| 1. |
- Fallqvist, Mikael, et al.
(författare)
-
Nucleation And Growth Of Cvd α-Al2O3 On TiXOY Template
- 2012
-
Ingår i: Surface & Coatings Technology. - : Elsevier. - 0257-8972 .- 1879-3347. ; 207, s. 254-261
-
Tidskriftsartikel (refereegranskat)abstract
- The microstructure, phase and chemical composition of TixOy templates used to nucleate α-Al2O3 on Ti(C,N) coated cemented carbide have been elucidated using scanning electron microscopy, X-ray diffraction, Auger electron spectroscopy and Time-of-Flight Secondary Ion Mass Spectrometry. Further, the adhesive strength of the α-Al2O3–TixOy–Ti(C,N) interfaces was investigated using scratch adhesion testing.The present study confirmed that the as-deposited template consisted of a Ti4O7 phase which during subsequent deposition of the Al2O3 layer transformed to a Ti3O5 phase and that the grown Al2O3 layer consisted of 100% α-Al2O3. Furthermore, the results showed that the lowest interfacial strength within the multilayer structure was exhibited by the Ti(C,N)–TixOy interface and that the transformation of Ti4O7 to Ti3O5 in the template resulted in formation of pores in the Ti(C,N)-template interface lowering the interfacial strength even more. The use of surface analysis techniques such as Auger electron spectroscopy and especially Time-of-Flight Secondary Ion Mass Spectrometry enabled trace element analyses using depth profiling to characterise the thin interfacial layers in detail.
|
|
| 2. |
- Backlund, Sandra, 1986-, et al.
(författare)
-
Energy efficiency potentials and energy management practices in Swedish firms
- 2012
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- In order to improve energy efficiency and reach the EU:s 20-20-20 primary energy saving target, focus has mainly been on diffusion of technology. Previous studies have illustrated large untapped energy saving potentials from implementing energy management practices in firms. Energy management practices have large effects on energy utilization and also a short pay-back time. According to these studies, energy management practices also effect investment decisions and the outcome of investments in energy efficient technologies. This paper investigates to what extent energy management practices influence firms estimation of energy efficiency potentials. Further it investigates two Swedish policy programs that promote industrial energy management practices: The Programme For improving Energy efficiency in energy-intensive industry (PFE) and the energy audit program and whether these have increased energy management practices in Swedish firms. A multiple case study has been conducted in order to investigate energy practices in firms in different industrial sectors. Employment of energy management varies between firms. The firms estimate equal energy efficiency potentials from implementation of energy efficient technology as for energy management practices. In total the firms estimate energy efficiency potentials of 12 %. The study shows that firms that have participated in the programs work more actively with energy management. This can be illustrated by the fact that 75 % of the firms that have not participated in any of the programs lack a person responsible for energy management and 50 % also lack a long term energy strategy. For firms that have participated in the programs the corresponding figures are 30 % and 33 %. The results indicate an untapped potential of energy efficiency measures that could be reached through increased energy management in Swedish industries.
|
|
| 3. |
- Backlund, Sandra, 1986-, et al.
(författare)
-
Extending the Energy efficiency gap
- 2012
-
Ingår i: Energy Policy. - : Elsevier. - 0301-4215 .- 1873-6777. ; 51, s. 392-396
-
Tidskriftsartikel (refereegranskat)abstract
- In order to reach the EU: s 20–20–20 primary energy savings target, energy efficiency needs to increase. Previous research on energy use and energy efficiency has focused mainly on the diffusion of energy efficient technologies. The discrepancy between optimal and actual implementation of energy efficient technologies has been illustrated in numerous articles and is often referred to as the energy efficiency gap. However, efficient technologies are not the only ways to increase energy efficiency. Empirical studies have found that a cost-effective way to improve energy efficiency is to combine investments in energy-efficient technologies with continuous energy management practices. By including energy management into an estimated energy efficiency potential this paper introduces an extended energy efficiency gap, mainly in manufacturing industries and the commercial sector. The inclusion of energy management components in future energy policy will play an important role if the energy savings targets for 2020, and later 2050, are to be met in the EU.
|
|
| 4. |
- Boman, Mats, et al.
