| 1. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 2. |
- Ferrando, Carlos, et al.
(författare)
-
Effects of oxygen on post-surgical infections during an individualised perioperative open-lung ventilatory strategy : a randomised controlled trial
- 2020
-
Ingår i: British Journal of Anaesthesia. - : ELSEVIER SCI LTD. - 0007-0912 .- 1471-6771. ; 124:1, s. 110-120
-
Tidskriftsartikel (refereegranskat)abstract
- Background: We aimed to examine whether using a high fraction of inspired oxygen (FIO2) in the context of an individualised intra- and postoperative open-lung ventilation approach could decrease surgical site infection (SSI) in patients scheduled for abdominal surgery. Methods: We performed a multicentre, randomised controlled clinical trial in a network of 21 university hospitals from June 6, 2017 to July 19, 2018. Patients undergoing abdominal surgery were randomly assigned to receive a high (0.80) or conventional (0.3) FIO2 during the intraoperative period and during the first 3 postoperative hours. All patients were mechanically ventilated with an open-lung strategy, which included recruitment manoeuvres and individualised positive end-expiratory pressure for the best respiratory-system compliance, and individualised continuous postoperative airway pressure for adequate peripheral oxyhaemoglobin saturation. The primary outcome was the prevalence of SSI within the first 7 postoperative days. The secondary outcomes were composites of systemic complications, length of intensive care and hospital stay, and 6-month mortality. Results: We enrolled 740 subjects: 371 in the high FIO2 group and 369 in the low FIO2 group. Data from 717 subjects were available for final analysis. The rate of SSI during the first postoperative week did not differ between high (8.9%) and low (9.4%) FIO2 groups (relative risk [RR]: 0.94; 95% confidence interval [CI]: 0.59-1.50; P=0.90]). Secondary outcomes, such as atelectasis (7.7% vs 9.8%; RR: 0.77; 95% CI: 0.48-1.25; P=0.38) and myocardial ischaemia (0.6% [n=2] vs 0% [n=0]; P=0.47) did not differ between groups. Conclusions: An oxygenation strategy using high FIO2 compared with conventional FIO2 did not reduce postoperative SSIs in abdominal surgery. No differences in secondary outcomes or adverse events were found.
|
|
| 3. |
- Alimena, Juliette, et al.
(författare)
-
Searching for long-lived particles beyond the Standard Model at the Large Hadron Collider
- 2020
-
Ingår i: Journal of Physics G. - : IOP Publishing. - 0954-3899 .- 1361-6471. ; 47:9
-
Tidskriftsartikel (refereegranskat)abstract
- Particles beyond the Standard Model (SM) can generically have lifetimes that are long compared to SM particles at the weak scale. When produced at experiments such as the Large Hadron Collider (LHC) at CERN, these long-lived particles (LLPs) can decay far from the interaction vertex of the primary proton-proton collision. Such LLP signatures are distinct from those of promptly decaying particles that are targeted by the majority of searches for new physics at the LHC, often requiring customized techniques to identify, for example, significantly displaced decay vertices, tracks with atypical properties, and short track segments. Given their non-standard nature, a comprehensive overview of LLP signatures at the LHC is beneficial to ensure that possible avenues of the discovery of new physics are not overlooked. Here we report on the joint work of a community of theorists and experimentalists with the ATLAS, CMS, and LHCb experiments-as well as those working on dedicated experiments such as MoEDAL, milliQan, MATHUSLA, CODEX-b, and FASER-to survey the current state of LLP searches at the LHC, and to chart a path for the development of LLP searches into the future, both in the upcoming Run 3 and at the high-luminosity LHC. The work is organized around the current and future potential capabilities of LHC experiments to generally discover new LLPs, and takes a signature-based approach to surveying classes of models that give rise to LLPs rather than emphasizing any particular theory motivation. We develop a set of simplified models; assess the coverage of current searches; document known, often unexpected backgrounds; explore the capabilities of proposed detector upgrades; provide recommendations for the presentation of search results; and look towards the newest frontiers, namely high-multiplicity 'dark showers', highlighting opportunities for expanding the LHC reach for these signals.
|
|
| 4. |
- Adamina, Michel, et al.
