719
-
Tidskriftsartikel (refereegranskat)abstract
- Reproducible builds (R-Bs) are software engineering practices that reliably create bit-for-bit identical binary executable files from specified source code. R-Bs are applied in someopen source software (OSS) projects and distributions to allow verification that the distrib-uted binary has been built from the released source code. The use of R-Bs has been advo-cated in software maintenance and R-Bs are applied in the development of some OSS secu-rity applications. Nonetheless, industry application of R-Bs appears limited, and we seekto understand whether awareness is low or if significant technical and business reasonsprevent wider adoption. Through interviews with software practitioners and business man-agers, this study explores the utility of applying R-Bs in businesses in the primary and sec-ondary software sectors and the business and technical reasons supporting their adoption.We find businesses use R-Bs in the safety-critical and security domains, and R-Bs are valu-able for traceability and support collaborative software development. We also found thatR-Bs are valued as engineering processes and are seen as a badge of software quality, butwithout a tangible value proposition. There are good engineering reasons to use R-Bs inindustrial software development, and the principle of establishing correspondence betweensource code and binary offers opportunities for the development of further applications.
|
|
9. |
- Butler, Simon, et al.
(författare)
-
On Company Contributions to Community Open Source Software Projects
- 2021
-
Ingår i: IEEE Transactions on Software Engineering. - : Institute of Electrical and Electronics Engineers (IEEE). - 0098-5589 .- 1939-3520. ; 47:7, s. 1381-1401
-
Tidskriftsartikel (refereegranskat)abstract
- The majority of contributions to community open source software (OSS) projects are made by practitioners acting on behalf of companies and other organisations. Previous research has addressed the motivations of both individuals and companies to engage with OSS projects. However, limited research has been undertaken that examines and explains the practical mechanisms or work practices used by companies and their developers to pursue their commercial and technical objectives when engaging with OSS projects. This research investigates the variety of work practices used in public communication channels by company contributors to engage with and contribute to eight community OSS projects. Through interviews with contributors to the eight projects we draw on their experiences and insights to explore the motivations to use particular methods of contribution. We find that companies utilise work practices for contributing to community projects which are congruent with the circumstances and their capabilities that support their short- and long-term needs. We also find that companies contribute to community OSS projects in ways that may not always be apparent from public sources, such as employing core project developers, making donations, and joining project steering committees in order to advance strategic interests. The factors influencing contributor work practices can be complex and are often dynamic arising from considerations such as company and project structure, as well as technical concerns and commercial strategies. The business context in which software created by the OSS project is deployed is also found to influence contributor work practices.
|
|
10. |
- Gamalielsson, Jonas, et al.
(författare)
-
On availability of Open Source Software reference implementations for standards issued by different standards setting organisations
- 2023
-
Ingår i: Joint Proceedings EURAS & SIIT 2023. - Aachen : Verlag Mainz. - 9783958864917 - 3958864910 ; , s. 97-116
-
Konferensbidrag (refereegranskat)abstract
- Software reference implementations of ICT standards have an important role for verifying that a standard is implementable, supporting interoperability testing among other implementations, and providing feedback to the standard development process. Providing reference implementations and widely used implementations of a standard as Open Source Software also promotes wide deployment in software systems, avoidance of different lock-in effects, interoperability, and longevity of systems and associated digital assets. In this paper results are reported on the availability of reference implementations and widely deployed implementations provided as Open Source Software for standards issued by different standards setting organisations. Specifically, findings draw from observations and analyses related to software implementations for identified standards issued by ETSI, IEC, IEEE, IETF, ISO, ITU-T, OASIS, and W3C.
|
|