| 1. |
- Krupanek, Janusz, et al.
(författare)
-
Sectoral Guidance for Chemicals Management in the Surface treatment of metals and plastics Industry : HAZBREF-project Activity 4.1 report
- 2021
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- BackgroundThe main instrument on EU level to control industrial releases is the Industrial Emissions Directive (IED), particularly through the publication of BAT reference documents (BREFs) and related BAT Conclusions, which is the reference for setting the permit conditions throughout EU for IED installations. However, the BREFs published so far do not contain adequate information on specific hazardous chemicals used and released from industry which makes the control difficult for the industry and the permitting and supervising authorities.One of the case sectors in the HAZBREF project is the surface treatment of metals and plastics (STM). This sector was chosen due to the use of chemicals, potential emissions, the wide range of products as well as technological processes and the upcoming STM BREF review. The other HAZBREF case sectors are textile industry and chemical industry which are addressed in separate reports.The lack of knowledge on the use and flow of specific hazardous chemicals in the industrial processes makes chemical control and reduction measures difficult. The problem is that often neither plant operators nor authorities know which substances are relevant to be treated and which handling measures are needed. Surface treatment of metals and plastics is covered by the STM BREF document, published in 2006. According to the last work programme of the EIPPCB the review of the EU STM BREF is planned to start in 2021.Purpose of the documentThis sectoral guidance contains information on uses of hazardous chemicals, the best practices in chemical management and recommendations on enhancing the permitting process in the STM sector. This document sums up the findings from HAZBREF project and is based on industrial case studies, interviews with authorities and expert judgment. The aim is to describe good practices in chemical management to be utilized by STM installations as well as environmental and chemical authorities. These include technical, organisational and management aspects and concrete tools supporting chemical management.The report addresses the STM sector as a whole in Europe, although the main part of the findings is generated from HAZBREF case installation and other experiences in the Baltic Sea Region. The document provides also general descriptions of BAT proposals related to management of hazardous chemicals and substances. These findings of the guidance will feed into in the forthcoming revision of the STM BREF. They are also to be used for HELCOM recommendations on how to reduce the discharge of hazardous substances into the Baltic Sea.Moreover, the document provides an overview of applicable legal requirements, procedures and other obligations of installation operators regarding use of chemicals and releases of hazardous substances. This includes guidance for tools to identify and assess relevant hazardous substances used and released from the STM installations.Main findings and proposalsImprovement of chemical management systemA Chemical Management System provides a systematic way of managing chemicals through the whole process on the site. Most of the companies have implemented quality management standards such as ISO 9000, ISO 14000, EMAS and integrated EHS programs which also address certain aspects of chemical management. The quality of chemical management systems in the companies differs depending on the scale of operation, ownership and awareness. Integration of good practices of chemical management within already implemented management systems strengthens the ability to reduce environmental risks. HAZBREF project strongly recommends the establishment and regular use of a chemical management system at IED installations.Development of a chemical inventoryThe establishment and maintenance of a chemical inventory is an importantprerequisite for effective and responsible chemicals management in the STMsector. All chemicals and raw materials along with information on their propertiesused in all processes and activities at the site should be listed in a database. Such adatabase is a key part of chemical management allowing for systematic riskassessment, management of chemicals flows and their storage. The information in the chemical list/database must be searchable and should be updated regularly. Most of the information needed is available in the safety datasheets (SDS). If some information is missing from the SDS, the supplier should be asked to provide this. Good routines to handle new and updated SDSs are crucial to have an up to date and reliable chemical database. These routines should involve on-site handling and updates as well as communication with suppliers on how SDSs are delivered. Well-managed chemical inventories can significantly simplify the environmental permit application process both for the operators and the permitting authorities.Better use of Chemical Management Tools and training of stafNumerous references and tools are available to support STM companies and competent authorities in implementing the good chemical management required in the IED. HAZBREF recommends that operators use proper tools for risk assessment and evaluation of the efficiency of chemical management.Use and improvement of risk assessment tools such as extended SDS and material flow analysis should be promoted among installation operators in this respect. The HAZBREF project has developed a comprehensive tool that helps the operators to identify the site-specific hazardous substances