(författare)
-
ECCO Guidelines on Therapeutics in Crohns Disease: Surgical Treatment
- 2020
-
Ingår i: Journal of Crohn's & Colitis. - : OXFORD UNIV PRESS. - 1873-9946 .- 1876-4479. ; 14:2, s. 155-168
-
Tidskriftsartikel (refereegranskat)abstract
- This article is the second in a series of two publications relating to the European Crohns and Colitis Organisation [ECCO] evidence-based consensus on the management of Crohns disease. The first article covers medical management; the present article addresses surgical management, including preoperative aspects and drug management before surgery. It also provides technical advice for a variety of common clinical situations. Both articles together represent the evidence-based recommendations of the ECCO for Crohns disease and an update of previous guidelines.
|
|
| 5. |
- Backes, Claudia, et al.
(författare)
-
Production and processing of graphene and related materials
- 2020
-
Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
|
|
| 6. |
- Beato, Marco, et al.
(författare)
-
Current Guidelines for the Implementation of Flywheel Resistance Training Technology in Sports: A Consensus Statement
- 2024
-
Ingår i: Sports Medicine. - : ADIS INT LTD. - 0112-1642 .- 1179-2035.
-
Forskningsöversikt (refereegranskat)abstract
- BackgroundFlywheel resistance training has become more integrated within resistance training programs in a variety of sports due to the neuromuscular, strength, and task-specific enhancements reported with this training.ObjectiveThis paper aimed to present the consensus reached by internationally recognized experts during a meeting on current definitions and guidelines for the implementation of flywheel resistance training technology in sports.MethodsNineteen experts from different countries took part in the consensus process; 16 of them were present at the consensus meeting (18 May 2023) while three submitted their recommendations by e-mail. Prior to the meeting, evidence summaries were developed relating to areas of priority. This paper discusses the available evidence and consensus process from which recommendations were made regarding the appropriate use of flywheel resistance training technology in sports. The process to gain consensus had five steps: (1) performing a systematic review of systematic reviews, (2) updating the most recent umbrella review published on this topic, (3) first round discussion among a sample of the research group included in this consensus statement, (4) selection of research group members-process of the consensus meeting and formulation of the recommendations, and (5) the consensus process. The systematic analysis of the literature was performed to select the most up-to-date review papers available on the topic, which resulted in nine articles; their methodological quality was assessed according to AMSTAR 2 (Assessing the Methodological Quality of Systematic Review 2) and GRADE (Grading Recommendations Assessment Development and Evaluation). Statements and recommendations scoring 7-9 were considered appropriate.ResultsThe recommendations were based on the evidence summary and researchers' expertise; the consensus statement included three statements and seven recommendations for the use of flywheel resistance training technology. These statements and recommendations were anonymously voted on and qualitatively analyzed. The three statements reported a score ranging from 8.1 to 8.8, and therefore, all statements included in this consensus were considered appropriate. The recommendations (1-7) had a score ranging from 7.7 to 8.6, and therefore, all recommendations were considered appropriate.ConclusionsBecause of the consensus achieved among the experts in this project, it is suggested that practitioners and researchers should adopt the guidelines reported in this consensus statement regarding the use of flywheel resistance technology in sports.
|
|
| 7. |
- de Groot, Frank M. F., et al.
(författare)
-
2p x-ray absorption spectroscopy of 3d transition metal systems
- 2021
-
Ingår i: Journal of Electron Spectroscopy and Related Phenomena. - : Elsevier BV. - 0368-2048 .- 1873-2526. ; 249
-
Tidskriftsartikel (refereegranskat)abstract
- This review provides an overview of the different methods and computer codes that are used to interpret 2p x-ray absorption spectra of 3d transition metal ions. We first introduce the basic parameters and give an overview of the methods used. We start with the semi-empirical multiplet codes and compare the different codes that are available. A special chapter is devoted to the user friendly interfaces that have been written on the basis of these codes. Next we discuss the first principle codes based on band structure, including a chapter on Density Functional theory based approaches. We also give an overview of the first-principle multiplet codes that start from a cluster calculation and we discuss the wavefunction based methods, including multi-reference methods. We end the review with a discussion of the link between theory and experiment and discuss the open issues in the spectral analysis.
|
|
| 8. |
- García-Lorenzo, Borja, et al.
