| 1. |
- Svensson, Johannes, et al.
(författare)
-
Increased absorption in InAsSb nanowire clusters through coupled optical modes
- 2017
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 110:8
-
Tidskriftsartikel (refereegranskat)abstract
- Nanowires can act as efficient light absorbers where waveguide modes are resonant to specific wavelengths. This resonant wavelength can easily be tuned by the nanowire dimensions, but the absorption of infrared radiation requires diameters of hundreds of nm, which is difficult to achieve using epitaxial growth. Here, we demonstrate that infrared absorption in InAsSb nanowires with the diameters of only 140 nm grown on Si substrates can be enhanced resonantly by placing them closely packed in clusters of different sizes. We find that coating the nanowires with a dielectric to optically connect them results in an efficient absorption diameter far exceeding the diameter of the constituent nanowires and that the cut-off wavelength is redshifted with an increasing cluster diameter. Numerical simulations are in agreement with the experimental results and demonstrate that if nanowires are positioned in clusters, a peak absorptance of 20% is possible at 5.6 μm with only 3% surface coverage. This absorptance is 200 times higher than for wires placed in an equidistant pattern. Our findings have direct implications for the design of efficient nanowire based photodetectors and solar cells.
|
|
| 2. |
- Aghaeipour, Mahtab, et al.
(författare)
-
Comparative study of absorption efficiency of inclined and vertical InP nanowires
- 2017
-
Ingår i: Physics, Simulation, and Photonic Engineering of Photovoltaic Devices VI. - Bellingham, WA : SPIE - International Society for Optical Engineering. - 9781510606401 ; 10099
-
Konferensbidrag (refereegranskat)abstract
- Geometrically designed III-V nanowire arrays are promising candidates for optoelectronics due to their possibility to excite nanophotonic resonances in absorption spectra. Strong absorption resonances can be obtained by proper tailoring of nanowire diameter, length and pitch. Such enhancement of the light absorption is, however, accompanied by undesired resonance dips at specific wavelengths. In this work, we theoretically show that tilting of the nanowires mitigates the absorption dips by exciting strong Mie resonances. In particular, we derive a theoretical optimum inclination angle of about 30 degrees at which the inclined nanowires gain 8% in absorption efficiency compared to vertically standing nanowires in a spectral region matching the intensity distribution of the sun. The enhancement is due to engineering the excited modes inside the nanowires regarding the symmetry properties of the nanowire/light system without increasing the absorbing material. We expect our results to be important for nanowire-based photovoltaic applications. © 2017 SPIE.
|
|
| 3. |
- Aghaeipour, Mahtab, et al.
(författare)
-
Considering symmetry properties of inp nanowire/light incidence systems to gain broadband absorption
- 2017
-
Ingår i: IEEE Photonics Journal. - Piscataway : IEEE. - 1943-0655. ; 9:3
-
Tidskriftsartikel (refereegranskat)abstract
- Geometrically designed III-V nanowire arrays are promising candidates for disruptive optoelectronics due to the possibility of obtaining a strongly enhanced absorption resulting from nanophotonic resonance effects. With normally incident light on such vertical nanowire arrays, the absorption spectra exhibit peaks that originate from excitation of HE1m waveguide modes in the constituent nanowires. However, the absorption spectra typically show dips between the absorption peaks. Conventionally, such weak absorption has been counteracted by either making the nanowires longer or by decreasing the pitch of the array, both alternatives effectively increasing the volume of absorbing material in the array. Here, we first study two approaches for compensating the absorption dips by exciting additional Mie resonances: 1) oblique light incidence on vertical InP nanowire arrays and 2) normal light incidence on inclined InP nanowire arrays. We then show that branched nanowires offer a novel route to achieve broadband absorption by taking advantage of simultaneous excitations of Mie resonances in the branches and guided HE1m modes in the stem. Finite element method calculations show that the absorption efficiency is enhanced from 0.72 for vertical nanowires to 0.78 for branched nanowires under normal light incidence. Our work provides new insight for the development of novel efficient photovoltaics with high efficiency and reduced active material volume.
|
|
| 4. |
- Aghaeipour, Mahtab, et al.
