| 1. |
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
- Moberg, Christina, et al.
(författare)
-
De unga gör helt rätt när de stämmer staten
- 2022
-
Ingår i: Aftonbladet. - 1103-9000.
-
Tidskriftsartikel (populärvet., debatt m.m.)abstract
- 1 620 forskare och lärare i forskarvärlden: Vi ställer oss bakom Auroras klimatkrav
|
|
| 5. |
|
|
| 6. |
- Booij, Ronald, et al.
(författare)
-
Assessment of visibility of bone structures in the wrist using normal and half of the radiation dose with photon-counting detector CT
- 2023
-
Ingår i: European Journal of Radiology. - : ELSEVIER IRELAND LTD. - 0720-048X .- 1872-7727. ; 159
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: To quantitatively and qualitatively assess the visibility of bone structures in the wrist on photon-counting detector computed tomography (PCD-CT) images compared to state-of-the-art energy-integrating de-tector CT (EID-CT).Method: Four human cadaveric wrist specimens were scanned with EID-CT and PCD-CT at identical CTDIvolof 12.2 mGy and with 6.1 mGy (half dose PCD-CT). Axial images were reconstructed using the thinnest possible slice thickness, i.e. 0.4 mm on EID-CT and 0.2 mm on PCD-CT, with the largest image matrix size possible using reconstruction kernels optimized for bone (EID-CT: Ur68, PCD-CT: Br92). Quantitative evaluation was performed to determine contrast-noise ratio (CNR) of bone/ fat, cortical and trabecular sharpness. An observer study using visual grading characteristics (VGC) analysis was performed by six observers to assess the visibility of nutrient canals, trabecular architecture, cortical bone and the general image quality.Results: At equal dose, images obtained with PCD-CT had 39 +/- 6 % lower CNR (p = 0.001), 71 +/- 57 % higher trabecular sharpness in the radius (p = 0.02) and 42 +/- 8 % (p < 0.05) sharper cortical edges than those obtained with EID-CT. This was confirmed by VGC analysis showing a superior visibility of nutrient canals, trabeculae and cortical bone area under the curve (AUC) > 0.89) for PCD-CT, even at half dose.Conclusions: Despite a lower CNR and increased noise, the trabecular and cortical sharpness were twofold higher with PCD-CT. Visual grading analysis demonstrated superior visibility of cortical bone, trabeculae, nutrient canals and an overall improved image quality with PCD-CT over EID-CT. At half dose, PCD-CT also yielded superior image quality, both in quantitative measures and as evaluated by radiologists.
|
|
| 7. |
- Boswinkel, Milou, et al.
(författare)
-
Utilizing MRI, [18F]FDG-PET and [89Zr]Zr-DFO-28H1 FAP-PET tracer to assess inflammation and fibrogenesis in a reproducible lung injury rat model : a multimodal imaging study
- 2023
-
Ingår i: Frontiers in Nuclear Medicine. - 2673-8880. ; 3
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: Accurate imaging biomarkers that indicate disease progression at an early stage are highly important to enable timely mitigation of symptoms in progressive lung disease. In this context, reproducible experimental models and readouts are key. Here, we aim to show reproducibility of a lung injury rat model, by inducing disease and assessing disease progression by multi-modal non-invasive imaging techniques at two different research sites. Furthermore, we evaluated the potential of fibroblast activating protein (FAP) as an imaging biomarker in the early stage of lung fibrosis. Methods: An initial lung injury rat model was set up at one research site (Lund University, Lund, Sweden) and repeated at a second site (Radboudumc, Nijmegen, The Netherlands). To induce lung injury, Sprague-Dawley rats received intratracheal instillation of bleomycin as one single dose (1,000 iU in 200 µL) or saline as control. Thereafter, longitudinal images were acquired to track inflammation in the lungs, at 1 and 2 weeks after the bleomycin challenge by magnetic resonance imaging (MRI) and [18F]FDG-PET. After the final [18F]FDG-PET scan, rats received an intravenous tracer [89Zr]Zr-DFO-28H1 (anti-FAP antibody) and were imaged at day 15, to track fibrogenesis. Upon termination, bronchoalveolar lavage (BAL) was performed to assess cell and protein concentration. Subsequently, the biodistribution of [89Zr]Zr-DFO-28H1 was measured ex vivo and the spatial distribution in lung tissue was studied by autoradiography. Lung sections were stained, and fibrosis assessed using the modified Ashcroft score. Results: Bleomycin-challenged rats showed body weight loss and increased numbers of immune cells and protein concentrations after BAL compared with control animals. The initiation and progression of the disease were reproduced at both research sites. Lung lesions in bleomycin-exposed rats were visualized by MRI and confirmed by histology. [18F]FDG uptake was higher in the lungs of bleomycin-challenged rats compared with the controls, similar to that observed in the Lund study. [89Zr]Zr-DFO-28H1 tracer uptake in the lung was increased in bleomycin-challenged rats compared with control rats (p = 0.03). Conclusion: Here, we demonstrate a reproducible lung injury model and monitored disease progression using conventional imaging biomarkers MRI and [18F]FDG-PET. Furthermore, we showed the first proof-of-concept of FAP imaging. This reproducible and robust animal model and imaging experimental set-up allows for future research on new therapeutics or biomarkers in lung disease.
|
|
| 8. |
- Broekman, Maarten J. E., et al.
