| 1. |
- Weidemann, Eva, 1982-
(författare)
-
Waste incineration residues : Persistent organic pollutants in flue gas and fly ash from waste incineration
- 2014
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Modern societies produce large quantities of municipal solid waste (MSW), which is commonly disposed of by incineration. This has several advantages: it reduces the waste’s volume and sterilizes it while also enabling energy recovery. However, MSW incineration has some notable disadvantages, the most widely debated of which is probably the production and release of persistent organic pollutants (POP) such as polychlorinated dibenzofurans (PCDF), dibenzo-p-dioxins (PCDD), biphenyls (PCB) and naphthalenes (PCN). Of the 210 PCDF and PCDD congeners, 17 are toxic, with hormone-disrupting and carcinogenic properties. Twelve of the 209 PCB congeners and at least 2 of the 75 PCN also exhibit such properties. These POP form in the post-combustion zones of MSW incineration plants and are removed from the flue gas using filtering devices that trap them in the fly ashThis thesis concerns the formation and degradation of POP in processes related to MSW incineration. The first paper describes a case study in which PCDD were forming in filters designed to remove them from flue gases, causing emission-related issues in a full-scale MSW incineration plant. It was shown that the PCDD formation was probably due to chlorophenol condensation on the filters’ surfaces.The second paper describes the validation of a cooling probe designed to prevent POP formation during high temperature (>450 °C) flue gas sampling. The results obtained also confirmed that PCDF and PCDD formation takes place at temperatures below 600 °C.In the third paper, three different fly ashes were subjected to thermal treatment under an inert atmosphere in a rotary kiln and in sealed ampoules at 400 °C. The concentrations, degrees of chlorination and congener profiles of the POP in the treated ashes and emitted gases were compared to those for the untreated ashes. The trends observed for PCDF mirrored those for PCN, while the trends for PCDD closely resembled those for PCB. The PCDF congener profiles of the kiln ash were similar regardless of the initial ash composition, suggesting that the mechanisms of PCDF formation were similar in all cases.The fourth paper describes the surface characterization of the three fly ashes studied in paper three by SEM, EDX, XPS and XRD. In addition, the thermal desorption and subsequent degradation of POP from the ashes was studied at temperatures of 300-900 °C. The composition of the gases released as the temperature increased differed between the ashes and depended on their composition. Doping experiments using isotopically labelled PCDF and PCDD suggests that PCDD desorbed at lower temperatures than PCDF.This thesis examines several problems relating to POP formation during MSW incineration, from sampling to the ultimate fate of incineration residues. The results obtained illustrate the wide range of processes that contribute to thermal POP formation and degradation during and after MSW incineration.
|
|
| 2. |
- Phan, Duong Ngoc Chau, 1985-
(författare)
-
The relationship between fly ash chemistry and the thermal formation of polychlorinated pollutants during waste incineration
- 2013
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The thermal formation of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), biphenyls (PCBs), and naphthalenes (PCNs) is a major problem in waste incineration. Ideally, rather than relying on air cleaning systems and treatment techniques, their formation should be minimized or, if possible eliminated. The work presented in this thesis was conducted to obtain a deeper understanding of the thermal formation of PCDDs, PCDFs, PCBs, and PCNs during incineration using a 5 kW laboratory scale incinerator and two artificial wastes that were designed to reflect regional differences in waste composition.The first part of the thesis focuses on the validation of a recently-developed flue-gas sampling probe with enhanced cooling capabilities. Artifact formation of PCDDs and PCDFs can occur during the sampling of hot flue gases if the cooling is insufficient. The new probe was successfully used to collect samples at 700 °C without biasing the measured POP levels. The thermal formation of PCDDs, PCDFs, PCBs, and PCNs in the post-combustion zone of the incinerator was then studied by collecting flue gas samples at 400 °C, 300 °C, and 200 °C during the incineration of the two artificial wastes. Highly chlorinated POPs were formed in larger quantities when burning the waste with the higher content of metals and chlorine, which suggests that high metal levels in the waste favor the chlorination of less chlorinated POPs or otherwise facilitate the formation of highly chlorinated polyaromatics, possibly via the condensation of highly chlorinated phenols. The concentrations of these pollutants and the abundance of highly chlorinated homologues increased as the flue gas cooled. Fly ash particles play an important role in thermal POP formation by providing essential elements (carbon, chlorine, etc.) and catalytic sites. The chemical and mineralogical properties of fly ash samples were studied by X-ray diffraction (XRD), Fourier Transform Infrared (FTIR), Scanning Electron Microscopy/Energy Dispersive X-ray (SEM/EDX), and X-ray photoelectron spectroscopy (XPS) to determine their impact on thermal POP formation. Orthogonal Partial Least Squares (OPLS) modeling was used to identify correlations between the observed POP distributions and the physicochemical data. This investigation provided new insights into the impact of fly ash chemistry on thermal POP formation.In addition, the POP isomer distribution patterns generated during waste combustion were examined. These patterns are used to “fingerprint” mechanisms of POP formation. It was found that wastes containing large quantities of metals and chlorine favored the formation of highly chlorinated homologues including the very toxic 2,3,7,8-congeners. The data suggest that reducing fly ash emissions might increase the SO2 content of the flue gas and thereby suppress the Deacon process and the formation of harmful highly chlorinated aromatic species.
|
|