that should be considered in strategic and operational decisions.Awareness raising and training of staff in the use of chemical management tools and systems is crucial for implementation of good chemical management practices at the installations.SubstitutionA regular check aiming at identifying potentially new available and safer alternatives to the hazardous chemicals used is an important measure to minimise chemical risks at the installation. A successful substitution work can be performed in four stages: - Identification of hazardous substances - Screening for possible alternatives - Evaluation and choice of alternatives and Development of new alternatives.Substitution can be aimed for any hazardous chemical used at installation level where it is needed in order to protect environment or human health. However, regrettable substitution (i.e. move to use new chemical that is equally or more hazardous than the substituted chemical or results in cross-media effects) must be avoided.Assessment and improvement of SDSEfficient chemicals management requires high quality of the Safety Data Sheets (SDS). The SDS should sufficiently describe the chemical properties and include information about exposure (including use and emissions), eco-toxicology and proper storage and handling. A SDS must also contain information on whether the chemical product contains substances on the SVHC list, priority substances under the Water Framework Directive WFD and the POPs convention. In case a chemical supplier fails to provide a SDS of sufficient quality, it is the duty of both the operator and the competent authority to demand the missing information. This is already required by law in some countries, e.g. Germany. It is also important that the operators know how to extract and consolidate the relevant information from the SDS to their permit applications and verify the quality of different information sources.The development of an extended SDS including exposure scenarios and improved data on environmental effects would facilitate better risk assessment of individual chemicals used in specific processes. This would lead to more efficient monitoring and help focusing on substances of concern. Improved SDSs for raw materials with information on impurities or additives would facilitate more complete chemical inventories.Continuous improvement of BAT implementation The implementation of BAT needs to be continuously monitored and improved at the installation considering site specific technological, economical and environmental aspects. The findings from Polish HAZBREF case studies is that fulfilment of BAT requirements can be challenging if all improvements need to be done in a short time period. For example, closed-loop systems are considered necessary additional process-integrated techniques that it is important to implementstep by step in the installations.Circular economyThe STM sector is a significant user of non-renewable resources (metals), and recycling of recovered metal containing materials such as metal substrates orelectrolytes back to the process is good practice. Such recovery processes are widely used for basic metals, such as zinc, copper and nickel, which are used as valuable secondary raw materials SRM. High costs of recovery processes and high energy consumption as well as the variety of chemicals and metals used in STM processes often hinders recycling. In cases where recycling is not feasible, pretreatment of contaminated waste water on site and subsequent off-site treatment of generated metal containing sludges is standard practice.Permitting processBeside best practices in chemical management, the project also elaborated recommendations on enhancing the permitting process in the STM sector. It can be concluded that the existing general structure and content of the permit application procedures are as such sufficient to deal with hazardous substances and chemicals. Nevertheless, in practice the permit process could be improved with more communication between the applicant and the permitting authority during the application phase. More co-operation between chemical, environmental and occupational health authorities is suggested to achieve a smooth information flow and reduce double work regarding requirements under different legislations concerning chemicals and hazardous substances. In some countries, for example in Finland, the supervising practices in different parts of a given country need harmonising s
|
|
| 2. |
- Glantz, Maria, et al.
(författare)
-
Impact of protease and lipase activities on quality of Swedish raw milk
- 2020
-
Ingår i: International Dairy Journal. - : Elsevier BV. - 0958-6946. ; 107
-
Tidskriftsartikel (refereegranskat)abstract
- An increasing demand for dairy products with long shelf-life is foreseen. A limiting factor for maintaining high quality of these products is the activity of spoilage enzymes during storage. Lipase and protease activities in Swedish raw milk at farm and dairy level were investigated, analysing milk samples from three geographical regions and two seasons. Lipase activity in milk at farm level was affected by regional and seasonal variations, whereas at dairy level only season had an effect. Lipase activity was positively correlated with ionic calcium. For protease activity, no effect of either region or season was seen. Degradation products, e.g., free fatty acids, peptides and plasmin proteolysis products, varied differently between season and geographical origin at both farm and dairy level. The results indicate that lipase and protease activities are important for raw milk quality, while ionic calcium might be a future indicator for milk fat stability.
|
|
| 3. |
- Jarnemo, Anders, et al.
