| 1. |
- Zhang, Renyun, et al.
(författare)
-
Soap-film coating : High-speed deposition of multilayer nanofilms
- 2013
-
Ingår i: Scientific Reports. - Nature Publishing Group : Springer Science and Business Media LLC. - 2045-2322. ; 3, s. Art. no. 1477-
-
Tidskriftsartikel (refereegranskat)abstract
- The coating of thin films is applied in numerous fields and many methods are employed for the deposition of these films. Some coating techniques may deposit films at high speed; for example, ordinary printing paper is coated with micrometre-thick layers of clay at a speed of tens of meters per second. However, to coat nanometre thin films at high speed, vacuum techniques are typically required, which increases the complexity of the process. Here, we report a simple wet chemical method for the high-speed coating of films with thicknesses at the nanometre level. This soap-film coating technique is based on forcing a substrate through a soap film that contains nanomaterials. Molecules and nanomaterials can be deposited at a thickness ranging from less than a monolayer to several layers at speeds up to meters per second. We believe that the soap-film coating method is potentially important for industrial-scale nanotechnology.
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
- Andersson, Henrik, et al.
(författare)
-
Assembling surface mounted components on ink-jet printed double sided paper circuit board
- 2014
-
Ingår i: Nanotechnology. - : IOP Publishing. - 0957-4484 .- 1361-6528. ; 25:9
-
Tidskriftsartikel (refereegranskat)abstract
- Printed electronics is a rapidly developing field where many components can already be manufactured on flexible substrates by printing or by other high speed manufacturing methods. However, the functionality of even the most inexpensive microcontroller or other integrated circuit is, at the present time and for the foreseeable future, out of reach by means of fully printed components. Therefore, it is of interest to investigate hybrid printed electronics, where regular electrical components are mounted on flexible substrates to achieve high functionality at a low cost. Moreover, the use of paper as a substrate for printed electronics is of growing interest because it is an environmentally friendly and renewable material and is, additionally, the main material used for many packages in which electronics functionalities could be integrated. One of the challenges for such hybrid printed electronics is the mounting of the components and the interconnection between layers on flexible substrates with printed conductive tracks that should provide as low a resistance as possible while still being able to be used in a high speed manufacturing process. In this article, several conductive adhesives are evaluated as well as soldering for mounting surface mounted components on a paper circuit board with ink-jet printed tracks and, in addition, a double sided Arduino compatible circuit board is manufactured and programmed.
|
|
| 5. |
- Andersson, Henrik, et al.
(författare)
-
Contacting paper-based supercapacitors to printed electronics on paper substrates
- 2012
-
Ingår i: Nordic Pulp & Paper Research Journal. - 0283-2631 .- 2000-0669. ; 27:2, s. 476-480
-
Tidskriftsartikel (refereegranskat)abstract
- Hybrid printed electronics, in which printed structures and silicon-based components co-exist will likely be among the first commercial solutions. In this case the paper substrate acts much in the same way as circuit boards, containing conductive tracks and acting as a carrier for the electrical components. It is important to consider the contacting of the components to be able to produce low resistance electrical contacts to the conductive tracks. Supercapacitors are able to deliver a large amount of current in a short time and are a good option for short term energy storage and if the printed product is to be used only one, or a few times, it can be the only power source needed. When manufacturing printed electronics, the overall resistance of the printed tracks as well as the contact resistance of the mounted components will add up to the total resistance of the system. A high resistance will cause a voltage drop from the power source to the component. This will waste power that goes to Joule heating and also the voltage and current available to components may be too low to drive them. If the intention is to use a power supply such as batteries or solar cells this becomes a limitation. In this article have been tested several conductive adhesives used to contact paper based supercapacitors to ink jet printed silver tracks on paper. The best adhesive gives about 0.3 Ω per contact, a factor 17 better compared to the worst which gave 5 Ω. The peak power that is possible to take out from a printed system with a flexible battery and super capacitors is about 10 times higher than compared with the same system with only the battery.
|
|
| 6. |
- Andres, Britta, et al.
(författare)
-
Characterization of nanographite and graphene produced in a high-pressure homogenizer
- 2014
-
Ingår i: Graphene Week 2014.
-
Konferensbidrag (refereegranskat)abstract
- Supercapacitor electrodes are often made of porous carbon materials such as activated carbon, but also graphene was frequently used as active electrode material. Graphene can be produced by mechanical exfoliation, chemical exfoliation, chemical vapor deposition or other elaborate methods. These techniques are relatively expensive and produce small quantities only. Recently we presented a method to produce nanographite and graphene by mechanical exfoliation of graphite in a high-pressure homogenizer. In our contribution “Large-scale production of graphene” by Nicklas Blomquist we suggest to optimize the geometry of the shear zone and increase the feeding pressure to obtain a higher yield.In this study we evaluated the influence of these process optimizations on the structural and electrical properties of the nanographite-graphene mixture. The produced dispersions were characterized in terms of particle size and shape by using a particle size analyzer, a transmission electron microscope (TEM) and an atomic force microscope (AFM). In order to analyze the performance of the produced material as electrodes for supercapacitors, electrodes were produced by vacuum filtration. The electrodes were studied by sheet-resistance and capacitance measurements. Furthermore, the structure of the electrode surface and the cross section of the electrode were visualized by using a scanning electron microscope (SEM).Comparisons with previously produced nanographite-graphene dispersions showed an increase in yield of the exfoliated nanomaterials. The optimized shear zone increased the production of nanosized particles and flakes and enhanced the material quality.
|
|
| 7. |
- Andres, Britta, 1986-, et al.
