| 1. |
- Levin, Sune, 1991, et al.
(författare)
-
Nanofluidic Trapping of Faceted Colloidal Nanocrystals for Parallel Single-Particle Catalysis
- 2022
-
Ingår i: Acs Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 16:9, s. 15206-15214
-
Tidskriftsartikel (refereegranskat)abstract
- Catalyst activity can depend distinctly on nano -particle size and shape. Therefore, understanding the structure sensitivity of catalytic reactions is of fundamental and technical importance. Experiments with single-particle resolution, where ensemble-averaging is eliminated, are required to study it. Here, we implement the selective trapping of individual spherical, cubic, and octahedral colloidal Au nanocrystals in 100 parallel nanofluidic channels to determine their activity for fluorescein reduction by sodium borohydride using fluorescence microscopy. As the main result, we identify distinct structure sensitivity of the rate-limiting borohydride oxidation step originating from different edge site abundance on the three particle types, as confirmed by first -principles calculations. This advertises nanofluidic reactors for the study of structure-function correlations in catalysis and identifies nanoparticle shape as a key factor in borohydride-mediated catalytic reactions.
|
|
| 2. |
- Kashinath Dhokale, Bhausaheb, 1985, et al.
(författare)
-
Microwave-heated γ-Alumina Applied to the Reduction of Aldehydes to Alcohols
- 2020
-
Ingår i: ChemCatChem. - : Wiley. - 1867-3899 .- 1867-3880. ; 12:24, s. 6344-6355
-
Tidskriftsartikel (refereegranskat)abstract
- The development of cheap and robust heterogeneous catalysts for the Meerwein-Ponndorf-Verley (MPV) reduction is desirable due to the difficulties in product isolation and catalyst recovery associated with the traditional use of homogeneous catalysts for MPV. Herein, we show that microwave heated γ-Al2O3 can be used for the reduction of aldehydes to alcohols. The reaction is efficient and has a broad substrates scope (19 entries). The products can be isolated by simple filtration, and the catalyst can be regenerated. With the use of microwave heating, we can direct the heating to the catalyst rather than to the whole reaction medium. Furthermore, DFT was used to study the reaction mechanism, and we can conclude that a dual-site mechanism is operative where the aldehyde and 2-propoxide are situated on two adjacent Al sites during the reduction. Additionally, volcano plots were used to rationalize the reactivity of Al2O3 in comparison to other metal oxides.
|
|
| 3. |
- Barbosa de Mattos, Deise Fernanda, 1985, et al.
(författare)
-
Covalent incorporation of diphenylanthracene in oxotriphenylhexanoate organogels as a quasi-solid photon upconversion matrix
- 2020
-
Ingår i: Journal of Chemical Physics. - : AIP Publishing. - 1089-7690 .- 0021-9606. ; 153:21
-
Tidskriftsartikel (refereegranskat)abstract
- Triplet-triplet annihilation photon upconversion (TTA-UC) in solid state assemblies are desirable since they can be easily incorporated into devices such as solar cells, thus utilizing more of the solar spectrum. Realizing this is, however, a significant challenge that must circumvent the need for molecular diffusion, poor exciton migration, and detrimental back energy transfer among other hurdles. Here, we show that the above-mentioned issues can be overcome using the versatile and easily synthesized oxotriphenylhexanoate (OTHO) gelator that allows covalent incorporation of chromophores (or other functional units) at well-defined positions. To study the self-assembly properties as well as its use as a TTA-UC platform, we combine the benchmark couple platinum octaethylporphyrin as a sensitizer and 9,10-diphenylanthracene (DPA) as an annihilator, where DPA is covalently linked to the OTHO gelator at different positions. We show that TTA-UC can be achieved in the chromophore-decorated gels and that the position of attachment affects the photophysical properties as well as triplet energy transfer and triplet-triplet annihilation. This study not only provides proof-of-principle for the covalent approach but also highlights the need for a detailed mechanistic insight into the photophysical processes underpinning solid state TTA-UC.
|
|
| 4. |
- Chen, Yidong, et al.