(författare)
-
The proximity of rapeseed fields influences levels of forest damage by red deer
- 2022
-
Ingår i: Ecological Solutions and Evidence. - Chichester, West Sussex : Blackwell Publishing Ltd.. - 2688-8319. ; 3:2
-
Tidskriftsartikel (refereegranskat)abstract
- Deer can show transitional use between agricultural fields and forests for foraging and shelter. Such transitional use may affect forest damage as nutrient balancing theory suggests that if deer ingest large amounts of nutrient-rich food, complementary browse, such as bark, may be required to balance the diet. We investigated the relationship between the level of red deer Cervus elaphus bark-stripping damage in 68 Norway spruce Picea abies stands and the presence of rapeseed Brassica napus fields – an energy-rich crop preferred by red deer – in the surroundings, hypothesizing that damage increases with decreasing distance to rapeseed fields. We also considered other potentially influencing factors, such as supplemental feeding, alternative forage availability, and deer use of spruce stands as indexed by a pellet group count. Spruce stands closer to rapeseed had a significantly higher proportion of damaged stems. The increased level of bark-stripping damage was not explained by a higher stand use of deer closer to rapeseed fields, indicating that deer increase their consumption of bark in order to balance their diet. Similarly, spruce stands closer to supplemental feeding stations had significantly higher damage levels. In line with earlier findings, damage levels were negatively related to the amount of available browse in the forest. This emphasizes the importance of alternative forage for reducing the damage risk in forest plantations. Our study shows that the availability of fields with nutrient-rich food, such as rapeseed, as well as supplemental feeding needs to be considered when predicting the level of forest damage. With a high availability of nutrient-rich food in the vicinity of forest stands, a higher damage level can be expected and counteractions could be taken such as increased disturbance, harvest or changed choice of both crop and supplemental feed types. These actions may also be combined with a push–pull strategy where the deer are steered to disturbance-free zones insensitive to damage and with alternative forage. The importance of alternative forage availability on damage levels highlights the necessity for managers to actively promote tree and shrub forage within and around their production stands. © 2022 The Authors. Ecological Solutions and Evidence published by John Wiley & Sons Ltd on behalf of British Ecological Society.
|
|
| 4. |
- Johansson, Emil, et al.
(författare)
-
Hierarchical Clustering and Trajectory Analyses Reveal Viremia-Independent B-Cell Perturbations in HIV-2 Infection
- 2022
-
Ingår i: Cells. - : MDPI. - 2073-4409. ; 11:19
-
Tidskriftsartikel (refereegranskat)abstract
- Time to AIDS in HIV-2 infection is approximately twice as long compared to in HIV-1 infection. Despite reduced viremia, HIV-2-infected individuals display signs of chronic immune activation. In HIV-1-infected individuals, B-cell hyperactivation is driven by continuous antigen exposure. However, the contribution of viremia to B-cell perturbations in HIV-2-infected individuals remains largely unexplored. Here, we used polychromatic flow cytometry, consensus hierarchical clustering and pseudotime trajectory inference to characterize B-cells in HIV-1- or HIV-2-infected and in HIV seronegative individuals. We observed increased frequencies of clusters containing hyperactivated T-bethighCD95highCD27int and proliferating T-bet+CD95highCD27+CD71+ memory B-cells in viremic HIV-1 (p < 0.001 and p < 0.001, respectively), viremic HIV-2 (p < 0.001 and p = 0.014, respectively) and in treatment-naïve aviremic HIV-2 (p = 0.004 and p = 0.020, respectively)-infected individuals, compared to seronegative individuals. In contrast, these expansions were not observed in successfully treated HIV-1-infected individuals. Finally, pseudotime trajectory inference showed that T-bet-expressing hyperactivated and proliferating memory B-cell populations were located at the terminal end of two trajectories, in both HIV-1 and HIV-2 infections. As the treatment-naïve aviremic HIV-2-infected individuals, but not the successfully ART-treated HIV-1-infected individuals, showed B-cell perturbations, our data suggest that aviremic HIV-2-infected individuals would also benefit from antiretroviral treatment.
|
|
| 5. |
- Lee, Wai Tung, et al.