(författare)
-
Corrosion of copper in water free from molecular oxygen
- 2014
-
Ingår i: Corrosion Engineering, Science and Technology. - 1478-422X .- 1743-2782. ; 49:6, s. 431-434
-
Tidskriftsartikel (refereegranskat)abstract
- The possibility of copper reacting with O-2-free water has been investigated by analysis of primary corrosion products, as well as by monitoring gas pressure change by time, in long term experiments for up to 6 months in a glove box environment. We establish hydrogen production, but being of the same magnitude irrespective whether copper is present or not. Although low, the hydrogen production rate is considerably larger than what would directly correspond to the amount of analysed copper oxidation products. Our analyses encompass the changes to the surface cleaned copper (99.9999%), the water phase and the Duran glass in contact with the water (ppt quality). We have used very sensitive methods (XPS, AES, ICP-MS, XRF) while keeping contamination risks to a minimum. We conclude that the oxidation rate of copper is very low, yielding only parts of a monolayer of Cu2O after 6 months of exposure at 50 degrees C together with an accompanying very low concentration of copper species (4-5 mu g L-1) in the water phase.
|
|
| 5. |
- Fagerberg, Linn, et al.
(författare)
-
Analysis of the human tissue-specific expression by genome-wide integration of transcriptomics and antibody-based proteomics
- 2014
-
Ingår i: Molecular & Cellular Proteomics. - 1535-9476 .- 1535-9484. ; 13:2, s. 397-406
-
Tidskriftsartikel (refereegranskat)abstract
- Global classification of the human proteins with regards to spatial expression patterns across organs and tissues is important for studies of human biology and disease. Here, we used a quantitative transcriptomics analysis (RNA-Seq) to classify the tissue-specific expression of genes across a representative set of all major human organs and tissues and combined this analysis with antibody- based profiling of the same tissues. To present the data, we launch a new version of the Human Protein Atlas that integrates RNA and protein expression data corresponding to 80% of the human protein-coding genes with access to the primary data for both the RNA and the protein analysis on an individual gene level. We present a classification of all human protein-coding genes with regards to tissue-specificity and spatial expression pattern. The integrative human expression map can be used as a starting point to explore the molecular constituents of the human body.
|
|
| 6. |
- Fallberg, Anna, 1980-
(författare)
-
Chemical Vapour Deposition of Undoped and Oxygen Doped Copper (I) Nitride
- 2010
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- In science and technology there is a steadily increased demand of new materials and new materials production processes since they create new application areas as well as improved production technology and economy. This thesis includes development and studies of a chemical vapour deposition (CVD) process for growth of thin films of the metastable material copper nitride, Cu3N, which is a semiconductor and decomposes at around 300 oC. The combination of these properties opens for a variety of applications ranging from solar cells to sensor and information technology. The CVD process developed is based on a metal-organic compound copper hexafluoroacetylacetonate, Cu(hfac)2 , ammonia and water and was working at about 300 oC and 5 Torr. It was found that a small amount of water in the vapour increased the growth rate considerably and that the phase content, film texture, chemical composition and morphology were strongly dependent on the deposition conditions. In-situ oxygen doping during the CVD of Cu3N to an amount of 9 atomic % could also be accomplished by increasing the water concentration in the vapour. Oxygen doping increases the band gap of the material as well as the electrical resistivity and changes the stability. The crystal structure of Cu3N is very open and contains several sites which can be used for doping. Different spectroscopic techniques like X-ray photoelectron spectroscopy, Raman spectroscopy and near edge X-ray absorption fine structure spectroscopy were used to identify the oxygen doping site(s) in Cu3N. Besides the properties, the oxygen doping also affected the morphology and texture of the films. By combining thin layers of different materials several properties can be optimized at the same time. It has been demonstrated in this thesis that multilayers, composed of alternating Cu3N and Cu2O layers, i.e. a metastable and a stable material, could be grown by CVD technique. However, the stacking sequence affected the texture, morphology and chemical composition. The interfaces between the different layers were sharp and no signs of decomposition of the initially deposited metastable Cu3N layer could be detected.
|
|
| 7. |
- Fallberg, Anna, et al.
