| 1. |
- Kim, Joon Tae, et al.
(författare)
-
Dual antiplatelet Use for extended period taRgeted to AcuTe ischemic stroke with presumed atherosclerotic OrigiN (DURATION) trial : Rationale and design
- 2023
-
Ingår i: International Journal of Stroke. - : SAGE Publications. - 1747-4930 .- 1747-4949. ; 18:8, s. 1015-1020
-
Tidskriftsartikel (refereegranskat)abstract
- Rationale: The optimal duration of dual antiplatelet therapy (DAPT) with clopidogrel-aspirin for the large artery atherosclerotic (LAA) stroke subtype has been debated. Aims: To determine whether the 1-year risk of recurrent vascular events could be reduced by a longer duration of DAPT in patients with the LAA stroke subtype. Methods and study design: A total of 4806 participants will be recruited to detect a statistically significant relative risk reduction of 22% with 80% power and a two-sided alpha error of 0.05, including a 10% loss to follow-up. This is a registry-based, multicenter, prospective, randomized, open-label, blinded end point study designed to evaluate the efficacy and safety of a 12-month duration of DAPT compared with a 3-month duration of DAPT in the LAA stroke subtype. Patients will be randomized (1:1) to either DAPT for 12 months or DAPT for 3 months, followed by monotherapy (either aspirin or clopidogrel) for the remaining 9 months. Study outcomes: The primary efficacy outcome of the study is a composite of stroke (ischemic or hemorrhagic), myocardial infarction, and all-cause mortality for 1 year after the index stroke. The secondary efficacy outcomes are (1) stroke, (2) ischemic stroke or transient ischemic attack, (3) hemorrhagic stroke, and (4) all-cause mortality. The primary safety outcome is major bleeding. Discussion: This study will help stroke physicians determine the appropriate duration of dual therapy with clopidogrel-aspirin for patients with the LAA stroke subtype. Trial registration: URL: https://cris.nih.go.kr/cris. CRIS Registration Number: KCT0004407.
|
|
| 2. |
- Fenstermacher, M.E., et al.
(författare)
-
DIII-D research advancing the physics basis for optimizing the tokamak approach to fusion energy
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L-H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ∼8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.
|
|
| 3. |
- Lee, Taewoong, et al.
(författare)
-
Dye-functionalized carbonaceous interlayer as an efficient lithium polysulfide mediator for high performance lithium-sulfur batteries
- 2024
-
Ingår i: Applied Surface Science. - : ELSEVIER. - 0169-4332 .- 1873-5584. ; 649
-
Tidskriftsartikel (refereegranskat)abstract
- Lithium - sulfur (Li-S) batteries with their high theoretical energy density and abundant resources have been considered as a promising candidate for next-generation energy storage systems. Nonetheless, undesirable diffusion of lithium polysulfides (LiPSs) toward the lithium metal anode in electrolytes during discharge/charge cycles of Li-S batteries, which is known as shuttle behavior of LiPSs, degrades the long-term stability of Li-S batteries and limits their practical applications. Herein, we present dye-functionalized carbonaceous interlayer, in which organic dye containing nitrogen and sulfur functional groups are incorporated into the carbon matrix of a graphitic layer via hydrothermal process. The introduction of such functional interlayer in Li-S batteries reveals that the carbon matrix with various heteroatom moieties can create physically/chemically favorable active sites for trapping LiPSs and enhance LiPSs conversion toward insoluble products of Li2S/Li2S2, resulting in excellent rate capability and long-term stability with high coulombic efficiency. This study emphasizes the potential of organic dyes functionalization and demonstrates enhanced LiPSs conversion and long-term stability of Li-S batteries.
|
|
| 4. |
- Park, Sung-Joon, et al.
(författare)
-
Autonomous Interfacial Assembly of Polymer Nanofilms via Surfactant-Regulated Marangoni Instability
- 2023
-
Ingår i: Nano Letters. - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 23:11, s. 4822-4829
-
Tidskriftsartikel (refereegranskat)abstract
- Interfacialpolymerization (IP) provides a versatile platform forfabricating defect-free functional nanofilms for various applications,including molecular separation, energy, electronics, and biomedicalmaterials. Unfortunately, coupled with complex natural instabilityphenomena, the IP mechanism and key parameters underlying the structuralevolution of nanofilms, especially in the presence of surfactantsas an interface regulator, remain puzzling. Here, we interfaciallyassembled polymer nanofilm membranes at the free water-oilinterface in the presence of differently charged surfactants and comprehensivelycharacterized their structure and properties. Combined with computationalsimulations, an in situ visualization of interfacial film formationdiscovered the critical role of Marangoni instability induced by thesurfactants via various mechanisms in structurally regulating thenanofilms. Despite their different instability-triggering mechanisms,the delicate control of the surfactants enabled the fabrication ofdefect-free, ultra-permselective nanofilm membranes. Our study identifiescritical IP parameters that allow us to rationally design nanofilms,coatings, and membranes for target applications.
|
|
| 5. |
- Asami, Jinta, et al.