(författare)
-
Enhanced electrical and mechanical properties of nanographite electrodes for supercapacitors by addition of nanobrillated cellulose
- 2014
-
Konferensbidrag (refereegranskat)abstract
- Graphene and other porous carbon materials are widely used as electrodes in supercapacitors. In order to form mechanically stable electrodes, binders can be added to the conducting electrode material. However, most binders degrade the electrical performance of the electrodes. Here we show that by using nanobrillated cellulose (NFC) as binder the electrical properties, such as sheet-resistance, were enhanced. NFC is a good ion conductor and improves the access of ions to the electrodes. Thus electrodes made of a mixture of nanographite and NFC achieved larger capacitances in supercapacitors than electrodes with nanographite only. The lowest sheet-resistance and the highest capacitance were measured at NFC contents of 10-15% in ratio to the total amount of active material. Furthermore, NFC formed a network that improved the mechanical stability of the electrodes signicantly. Beside the mechanical stability, NFC stabilized the aqueous nanographite dispersion that was used to prepare the electrodes. NFC avoids the restacking of the delaminated graphene akes by forming a ber network between the graphene layers.
|
|
| 8. |
- Andres, Britta, et al.
(författare)
-
Enhanced electrical and mechanical properties of nanographite electrodes for supercapacitors by addition of nanofibrillated cellulose
- 2014
-
Ingår i: Physica status solidi. B, Basic research. - : Wiley. - 0370-1972 .- 1521-3951. ; 251:12, s. 2581-2586
-
Tidskriftsartikel (refereegranskat)abstract
- Graphene and porous carbon materials are widely used as electrodes in supercapacitors. In order to form mechanically stable electrodes, binders can be added to the conducting electrode material. However, most bindersdegrade the electrical performance of the electrodes. Here we show that by using nanofibrillated cellulose(NFC) as binder the electrical properties, such as capacitance, were enhanced. The highest capacitance was measured at a NFC content of approximately 10% in ratio to the total amount of active material. NFC is a good ionconductor and improves the access of ions in the electrodes. Thus, electrodes made of a mixture of nanographite and NFC achieved larger capacitances in supercapacitors than electrodes with nanographite only. In addition to electrical properties, NFC enhanced the mechanical stability and wet strength of the electrodes significantly. Furthermore, NFC stabilized the aqueous nanographite dispersions, which improved the processability. Galvanostatic cycling was performed and an initial transient behaviour of the supercapacitors during the first cycles was observed. However, stabilized supercapacitors showed efficiencies of 98–100 %.
|
|
| 9. |
|
|
| 10. |
- Andres, Britta, 1986-
(författare)
-
Paper-based Supercapacitors
- 2014
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The growing market of mobile electronic devices, renewable off-grid energy sources and electric vehicles requires high-performance energy storage devices. Rechargeable batteries are usually the first choice due to their high energy density. However, supercapacitors have a higher power density and longer life-time compared to batteries. For some applications supercapacitors are more suitable than batteries. They can also be used to complement batteries in order to extend a battery's life-time. The use of supercapacitors is, however, still limited due to their high costs. Most commercially available supercapacitors contain expensive electrolytes and costly electrode materials.In this thesis I will present the concept of cost efficient, paper-based supercapacitors. The idea is to produce supercapacitors with low-cost, green materials and inexpensive production processes. We show that supercapacitor electrodes can be produced by coating graphite on paper. Roll-to-roll techniques known from the paper industry can be employed to facilitate an economic large-scale production. We investigated the influence of paper on the supercapacitor's performance and discussed its role as passive component. Furthermore, we used chemically reduced graphite oxide (CRGO) and a CRGO-gold nanoparticle composite to produce electrodes for supercapacitors. The highest specific capacitance was achieved with the CRGO-gold nanoparticle electrodes. However, materials produced by chemical synthesis and intercalation of nanoparticles are too costly for a large-scale production of inexpensive supercapacitor electrodes. Therefore, we introduced the idea of producing graphene and similar nano-sized materials in a high-pressure homogenizer. Layered materials like graphite can be exfoliated when subjected to high shear forces. In order to form mechanical stable electrodes, binders need to be added. Nanofibrillated cellulose (NFC) can be used as binder to improve the mechanical stability of the porous electrodes. Furthermore, NFC can be prepared in a high-pressure homogenizer and we aim to produce both NFC and graphene simultaneously to obtain a NFC-graphene composite. The addition of 10% NFC in ratio to the amount of graphite, increased the supercapacitor's capacitance, enhanced the dispersion stability of homogenized graphite and improved the mechanical stability of graphite electrodes in both dry and wet conditions. Scanning electron microscope images of the electrode's cross section revealed that NFC changed the internal structure of graphite electrodes depending on the type of graphite used. Thus, we discussed the influence of NFC and the electrode structure on the capacitance of supercapacitors.
|
|