(författare)
-
Polarisation Development at the European Spallation Source
- 2023
-
Ingår i: EPJ Web of Conferences. - 2100-014X. ; 286, s. 03004-03004
-
Tidskriftsartikel (refereegranskat)abstract
- To meet the ever-increasing user demand, eleven of the fifteen European Spallation Source (ESS) instruments under construction aim to offer polarised neutrons for user experiments. They include an imaging instrument, a SANS instruments, two reflectometers, three diffractometers, and four spectrometers. In conjunction with in-kind contributions and instrumentation grants, the ESS Polarisation Project will support the incorporation of polarisation analysis on eight of the eleven instruments. The project aims to deliver polarised neutrons for first-science experiments as instruments enter operation. Different polariser and polarisation analyser techniques will be available to accommodate the specifics of experiments on a given instrument. Polarised 3He neutron spin filter using either Metastable Optical Pumping (MEOP) or Spin-Exchange Optical Pumping (SEOP) techniques will provide shared-use equipment among many instruments, with SEOP’s main application being in situ beam-polarisation. Several instruments will also use polarising-supermirror devices. To provide wide-bandwidth spin-flipping capability to the time-of-flight instruments, Adiabatic Fast Passage (AFP) neutron spin flippers, also known as gradient-field radiofrequency spin flippers will be the main method of choice. Devices based on the same AFP principle will also be used to flip 3He nuclear spins. We are constructing our first 3He polariser setup, including field coils to produce highly uniform magnetic field. Monte Carlo simulations are being done for the supermirror polarisers. To ensure science-focused development, we are working with university partners in doing scientific experiments with polarised neutrons. These are some of the activities developing polarisation analysis for ESS instruments in our project.
|
|
| 6. |
- Månsson, Johan, et al.
(författare)
-
Habitat and crop selection by red deer in two different landscape types
- 2021
-
Ingår i: Agriculture, Ecosystems & Environment. - Amsterdam : Elsevier. - 0167-8809 .- 1873-2305. ; 318
-
Tidskriftsartikel (refereegranskat)abstract
- Crop raiding ungulates can cause costly yield losses and conflicts between agriculture, game management, and conservation. It is therefore crucial to know how, where, and when ungulates use different habitats and crops. In this study we used resource selection functions and GPS-tagged red deer Cervus elaphus (n = 38) in two different study areas (North – mainly forested land and South – mainly arable land), to investigate how red deer use arable land and different crop types in relation to availability and distance to forest cover in Sweden. Our study shows a transitional use of arable land and forests by red deer. Red deer spend on average 45% and 21% of their time in arable land in South and North respectively. In the North, arable land was selected while forest and wetlands were selected in the South. The selection of different crops also differed between the two study areas, for example rapeseed was highly selected during both seasons in South while it was used to a lower degree in relation to its availability in the North. In both study areas the probability of red deer presence on the agricultural fields decreased with distance to forest. The significant use of arable land and unharvested crops by the increasing red deer population in Sweden highlights a risk for crop damage that may need further consideration for farming practices as well as for damage and wildlife management. In our case damage mitigation should focus on rapeseed in the South, whereas there is a less clear pattern of selection among growing crops in the North. The differences in habitat and crop selection between the two areas also highlights the need of knowledge about red deer habitat selection at a regional level to be able to adapt damage mitigation and wildlife management strategies accordingly. Moreover, the transitional use of arable land and forests by red deer in mixed landscapes may imply that consumption of certain crops can affect browsing patterns and damage levels within forests and vice versa, that may have implication for both agriculture and forestry and calls for future studies. © 2021
|
|
| 7. |
- Scharf, Lydia, et al.