(författare)
-
Structural basis of hepatitis B virus receptor binding
- 2024
-
Ingår i: Nature Structural & Molecular Biology. - 1545-9993 .- 1545-9985. ; 31, s. 447-454
-
Tidskriftsartikel (refereegranskat)abstract
- Hepatitis B virus (HBV), a leading cause of developing hepatocellular carcinoma affecting more than 290 million people worldwide, is an enveloped DNA virus specifically infecting hepatocytes. Myristoylated preS1 domain of the HBV large surface protein binds to the host receptor sodium-taurocholate cotransporting polypeptide (NTCP), a hepatocellular bile acid transporter, to initiate viral entry. Here, we report the cryogenic-electron microscopy structure of the myristoylated preS1 (residues 2–48) peptide bound to human NTCP. The unexpectedly folded N-terminal half of the peptide embeds deeply into the outward-facing tunnel of NTCP, whereas the C-terminal half formed extensive contacts on the extracellular surface. Our findings reveal an unprecedented induced-fit mechanism for establishing high-affinity virus–host attachment and provide a blueprint for the rational design of anti-HBV drugs targeting virus entry.
|
|
| 6. |
- Choi, Nuri, et al.
(författare)
-
Influence of Manufacturing Conditions on Inclusion Characteristics and Mechanical Properties of FeCrNiMnCo Alloy
- 2020
-
Ingår i: Metals. - : MDPI. - 2075-4701. ; 10:10
-
Tidskriftsartikel (refereegranskat)abstract
- Three CoCrFeMnNi high-entropy alloys (HEAs) were produced by vacuum induction melting, induction melting under inert gas atmosphere, and melting under inert gas atmosphere followed by air exposure, respectively. The different manufacturing conditions for the three investigated alloys resulted in different levels and types of inclusions. The alloys melted under vacuum or inert gas contained Al2O3 inclusions formed by impurity Al, due to its high oxidation tendency. The molten alloy exposed in air showed an excessive oxidation. During oxidation of the molten alloy in air, impurity Al was initially oxidized, and fine MnCr2O4 inclusions were formed rather than pure Al2O3 inclusions. This difference was analyzed based on thermodynamic calculations. Specifically, the influence of impurity content on the inclusion characteristics was investigated for the three HEAs. Moreover, the inclusion characteristics were found to have an influence on mechanical properties of the alloys also. In air-exposed HEA, smaller inclusions were formed, resulting in a higher dislocation density at the matrix/inclusion interface and thus strengthening of the HEA. Thus, it is proposed that atmospheric conditions could be an important factor to control the inclusion characteristics and to form fine inclusion particles, which could improve the mechanical properties of HEAs.
|
|
| 7. |
- Kim, Bokyeong, et al.
(författare)
-
Decoupled Address Translation for Heterogeneous Memory Systems
- 2020
-
Ingår i: PACT '20. - New York, NY, USA : ASSOC COMPUTING MACHINERY. - 9781450380751 ; , s. 155-156
-
Konferensbidrag (refereegranskat)abstract
- The support for the heterogeneous memory in the conventional virtual memory has an inherent problem. For the efficient translation in the critical translation lookaside buffers (TLBs), the page size has been growing. However, the heterogeneous memory management requires a nimble fine-grained migration mechanism to quickly move necessary memory portions to the precious fast memory. To address the challenges posed by the conflicting goals in the heterogeneous memory support, this paper proposes to decouple the address translation into a two-step process. The decoupling resolves the conflict as the critical core-side TLBs perform the translation to an intermediate address space, and the memory-side translation provides the actual physical location of the memory devices.
|
|
| 8. |
- Kim, Bokyeong, et al.