(författare)
-
Evaluating expert-based habitat suitability information of terrestrial mammals with GPS-tracking data
- 2022
-
Ingår i: Global Ecology and Biogeography. - : Wiley. - 1466-822X .- 1466-8238. ; 31:8, s. 1526-1541
-
Tidskriftsartikel (refereegranskat)abstract
- Aim: Macroecological studies that require habitat suitability data for many species often derive this information from expert opinion. However, expert-based information is inherently subjective and thus prone to errors. The increasing availability of GPS tracking data offers opportunities to evaluate and supplement expert-based information with detailed empirical evidence. Here, we compared expert-based habitat suitability information from the International Union for Conservation of Nature (IUCN) with habitat suitability information derived from GPS-tracking data of 1,498 individuals from 49 mammal species.Location: Worldwide.Time period: 1998-2021.Major taxa studied: Forty-nine terrestrial mammal species.Methods: Using GPS data, we estimated two measures of habitat suitability for each individual animal: proportional habitat use (proportion of GPS locations within a habitat type), and selection ratio (habitat use relative to its availability). For each individual we then evaluated whether the GPS-based habitat suitability measures were in agreement with the IUCN data. To that end, we calculated the probability that the ranking of empirical habitat suitability measures was in agreement with IUCN's classification into suitable, marginal and unsuitable habitat types.Results: IUCN habitat suitability data were in accordance with the GPS data (> 95% probability of agreement) for 33 out of 49 species based on proportional habitat use estimates and for 25 out of 49 species based on selection ratios. In addition, 37 and 34 species had a > 50% probability of agreement based on proportional habitat use and selection ratios, respectively.Main conclusions: We show how GPS-tracking data can be used to evaluate IUCN habitat suitability data. Our findings indicate that for the majority of species included in this study, it is appropriate to use IUCN habitat suitability data in macroecological studies. Furthermore, we show that GPS-tracking data can be used to identify and prioritize species and habitat types for re-evaluation of IUCN habitat suitability data.
|
|
| 9. |
- Candefjord, Stefan, 1981, et al.
(författare)
-
A wearable microwave instrument can detect and monitor traumatic abdominal injuries in a porcine model
- 2021
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322 .- 2045-2322. ; 11:1
-
Tidskriftsartikel (refereegranskat)abstract
- Abdominal injury is a frequent cause of death for trauma patients, and early recognition is essential to limit fatalities. There is a need for a wearable sensor system for prehospital settings that can detect and monitor bleeding in the abdomen (hemoperitoneum). This study evaluates the potential for microwave technology to fill that gap. A simple prototype of a wearable microwave sensor was constructed using eight antennas. A realistic porcine model of hemoperitoneum was developed using anesthetized pigs. Ten animals were measured at healthy state and at two sizes of bleeding. Statistical tests and a machine learning method were used to evaluate blood detection sensitivity. All subjects presented similar changes due to accumulation of blood, which dampened the microwave signal (p< 0.05). The machine learning analysis yielded an area under the receiver operating characteristic (ROC) curve (AUC) of 0.93, showing 100% sensitivity at 90% specificity. Large inter-individual variability of the healthy state signal complicated differentiation of bleedings from healthy state. A wearable microwave instrument has potential for accurate detection and monitoring of hemoperitoneum, with automated analysis making the instrument easy-to-use. Future hardware development is necessary to suppress measurement system variability and enable detection of smaller bleedings.
|
|
| 10. |
- Ferm, Lisa, 1984-
(författare)
-
Vocational Students’ Agency in Identity Formation as Industrial Workers
- 2021
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The overall aim of this thesis is to contribute knowledge about vocational identity formation among students within the industrial programme in Swedish upper secondary education, with a particular focus on their workplace-based learning. To break down the aim, three research questions have been formulated and each is addressed in one or two specific articles. These questions are: (1) What learning strategies do vocational students use to become part of a work community, and how do these strategies relate to the formation of a vocational identity at the workplace? (2) How do vocational students experience their identity formation in relation to a vocation within the industrial sector? (3) How do vocational students handle the division between theoretical and practical knowledge as they learn to become skilled industrial workers? The thesis builds on 53 semi-structured qualitative interviews with Swedish upper secondary vocational students enrolled on the industrial programme. The interviews revolve around the students’ vocational identity formation, with a focus on their workplace-based learning. The students are between 18 and 20 years old and the majority are boys. The findings are analysed through the theoretical lens of situated learning, where identity formation is viewed as a social learning process that takes place through participation in communities of practice. In addition, the concepts of habitus, gender and social categorisation are used as analytical tools to provide a deeper understanding of issues concerning status, power and exclusion in relation to vocational identity formation. The findings reveal that the students’ vocational identity formation is closely connected to the social aspects of participating in workplace communities. Knowledge about the jargon and social norms of the workplace seem to be of more importance for vocational identity formation than knowledge about the concrete working tasks. The study follows the students’ vocational identity formation throughout their vocational learning trajectories, which reveal that vocational identities are formed in heterogenic ways. The students may adopt a committed, flexible or ambivalent approach towards industrial work. Aspects concerning agency and status seem to be crucial for the vocational identification process. The forming of a vocational identity also implies positioning oneself in the hierarchy and division between theoretical and practical knowledge, as well as between masculinity and femininity. The students appear as knowledgeable actors who are aware of the generally low status of industrial work, while simultaneously expressing a great deal of pride in relation to their intended vocations. In the discussion, a model of the students’ vocational identity formation is proposed to capture the interplay between collective and structural dimensions (e.g. social background, class and status hierarchies at school) and students’ agency and strategies in becoming industrial workers. From the findings of this thesis, three main conclusions are drawn: (1) The students form vocational identities through using vocational agency in actively developing strategies for becoming accepted in the workplace community; (2) Workplace-based learning is central for the students’ vocational identity formation, in spite of the relatively short time that the students spend there, compared to the time spent at school; (3) The students’ vocational image awareness, expressed through awareness of, and reactions to, other people’s images of their vocation, constitutes an important part of their vocational identity formation.
|
|