(författare)
-
Catalytically active and thermally stable core-shell gold-silica nanorods for CO oxidation
- 2021
-
Ingår i: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 11:19, s. 11642-11650
-
Tidskriftsartikel (refereegranskat)abstract
- Deactivation based on sintering phenomena is one of the most costly issues for the industrial application of metal nanoparticle catalysts. To address this drawback, mesoporous silica encapsulation is reported as a promising strategy to stabilize metallic nanoparticles towards use in high temperature catalytic applications. These protective shells provide significant structural support to the nanoparticles, while the mesoporosity allows for efficient transport of the reactants to the catalytically active surface of the metallic nanoparticle in the core. Here, we extend the use of gold nanorods with mesoporous silica shells by investigating their stability in the CO oxidation reaction as an example of high temperature gas phase catalysis. Gold nanorods were chosen as the model system due to the availability of a simple, high yield synthesis method for both the metallic nanorods and the mesoporous silica shells. We demonstrate the catalytic activity of gold nanorods with mesoporous silica shells at temperatures up to 350 degrees C over several cycles, as well as the thermal stability up to 500 degrees C, and compare these results to surfactant-stabilized gold nanorods of similar size, which degrade, and lose most of their catalytic activity, before reaching 150 degrees C. These results show that the gold nanorods protected by the mesoporous silica shells have a significantly higher thermal stability than surfactant-stabilized gold nanorods and that the mesoporous silica shell allows for stable catalytic activity with little degradation at high temperatures.
|
|
| 5. |
- Darmadi, Iwan, 1990, et al.
(författare)
-
Bulk-Processed Pd Nanocube-Poly(methyl methacrylate) Nanocomposites as Plasmonic Plastics for Hydrogen Sensing
- 2020
-
Ingår i: ACS Applied Nano Materials. - : American Chemical Society (ACS). - 2574-0970. ; 3:8, s. 8438-8445
-
Tidskriftsartikel (refereegranskat)abstract
- Nanoplasmonic hydrogen sensors are predicted to play a key role in safety systems of the emerging hydrogen economy. Pd nanoparticles are the active material of choice for sensor prototype development due to their ability to form a hydride at ambient conditions, which creates the optical contrast. Here, we introduce plasmonic hydrogen sensors made from a thermoplastic nanocomposite material, that is, a bulk material that can be molded with standard plastic processing techniques, such as extrusion and three-dimensional (3D) printing, while at the same time being functionalized at the nanoscale. Specifically, our plasmonic plastic is composed of hydrogensensitive and plasmonically active Pd nanocubes mixed with a poly(methyl methacrylate) matrix, and we optimize it by characterization from the atomic to the macroscopic level. We demonstrate meltprocessed deactivation-resistant plasmonic hydrogen sensors, which retain full functionality even after SO weeks. From a wider perspective, we advertise plasmonic plastic nanocomposite materials for application in a multitude of active plasmonic technologies since they provide efficient scalable processing and almost endless functional material design opportunities via tailored polymer- colloidal nanocrystal combinations.
|
|
| 6. |
- Darmadi, Iwan, 1990, et al.
(författare)
-
Bulk-Processed Plasmonic Plastic Nanocomposite Materials for Optical Hydrogen Detection
- 2023
-
Ingår i: Accounts of Chemical Research. - 0001-4842 .- 1520-4898. ; 56:13, s. 1850-1861
-
Tidskriftsartikel (refereegranskat)abstract
- Conspectus Sensors are ubiquitous, andtheir importanceis only going to increaseacross many areas of modern technology. In this respect, hydrogengas (H-2) sensors are no exception since they allow mitigationof the inherent safety risks associated with mixtures of H-2 and air. The deployment of H-2 technologies is rapidlyaccelerating in emerging energy, transport, and green steel-makingsectors, where not only safety but also process monitoring sensorsare in high demand. To meet this demand, cost-effective and scalableroutes for mass production of sensing materials are required. Here,the state-of-the-art often resorts to processes derived from the microelectronicsindustry where surface-based micro- and nanofabrication are the methodsof choice and where (H-2) sensor manufacturing is no exception. In this Account, we discuss how our recent efforts to develop sensorsbased on plasmonic plastics may complement the current state-of-the-art.We explore a new H-2 sensor paradigm, established througha series of recent publications, that combines (i) the plasmonic opticalH(2) detection principle and (ii) bulk-processed nanocompositematerials. In particular, plasmonic