| 1. |
- Blanco, A., et al.
(författare)
-
Performance of timing resistive plate chambers with relativistic neutrons from 300 to 1500 MeV
- 2015
-
Ingår i: Journal of Instrumentation. - : IOP Publishing. - 1748-0221. ; 10:2
-
Tidskriftsartikel (refereegranskat)abstract
- A prototype composed of four resistive plate chamber layers has been exposed to quasi-monoenergetic neutrons produced from a deuteron beam of varying energy (300 to 1500 AMeV) in experiment S406 at GSI, Darmstad, Germany. Each layer, with an active area of about 2000 × 500 mm2, is made of modules containing the active gaps, all in multigap construction. Each gap is defined by 0.3 mm nylon mono-filaments positioned between 2.85 mm thick float glass electrodes. The modules are operated in avalanche mode with a non-flammable gas mixture composed of 90% C2H2F4 and 10% SF6. The signals are readout by a pick-up electrode formed by 15 copper strips (per layer), spaced at a pitch of 30 mm, connected at both sides to timing front end electronics. Measurements of the time of flight jitter of neutrons, in the mentioned energy range, point to a contribution of the resistive plate chamber in the order of 150 ps, independent of the neutron energy.
|
|
| 2. |
- Machado, J., et al.
(författare)
-
Performance of timing Resistive Plate Chambers with protons from 200 to 800 MeV
- 2015
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 10:1, s. C01043-
-
Tidskriftsartikel (refereegranskat)abstract
- A prototype composed of four resistive plate chamber layers has been exposed to quasi-monoenergetic protons produced from a deuteron beam of varying energy (200 to 800 AMeV) in experiment S406 at GSI, Darmstadt, Germany. The aim of the experiment is to characterize the response of the prototype to protons in this energy range, which deposit from 1.75 to 6 times more energy than minimum ionizing particles. Each layer, with an active area of about 2000 × 500 mm 2 , is made of modules containing the active gaps, all in multigap construction. Each gap is defined by 0.3 mm nylon mono-filaments positioned between 2.85 mm thick float glass electrodes. The modules are operated in avalanche mode with a non-flammable gas mixture composed of 90% C 2 H 2 F 4 and 10% SF 6 . The signals are readout by a pick-up electrode formed by 15 copper strips (per layer), spaced at a pitch of 30 mm, connected at both sides to timing front end electronics. Results show an uniform efficiency close to 100% along with a timing resolution of around 60 ps on the entire 2000 × 500 mm 2 area.
|
|
| 3. |
- Nacher, E., et al.
(författare)
-
Proton response of CEPA4: A novel LaBr3(Ce)-LaCl3(Ce) phoswich array for high-energy gamma and proton spectroscopy
- 2015
-
Ingår i: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. - : Elsevier BV. - 0168-9002. ; 769, s. 105-111
-
Tidskriftsartikel (refereegranskat)abstract
- A new phoswich array, for the detection of high-energy protons and gamma rays from nuclear reactions, has been built. This new detector consists of four individual closely packed scintillator detectors, each of them made of 4 cm of LaBr3(Ce) and G cm of LaCl3(Ce) in phoswich configuration (optically coupled and with a common readout). In this paper we report on the results of a beam test performed at the Bronowice Cyclotron Centre (CCB) in Krakow, showing the response of this versatile instrument to high energy protons (70-230 MeV). Furthermore, for the first time we prove that we can reconstruct the original energy of fast protons (E > 200 MeV) which pass through the total length of the crystal while still retaining a good energy resolution.
|
|
| 4. |
- Ribeiro, G., et al.
(författare)
-
An idea for the future proton detection of (p,2p) reactions with the (RB)-B-3 set-up at FAIR
- 2015
-
Ingår i: Journal of Physics: Conference Series. - : IOP Publishing. - 1742-6588 .- 1742-6596. ; 599:1, s. Art. no. 012034-
-
Konferensbidrag (refereegranskat)abstract
- The (RB)-B-3 Collaboration has a long experience in probing exotic nuclei via quasi-free scattering reactions. To continue these studies a new array capable of detecting protons and gamma rays of high energy is currently being developed, the CALIFA ((RB)-B-3 CALorimeter for In Flight gamma arrays and high energy charged pArticles). This contribution reports on the current solution for the forward Endcap of the CALIFA detector and on the latest test results.
|
|