(författare)
-
Phase stability and oxygen doping in the Cu-N-O system
- 2010
-
Ingår i: Journal of Crystal Growth. - North Holland : Elsevier. - 0022-0248 .- 1873-5002. ; 312:10, s. 1779-1784
-
Tidskriftsartikel (refereegranskat)abstract
- A growth stability diagram for the system Cu-N-O has been determined in the temperature range 250-500°C for a thermally activated CVD process, based on copper (II) hexafluoroacetylacetonate (Cu(hfac)2), NH3 and H2O. Without any addition of water only Cu3N was obtained. Addition of water introduces oxygen into the Cu3N structure to a maximum amount of 9 atomic % at a water/nitrogen molar ratio of 0.36 at 325 °C. Above this molar ratio Cu2O starts to deposit in addition to an oxygen doped Cu3N phase. Only Cu2O is deposited at a large excess of water. XPS and Raman spectroscopy indicated that the additional oxygen in the doped Cu3N structure occupies an interstitial position with a chemical environment similar to oxygen in Cu2O. The oxygen doping of the Cu3N phase did not influence the lattice parameter which was close to the bulk parameter of 3.814 Å. The film morphology varied markedly with both deposition temperature and water concentration in the vapour during deposition. Increasing the water concentration results in less faceted and textured films with smoother and more sphere like grains. The resistivity of the Cu3N films increased with increased oxygen content of the film and varied between 10-100 Ωcm (0 to 9 atomic% O). The optical band gap increased from 1.25 to 1.45 eV as the oxygen content increased (0 to 9 atomic %).
|
|
| 8. |
- Frankelius, Per, 1966-, et al.
(författare)
-
Green Service Innovation : The role of resource integration and service provision
- 2014
-
Ingår i: Proceedings of the 2014 AMA SERVSIG International Service Research Conference. - 9789609874090
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Purpose: The importance of green services is increasing. The purpose of the research project is to develop a better understanding of the concept “green services” and its relationship to “service innovation”. The research questions are: What factors can define the green services concept? What are the distinctive characteristics of different types of green services? Methodology: A multiple case study approach is used. The cases represent companies having introduced green service innovations. Based on interviews with the innovators and customers different categories of green services are indentified and described. The empirical findings are then analyzed in the light of a literature review. Findings: By combining empirical observations and theory the authors develop a framework for green service innovations. This framework describes how innovation can be attained through emphasizing changes in resource integration (reuse waste, reduce impact on nature and improve nature) and service provision (direct service or indirect service). In this frame six categories of green services are defined: redistribution of resources, changing customer behavior, improving conditions for nature, upcycling, replacement of technology and products to improve nature.Originality/value: The majority of existing research on green service has had focus on the service companies and the change of technology in providing services. The authors here rather emphasize the customer roles, and stresses that these roles need to change to fulfill green service innovation. Moreover, the perspective here is that green services have the ability to not only mitigate negative impact on the environment but also increase the quality of nature. The term “greenovation” is proposed to emphase this.
|
|
| 9. |
- Guyader, Hugo, 1990-, et al.
(författare)
-
Closing the green gap : understanding why green consumers choose brown products
- 2014
-
Ingår i: NRWC 2014 The 4th Nordic Retail and Whole Sale Conference, November 5th to 6th of November, 2014. - : Nordic Retail and Wholesale Association. ; , s. 1-4
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- This study investigates the impact of in-store marketing and packaging elements on green shopping behavior, aiming to further understand the attitude-behavior Green Gap. The results of first, a choice experiment with 127 respondents and second an eye-tracking experiment with 67 respondents show implications for the retail industry.
|
|
| 10. |
|
|