plastic nanocomposite sensingmaterials are described that comprise plasmonic H-2-sensitivecolloidally synthesized nanoparticles dispersed in a polymer matrixand enable the additive manufacturing of H-2 sensors ina cost-effective and scalable way. We first discuss the concept ofplasmonic plastic nanocomposite materials for the additive manufacturingof an active plasmonic sensing material on the basis of the threekey components that require individual and concerted optimization:(i) the plasmonic sensing metal nanoparticles, (ii) the surfactant/stabilizermolecules on the nanoparticle surface from colloidal synthesis, and(iii) the polymer matrix. We then introduce the working principleof plasmonic H-2 detection, which relies on the selectiveabsorption of H species into hydride-forming metal nanoparticles that,in turn, induces distinct changes in their optical plasmonic signaturein proportion to the H-2 concentration in the local atmosphere.Subsequently, we assess the roles of the key components of a plasmonicplastic for H-2 sensing, where we have established that(i) alloying Pd with Au and Cu eliminates hysteresis and introducesintrinsic deactivation resistance at ambient conditions, (ii) surfactant/stabilizermolecules can significantly accelerate and decelerate H-2 sorption and thus sensor response, and (iii) polymer coatings acceleratesensor response, reduce the limit of detection (LoD), and enable molecularfiltering for sensor operation in chemically challenging environments.Based on these insights, we discuss the rational development and detailedcharacterization of bulk-processed plasmonic plastics based on glassyand fluorinated matrix polymers and on tailored flow-chemistry-basedsynthesis of Pd and PdAu alloy colloidal nanoparticles with optimizedstabilizer molecules. In their champion implementation, they enablehighly stable H-2 sensors with response times in the 2 srange and an LoD of few 10 ppm of H-2. To put plasmonicplastics in a wider perspective, we also report their implementationusing different polymer matrix materials that can be used for 3D printingand (an)isotropic Au nanoparticles that enable the manufacturing ofmacroscopic plasmonic objects with, if required, dichroic opticalproperties and in amounts that can be readily upscaled. We advertisethat melt processing of plasmonic plastic nanocomposites is a viableroute toward the realization of plasmonic objects and sensors, producedby scalable colloidal synthesis and additive manufacturing techniques.
|
|
| 7. |
- Darmadi, Iwan, 1990, et al.
(författare)
-
Plasma Cleaning of Cationic Surfactants from Pd Nanoparticle Surfaces: Implications for Hydrogen Sorption
- 2023
-
Ingår i: ACS Applied Nano Materials. - 2574-0970. ; 6:10, s. 8168-8177
-
Tidskriftsartikel (refereegranskat)abstract
- Cationic surfactants are widely used in the colloidal synthesis of noble metal nanoparticles in general, and of Pd nanoparticles in particular, to stabilize them toward aggregate formation in solution and to promote shape-specific particle growth. Despite the benefits at the synthesis stage, these surfactants can be problematic once the nanoparticles are to be applied as they may both geometrically block and electronically alter surface sites that are important for surface chemical reactions. This is particularly relevant in applications like bio- and chemosensors where analyte-nanoparticle surface interactions constitute the actual sensing event. Here, H2 sensors based on Pd and its alloys are no exception since the dissociation of H2 on the particle surface is the first step toward hydride formation and thus hydrogen detection, and it has been demonstrated that the presence of surfactant molecules detrimentally affects the hydrogen sorption rate. Here, we therefore develop a scheme to remove cationic surfactants from Pd nanoparticle surfaces by means of subsequent O2 and H2 plasma treatment, whose effectiveness we verify by X-ray photoelectron spectroscopy. Furthermore, we find that the plasma treatment both alters the surface structure of the Pd nanoparticles at the atomic level and leads to surface contamination by so-called H2 plasma swift chemical sputtering of Al, Si and F species present in the plasma chamber, which in combination significantly reduce hydrogen sorption rates and increase apparent activation energies, as revealed by plasmonic hydrogen sorption kinetic measurements. Finally, we show that both these effects can be reversed by mild thermal annealing and that after the complete plasma cleaning-thermal annealing sequence hydrogen sorption rates essentially identical to the ones of neat Pd particles never exposed to cationic surfactants can be achieved. This advertises tailored plasma cleaning and mild heat treatments as an effective recipe for the removal of surfactant molecules from nanoparticle surfaces.
|
|
| 8. |
- Eklöf, Johnas, 1988, et al.