(författare)
-
Supporting Dynamic Translation Granularity for Hybrid Memory Systems
- 2022
-
Ingår i: 2022 IEEE 40th International Conference on Computer Design (ICCD). - : Institute of Electrical and Electronics Engineers (IEEE). - 9781665461863 - 9781665461870 ; , s. 25-32
-
Konferensbidrag (refereegranskat)abstract
- Hybrid memory has become a promising new solution for meeting ever growing memory capacity demands in a cost-effective way. In hybrid memory systems, the fast and high bandwidth memory is used to store performance-critical data, while the slow and low bandwidth memory provides capacity backup. In supporting such hybridization, virtual memory is the key mechanism, which can combine different memory components to a single memory view. For efficient translation for virtual memory, page size has been growing. However, the hybrid memory support requires fine-grained migration to quickly move only necessary memory portions to the precious fast memory. To address the challenges posed by the conflicting goals in the hybrid memory support based on virtual memory, this paper investigates decoupling of address translation into a two-step process. With the two-level translation, the critical core-side TLBs perform the translation to an intermediate address space, and the memory-side translation provides the actual physical location in memory devices. As the second-level translation handling page migration across different memory types, is decoupled from the first-level translation, it allows dynamic adjustment of its mapping granularity to improve the efficiency of translation and data reuse in the fast memory. This paper proposes a hardware architecture which identifies the memory access behavior of an application online and selects the best mapping granularity for the second-level translation.
|
|
| 9. |
- Kim, D. H., et al.
(författare)
-
Improving the production efficiency of high-titania slag in Ti extraction process : fluxing effect on formation of pseudobrookite
- 2020
-
Ingår i: Scientific Reports. - : Nature Research. - 2045-2322. ; 10:1
-
Tidskriftsartikel (refereegranskat)abstract
- We investigated the carbothermic reduction process of ilmenite ore at 1873 K with flux addition. Without flux, the pseudobrookite phase with a high melting temperature was precipitated during ilmenite smelting. This could be the main reason for decreased reduction of iron in ilmenite. To accelerate reduction of ilmenite, two factors were considered. One is increasing the reduction driving force during smelting. Activity of FeO is the major factor to control reduction in driving force. The other factor is delay in formation of the pseudobrookite phase, a high-melting point precipitation phase. In this system, MgO in ilmenite could be used to form pseudobrookite. To control these factors, in this study, flux agent (i.e., Na2O or SiO2) addition was considered. The thermochemical simulation program, FactSageTM7.0 was used to calculate the viscosity of slag and the activity of components as fluxing agents were added. High-temperature experiments using an induction furnace were also conducted to confirm the computational results. To determine the composition of final products, i.e., titanium slag, X-ray fluorescence analysis was executed. As a result of Fe and Ti behaviours in slag, SiO2 addition showed no significant difference from the slag without flux. However, Fe reduction in ilmenite, i.e. TiO2-enrichment, was more accelerated when Na2O was added. X-ray diffraction, scanning electron microscopic and transmission electron microscopic analyses results also showed that even 1 wt% Na2O addition significantly influenced the titanium slag production compared to no flux addition.
|
|
| 10. |
- Kwon, Hyuk Sung, et al.
(författare)
-
Early increment of soluble triggering receptor expressed on myeloid cells 2 in plasma might be a predictor of poor outcome after ischemic stroke
- 2020
-
Ingår i: Journal of clinical neuroscience. - : ELSEVIER SCI LTD. - 0967-5868 .- 1532-2653. ; 73, s. 215-218
-
Tidskriftsartikel (refereegranskat)abstract
- Soluble triggering receptor expressed on myeloid cells 2 (sTREM2) is derived from cleavage of TREM2, which is expressed on the cell surface of microlgia and other tissue-specific macrophages. In the present study, the changes in the sTREM2 levels after ischemic stroke (IS) and their association with clinical outcomes were evaluated. A total of 43 patients diagnosed with non-cardioembolic IS between June 2011 and May 2014 were consecutively included in this study. Patients treated with intravenous thrombolysis or intra-arterial thrombectomy were excluded. Plasma samples were collected three times (days 1, 7, and 90) after ictus. The sTREM2 level was measured in the samples using the highly sensitive solid-phase proximity ligation assay (SP-PLA). Among the 43 subjects, higher initial NIH stroke scale (NIHSS) score (P = 0.005), early increment of sTREM2 (P < 0.001), and late decrement of sTREM2 (P = 0.002), were more common in patients with poor outcome. Based on multivariate analysis, initial NIHSS score (P = 0.015) and early increment of sTREM2 (P = 0.032) were independently associated with poor outcome. The results from the present study indicate that increment of sTREM2 level at the early phase was a predictor of poor outcome. Serial follow-up of sTREM2 may aid prognosis after stroke.
|
|