(författare)
-
Assessment of the effectiveness, socio-economic impact and implementation of a digital solution for patients with advanced chronic diseases : the ADLIFE study protocol
- 2023
-
Ingår i: International Journal of Environmental Research and Public Health. - : MDPI. - 1661-7827 .- 1660-4601. ; 20:4
-
Tidskriftsartikel (refereegranskat)abstract
- Due to population ageing and medical advances, people with advanced chronic diseases (ACD) live longer. Such patients are even more likely to face either temporary or permanent reduced functional reserve, which typically further increases their healthcare resource use and the burden of care on their caregiver(s). Accordingly, these patients and their caregiver(s) may benefit from integrated supportive care provided via digitally supported interventions. This approach may either maintain or improve their quality of life, increase their independence, and optimize the healthcare resource use from early stages. ADLIFE is an EU-funded project, aiming to improve the quality of life of older people with ACD by providing integrated personalized care via a digitally enabled toolbox. Indeed, the ADLIFE toolbox is a digital solution which provides patients, caregivers, and health professionals with digitally enabled, integrated, and personalized care, supporting clinical decisions, and encouraging independence and self-management. Here we present the protocol of the ADLIFE study, which is designed to provide robust scientific evidence on the assessment of the effectiveness, socio-economic, implementation, and technology acceptance aspects of the ADLIFE intervention compared to the current standard of care (SoC) when applied in real-life settings of seven different pilot sites across six countries. A quasi-experimental trial following a multicenter, non-randomized, non-concurrent, unblinded, and controlled design will be implemented. Patients in the intervention group will receive the ADLIFE intervention, while patients in the control group will receive SoC. The assessment of the ADLIFE intervention will be conducted using a mixed-methods approach.
|
|
| 9. |
- Horber, Veronka, et al.
(författare)
-
Prevalence, Clinical Features, Neuroimaging, and Genetic Findings in Children With Ataxic Cerebral Palsy in Europe
- 2023
-
Ingår i: Neurology. - 0028-3878 .- 1526-632X. ; 101:24
-
Tidskriftsartikel (refereegranskat)abstract
- Background and ObjectivesTo report on prevalence, associated impairments, severity, and neuroimaging findings in children with ataxic cerebral palsy (CP).MethodsIn children coded as having ataxic CP in the Central database of Joint Research Center-Surveillance of Cerebral Palsy in Europe (JRC-SCPE) and born during 1980-2010, birth characteristics, severity profiles including associated impairments, neuroimaging patterns, and the presence of syndromes were analyzed. Definitions were according to validated SCPE guidelines. Prevalence over time was estimated using Poisson regression.ResultsIn total, 679 children with ataxic CP were identified in 20 European CP registers. The proportion with ataxic CP was 3.8% and varied from 0% to 12.9%. Prevalence over time showed no significant trend. Approximately 70% of children with ataxic CP were able to walk, and 40% had severe intellectual impairment and a high impairment index. Children with ataxic CP were mostly born at term (79%) and with normal birth weight (77%). Neuroimaging patterns revealed normal findings in 29%, brain maldevelopments in 28.5%, miscellaneous findings in 23.5%, and brain injuries in 19%, according to the SCPE classification. Genetic syndromes were described in 9%.DiscussionThis register-based multicenter study on children with ataxic CP provides a large sample size for the analysis of prevalence, severity, and origin of this rare CP subtype. Even with strict inclusion and classification criteria, there is variation between registers on how to deal with this subtype, and diagnosis of ataxic CP remains a challenge. Ataxic cerebral palsy differs from other CP subtypes: children with ataxic CP have a disability profile that is more pronounced in terms of cognitive than gross motor dysfunction. They are mostly term born and the origin rarely suggests acquired injuries. In addition to neuroimaging, a comprehensive genetic workup is particularly recommended for children with this CP type.
|
|
| 10. |
|
|