(författare)
-
Understanding Interactions Driving the Template-Directed Self-Assembly of Colloidal Nanoparticles at Surfaces
- 2020
-
Ingår i: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 124:8, s. 4660-4667
-
Tidskriftsartikel (refereegranskat)abstract
- Controlled deposition of colloidal nanoparticles using self-assembly is a promising technique for, for example, manufacturing of miniaturized electronics, and it bridges the gap between top-down and bottom-up methods. However, selecting materials and geometry of the target surface for optimal deposition results presents a significant challenge. Here, we describe a predictive framework based on the Derjaguin-Landau-Verwey-Overbeek theory that allows rational design of colloidal nanoparticle deposition setups. The framework is demonstrated for a model system consisting of gold nanoparticles stabilized by trisodium citrate that are directed toward prefabricated sub-100 nm features on a silicon substrate. Experimental results for the model system are presented in conjunction with theoretical analysis to assess its reliability. It is shown that three-dimensional, nickel-coated structures are well suited for attracting gold nanoparticles and that optimization of the feature geometry based on the proposed framework leads to a systematic improvement in the number of successfully deposited particles.
|
|
| 9. |
- Lerch, Sarah, 1990, et al.
(författare)
-
Robust Colloidal Synthesis of Palladium-Gold Alloy Nanoparticles for Hydrogen Sensing
- 2021
-
Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 13:38, s. 45758-45767
-
Tidskriftsartikel (refereegranskat)abstract
- Metal nanoparticles are currently used in a variety of applications, ranging from life sciences to nanoelectronic devices to gas sensors. In particular, the use of palladium nanoparticles is gaining increasing attention due to their ability to catalyze the rapid dissociation of hydrogen, which leads to an excellent response in hydrogen-sensing applications. However, current palladium-nanoparticle-based sensors are hindered by the presence of hysteresis upon hydride formation and decomposition, as this hysteresis limits sensor accuracy. Here, we present a robust colloidal synthesis for palladium-gold alloy nanoparticles and demonstrate their hysteresis-free response when used for hydrogen detection. The obtained colloidal particles, synthesized in an aqueous, room-temperature environment, can be tailored to a variety of applications through changing the size, ratio of metals, and surface stabilization. In particular, the variation of the viscosity of the mixture during synthesis resulted in a highly tunable size distribution and contributed to a significant improvement in size dispersity compared to the state-of-the-art methods.
|
|
| 10. |
- Stolas, Alicja, 1992, et al.
(författare)
-
Impact of Surfactants and Stabilizers on Palladium Nanoparticle–Hydrogen Interaction Kinetics: Implications for Hydrogen Sensors
- 2020
-
Ingår i: ACS Applied Nano Materials. - : American Chemical Society (ACS). - 2574-0970. ; 3:3, s. 2647-2653
-
Tidskriftsartikel (refereegranskat)abstract
- Surfactants and stabilizers are always present on the surfaces of colloidal nanocrystals due to their critical function in promoting selective facet growth and since they are essential to prevent aggregate formation in solution. After synthesis, however, the presence of these molecules on the surface of a nanocrystal is problematic because they potentially significantly alter the nature of the interaction with the environment, which is critical for sensor or catalysis applications. Here, we quantitatively scrutinize this effect experimentally for the four most common stabilizers in Pd nanoparticle synthesis: cetyltrimethylammonium bromide (CTAB), tetraoctylammonium bromide (TOAB), cetyltrimethylammonium chloride (CTAC), and poly(vinylpyrrolidone) (PVP). We use the surface-catalyzed hydrogen sorption and hydride formation reaction in Pd as a model system, due to its high relevance for hydrogen sensors. Specifically, we map in detail the (de)hydrogenation kinetics of arrays of nanofabricated Pd nanodisks in the presence of the surfactants and benchmark it with an uncoated Pd reference. As the key results, we find that the cationic surfactants significantly decelerate the (de)hydrogenation surface reaction, with the amplitude of deceleration mediated by the interplay between the halide-ion–Pd surface interaction strength and surfactant surface density. In contrast, a polymeric PVP coating is found to significantly accelerate hydrogen sorption. For the Pd-based hydrogen sensor application, our findings thus provide important insights for the appropriate choice of a surfactant to minimize the negative impact on hydrogen sorption kinetics and thus hydrogen detection response/recovery times. In a wider perspective, our results dramatically show how nanoparticles can attain different properties depending on what types of surfactants and stabilizers are present on their surface and how critical the quantitative understanding of their impact is for a specific application.
|
|