(författare)
-
Inverted CD8 T-Cell Exhaustion and Co-Stimulation Marker Balance Differentiate Aviremic HIV-2-Infected From Seronegative Individuals
- 2021
-
Ingår i: Frontiers in Immunology. - : Frontiers Media SA. - 1664-3224. ; 12
-
Tidskriftsartikel (refereegranskat)abstract
- HIV-2 is less pathogenic compared to HIV-1. Still, disease progression may develop in aviremic HIV-2 infection, but the driving forces and mechanisms behind such development are unclear. Here, we aimed to reveal the immunophenotypic pattern associated with CD8 T-cell pathology in HIV-2 infection, in relation to viremia and markers of disease progression. The relationships between pathological differences of the CD8 T-cell memory population and viremia were analyzed in blood samples obtained from an occupational cohort in Guinea-Bissau, including HIV-2 viremic and aviremic individuals. For comparison, samples from HIV-1- or dually HIV-1/2-infected and seronegative individuals were obtained from the same cohort. CD8 T-cell exhaustion was evaluated by the combined expression patterns of activation, stimulatory and inhibitory immune checkpoint markers analyzed using multicolor flow cytometry and advanced bioinformatics. Unsupervised multidimensional clustering analysis identified a cluster of late differentiated CD8 T-cells expressing activation (CD38+, HLA-DRint/high), co-stimulatory (CD226+/-), and immune inhibitory (2B4+, PD-1high, TIGIThigh) markers that distinguished aviremic from viremic HIV-2, and treated from untreated HIV-1-infected individuals. This CD8 T-cell population displayed close correlations to CD4%, viremia, and plasma levels of IP-10, sCD14 and beta-2 microglobulin in HIV-2 infection. Detailed analysis revealed that aviremic HIV-2-infected individuals had higher frequencies of exhausted TIGIT+ CD8 T-cell populations lacking CD226, while reduced percentage of stimulation-receptive TIGIT-CD226+ CD8 T-cells, compared to seronegative individuals. Our results suggest that HIV-2 infection, independent of viremia, skews CD8 T-cells towards exhaustion and reduced co-stimulation readiness. Further knowledge on CD8 T-cell phenotypes might provide help in therapy monitoring and identification of immunotherapy targets.
|
|
| 8. |
- Widén, Anna, et al.
(författare)
-
Nutrient balancing or spring flush – What determines spruce bark stripping level by red deer?
- 2022
-
Ingår i: Forest Ecology and Management. - Amsterdam : Elsevier. - 0378-1127 .- 1872-7042. ; 520
-
Tidskriftsartikel (refereegranskat)abstract
- The distribution and population density of red deer (Cervus elaphus) are increasing in several regions of Europe. The deer may cause severe damage in commercial forestry and agriculture. Bark stripping is the main problem in forests, especially on Norway spruce (Picea abies), and is thought to mostly occur during winter when other forage is scarce. It has been suggested that an imbalance in the nutrient intake, and especially a diet including high amounts of easily-digestible macronutrients, such as agricultural crops, can lead to an increased urge to consume bark. Feeding on brassicas, for example rapeseed (Brassica napus) might have this effect. The aim with this study was to investigate the relationship between intake of rapeseed and bark stripping on Norway spruce by red deer during early spring. We did this by a controlled feeding experiment with four groups of captive red deer in southern Sweden. All groups were given spruce logs every week, while only two groups had access to freshly harvested rapeseed plants. In addition, influence of air temperature and forage nutritional composition was taken into account. Our results show that red deer bark stripping can be considerable not only during winter but also during spring green-up. We found no significant influence of rapeseed on bark stripping performed by the deer. However, at a threshold temperature, deer suddenly started to ingest large amounts of bark biomass, coinciding with a significant change in the bark's concentration of starch. We suggest that the lack of effect of rapeseed feeding can partly be explained by overshadowing effects caused by such seasonal changes of bark characteristics, and partly by the fact that the rapeseed plants in our study contained lower than expected concentrations of easily-digestible macronutrients (apart from protein). We conclude that the risk of damage on spruce can be especially high during certain periods, something that is important to consider when mitigating bark stripping. However, several interactive effects are involved and must be considered in order to more efficiently mitigate damage. © 2022 The Author(s)
|
|
