| 1. |
-
- 2019
-
Tidskriftsartikel (refereegranskat)
|
|
| 2. |
|
|
| 3. |
- Yu, Zhi-Long, et al.
(författare)
-
Fire-Retardant and Thermally Insulating Phenolic-Silica Aerogels
- 2018
-
Ingår i: Angewandte Chemie International Edition. - : Wiley. - 1433-7851 .- 1521-3773. ; 57:17, s. 4538-4542
-
Tidskriftsartikel (refereegranskat)abstract
- Energy efficient buildings require materials with a low thermal conductivity and a high fire resistance. Traditional organic insulation materials are limited by their poor fire resistance and inorganic insulation materials are either brittle or display a high thermal conductivity. Herein we report a mechanically resilient organic/inorganic composite aerogel with a thermal conductivity significantly lower than expanded polystyrene and excellent fire resistance. Co-polymerization and nanoscale phase separation of the phenol-formaldehyde-resin (PFR) and silica generate a binary network with domain sizes below 20 nm. The PFR/SiO2 aerogel can resist a high-temperature flame without disintegration and prevents the temperature on the non-exposed side from increasing above the temperature critical for the collapse of reinforced concrete structures.
|
|
| 4. |
- Bardini, M, et al.
(författare)
-
Clonal variegation and dynamic competition of leukemia-initiating cells in infant acute lymphoblastic leukemia with MLL rearrangement.
- 2015
-
Ingår i: Leukemia. - : Springer Science and Business Media LLC. - 1476-5551 .- 0887-6924. ; 29:1, s. 38-50
-
Tidskriftsartikel (refereegranskat)abstract
- Distinct from most other acute lymphoblastic leukemia (ALL), infant ALL with mixed lineage leukemia (MLL) gene rearrangement, the most common leukemia occurring within the first year of life, might arise without the need for cooperating genetic lesions. Through Ig/TCR rearrangement analysis of MLL-AF4+ infant ALL at diagnosis and xenograft leukemias from mice transplanted with the same diagnostic samples, we established that MLL-AF4+ infant ALL is composed of a branching subclonal architecture already at diagnosis, frequently driven by a Ig/TCR-rearranged founder clone. Some MLL-AF4+ clones appear to be largely quiescent at diagnosis but can reactivate and dominate when serially transplanted into immune-deficient mice, whereas other dominant clones at diagnosis can become more quiescent, suggesting a dynamic competition between actively proliferating and quiescent subclones. Investigation of paired diagnostic and relapse samples suggested that relapses often occur from subclones already present but more quiescent at diagnosis. Copy number alterations identified at relapse might contribute to the activation and expansion of previously quiescent subclones. Finally, each of the identified subclones is able to contribute to the diverse phenotypic pool of MLL-AF4+ leukemia-propagating cells. Unraveling of the subclonal architecture and dynamics in MLL+ infant ALL may provide possible explanations for the therapy resistance and frequent relapses observed in this group of poor prognosis ALL.Leukemia accepted article preview online, 06 May 2014; doi:10.1038/leu.2014.154.
|
|
| 5. |
- Berndt, Sonja I., et al.
(författare)
-
Meta-analysis of genome-wide association studies discovers multiple loci for chronic lymphocytic leukemia
- 2016
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 7
-
Tidskriftsartikel (refereegranskat)abstract
- Chronic lymphocytic leukemia (CLL) is a common lymphoid malignancy with strong heritability. To further understand the genetic susceptibility for CLL and identify common loci associated with risk, we conducted a meta-analysis of four genome-wide association studies (GWAS) composed of 3,100 cases and 7,667 controls with follow-up replication in 1,958 cases and 5,530 controls. Here we report three new loci at 3p24.1 (rs9880772, EOMES, P = 2.55 x 10(-11)), 6p25.2 (rs73718779, SERPINB6, P = 1.97 x 10(-8)) and 3q28 (rs9815073, LPP, P = 3.62 x 10(-8)), as well as a new independent SNP at the known 2q13 locus (rs9308731, BCL2L11, P = 1.00 x 10(-11)) in the combined analysis. We find suggestive evidence (P<5 x 10(-7)) for two additional new loci at 4q24 (rs10028805, BANK1, P = 7.19 x 10(-8)) and 3p22.2 (rs1274963, CSRNP1, P = 2.12 x 10(-7)). Pathway analyses of new and known CLL loci consistently show a strong role for apoptosis, providing further evidence for the importance of this biological pathway in CLL susceptibility.
|
|
| 6. |
- Fu, Lian-Hua, et al.
(författare)
-
Microwave-Assisted Hydrothermal Synthesis of Cellulose/Hydroxyapatite Nanocomposites
- 2016
-
Ingår i: Polymers. - : MDPI AG. - 2073-4360. ; 8:9
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, we report a facile, rapid, and green strategy for the synthesis of cellulose/hydroxyapatite (HA) nanocomposites using an inorganic phosphorus source (sodium dihydrogen phosphate dihydrate (NaH(2)PO(4)2H(2)O)), or organic phosphorus sources (adenosine 5-triphosphate disodium salt (ATP), creatine phosphate disodium salt tetrahydrate (CP), or D-fructose 1,6-bisphosphate trisodium salt octahydrate (FBP)) through the microwave-assisted hydrothermal method. The effects of the phosphorus sources, heating time, and heating temperature on the phase, size, and morphology of the products were systematically investigated. The experimental results revealed that the phosphate sources played a critical role on the phase, size, and morphology of the minerals in the nanocomposites. For example, the pure HA was obtained by using NaH(2)PO(4)2H(2)O as phosphorus source, while all the ATP, CP, and FBP led to the byproduct, calcite. The HA nanostructures with various morphologies (including nanorods, pseudo-cubic, pseudo-spherical, and nano-spherical particles) were obtained by varying the phosphorus sources or adjusting the reaction parameters. In addition, this strategy is surfactant-free, avoiding the post-treatment procedure and cost for the surfactant removal from the product. We believe that this work can be a guidance for the green synthesis of cellulose/HA nanocomposites in the future.
|
|
| 7. |
- Li, Youbing, et al.
(författare)
-
Single-Atom-Thick Active Layers Realized in Nanolaminated Ti-3(AlxCu1-x)C-2 and Its Artificial Enzyme Behavior
- 2019
-
Ingår i: ACS Nano. - : AMER CHEMICAL SOC. - 1936-0851 .- 1936-086X. ; 13:8, s. 9198-9205
-
Tidskriftsartikel (refereegranskat)abstract
- A Ti-3(AlxCu1-x)C-2 phase with Cu atoms with a degree of ordering in the A plane is synthesized through the A site replacement reaction in CuCl2 molten salt. The weakly bonded single -atom -thick Cu layers in a Ti-3(AlxCu1-x)C-2 MAX phase provide actives sites for catalysis chemistry. As -synthesized Ti-3(AlxCu1-x)C-2 presents unusual peroxidase-like catalytic activity similar to that of natural enzymes. A fabricated Ti-3(AlxCu1-x)C-2/chitosan/glassy carbon electrode biosensor prototype also exhibits a low detection limit in the electrochemical sensing of H2O2. These results have broad implications for property tailoring in a nanolaminated MAX phase by replacing the A site with late transition elements.
|
|
| 8. |
- Lin, Yuze, et al.
(författare)
-
Mapping Polymer Donors toward High-Efficiency Fullerene Free Organic Solar Cells
- 2017
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 29:3
-
Tidskriftsartikel (refereegranskat)abstract
- Five polymer donors with distinct chemical structures and different electronic properties are surveyed in a planar and narrow-bandgap fused-ring electron acceptor (IDIC)-based organic solar cells, which exhibit power conversion efficiencies of up to 11%.
|
|
| 9. |
- Machiela, Mitchell J., et al.
(författare)
-
Genetically predicted longer telomere length is associated with increased risk of B-cell lymphoma subtypes
- 2016
-
Ingår i: Human Molecular Genetics. - : Oxford University Press (OUP). - 0964-6906 .- 1460-2083. ; 25:8, s. 1663-1676
-
Tidskriftsartikel (refereegranskat)abstract
- Evidence from a small number of studies suggests that longer telomere length measured in peripheral leukocytes is associated with an increased risk of non-Hodgkin lymphoma (NHL). However, these studies may be biased by reverse causation, confounded by unmeasured environmental exposures and might miss time points for which prospective telomere measurement would best reveal a relationship between telomere length and NHL risk. We performed an analysis of genetically inferred telomere length and NHL risk in a study of 10 102 NHL cases of the four most common B-cell histologic types and 9562 controls using a genetic risk score (GRS) comprising nine telomere length-associated single-nucleotide polymorphisms. This approach uses existing genotype data and estimates telomere length by weighing the number of telomere length-associated variant alleles an individual carries with the published change in kb of telomere length. The analysis of the telomere length GRS resulted in an association between longer telomere length and increased NHL risk [four B-cell histologic types combined; odds ratio (OR) = 1.49, 95% CI 1.22-1.82, P-value = 8.5 x 10(-5)]. Subtype-specific analyses indicated that chronic lymphocytic leukemia or small lymphocytic lymphoma (CLL/SLL) was the principal NHL subtype contributing to this association (OR = 2.60, 95% CI 1.93-3.51, P-value = 4.0 x 10(-10)). Significant interactions were observed across strata of sex for CLL/SLL and marginal zone lymphoma subtypes as well as age for the follicular lymphoma subtype. Our results indicate that a genetic background that favors longer telomere length may increase NHL risk, particularly risk of CLL/SLL, and are consistent with earlier studies relating longer telomere length with increased NHL risk.
|
|
| 10. |
- Wang, Dian-Zheng, et al.
(författare)
-
Cracking Behavior in Additively Manufactured Pure Tungsten
- 2019
-
Ingår i: Acta Metallurgica Sinica (English Letters). - : Springer Science and Business Media LLC. - 1006-7191 .- 2194-1289. ; 32:1, s. 127-135
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, near fully dense (96.5%) pure tungsten bulks were additively manufactured and the cracking behavior was investigated. A crack network with a spacing of similar to 100m was observed in the fabricated bulks. It was observed that the laser scanning strategy, which could tailor the microstructure, affected the crack distribution pattern in fabricated tungsten. The calculated surface temperature difference (7300K) was much higher than the cracking criterion (800K) of tungsten, indicating that cracking is almost inevitable in laser additive manufacturing of tungsten. It could be concluded that crack network formed because the cracks emerged in every laser molten track and then interconnected in the layer-by-layer building process.
|
|