(författare)
-
Optical response of wurtzite and zinc blende GaP nanowire arrays
- 2015
-
Ingår i: Optics Express. - 1094-4087. ; 23:23, s. 30177-30187
-
Tidskriftsartikel (refereegranskat)abstract
- We compare the optical response of wurtzite and zinc blende GaP nanowire arrays for varying geometry of the nanowires. We measure reflectance spectra of the arrays and extract from these measurements the absorption in the nanowires. To support our experimental findings and to allow for more detailed investigations of the optical response of the nanowire arrays than possible in experiments, we perform electromagnetic modeling. This modeling highlights the validity of the extraction of the absorptance from reflectance spectra, as well as limitations of the extraction due to anti-reflection properties of the nanowires. In our combined experimental and theoretical study, we find for both zinc blende and wurtzite nanowires an absorption resonance that can be tuned into the ultraviolet by decreasing the diameter of the nanowires. This peak stops blue-shifting with decreasing nanowire diameter at a wavelength of approximately 330 nm for zinc blende GaP. In contrast, for the wurtzite GaP nanowires, the resonance continues blue-shifting at 310 nm for the smallest diameters we succeeded in fabricating. We interpret this as a difference in refractive index between wurtzite and zinc blende GaP in this wavelength region. These results open up for optical applications through resonant absorption in the visible and ultraviolet wavelength regions with both zinc blende and wurtzite GaP nanowire arrays. Notably, zinc blende and wurtzite GaP support resonant absorption deeper into the ultraviolet region than previously found for zinc blende and wurtzite InP and InAs. (C) 2015 Optical Society of America
|
|
| 5. |
- Aghaeipour, Mahtab
(författare)
-
Tailoring the Optical Response of III-V Nanowire Arrays
- 2017
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Semiconductor nanowires show a great deal of promise for applications in a wide range of important fields, including photovoltaics, biomedicine, and information technology. Developing these exciting applications is strongly dependent on understanding the fundamental properties of nanowires, such as their optical resonances and absorption spectra. In this thesis we explore optical absorption spectra of arrays of vertical III-V nanowires with a special emphasis on structures optimized to enhance absorption in the solar spectrum. First, we analyze experimentally determined absorption spectra of both indium phosphide (InP) and gallium phosphide (GaP) nanowire arrays. The study provides an intuitive understanding of how the observed absorption resonances in the nanowires may be tuned as a function of their geometrical parameters and crystal structure. As a consequence, the spectral position of absorption resonances can be precisely controlled through the nanowire diameter. However, the results highlight how the blue-shift in the optical absorption resonances as the diameter of the nanowires decreases comes to a halt at low diameters. The stop point is related to the behavior of the refractive indices of the nanowires. The wavelength of the stop is different for nanowire polytypes of similar dimensions due to differences in their refractive indices. We then present a theoretical argument that it is important to consider symmetry properties when tailoring the optical modes excited in the nanowires for enhanced absorption. We show that absorption spectra may be enhanced compared to vertical nanowires at normal incidence by tilting the nanowires with normal incidence light, or by using off-normal incidence with vertical nanowires. This is because additional optical modes inside the nanowires are excited when the symmetry is broken. Looking forward to omnidirectional applications, we consider branched nanowires as a way to enhance the absorption spectra at normal incidence by taking advantage of simultaneous excitation of the spectrally different optical modes in the branches and the stems. Third, we describe in theoretical terms how integrating distributed Bragg reflectors (DBRs) with the nanowires can improve absorption spectra compared to conventional nanowires. DBRs provide a way to employ light trapping mechanisms which increases the optical path length of the excited modes and thereby improves the absorption of the excited modes. At normal incidence, DBR-nanowires improve the absorption efficiency to 78%, compared to 72% for conventional nanowires. We show that the efficiency is increased to 85% for an off-normal incident angle of 50˚. Overall, our results show that studies of optical resonances in nanowires that take the light-matter interaction into account provide opportunities to develop novel optical and optoelectronic functionalities in nanoscience and nanotechnology.
|
|
| 6. |
- Berg, Alexander, et al.
(författare)
-
Growth of wurtzite AlxGa1-xP nanowire shells and characterization by Raman spectroscopy
- 2017
-
Ingår i: Nanotechnology. - : IOP Publishing. - 0957-4484 .- 1361-6528. ; 28:3
-
Tidskriftsartikel (refereegranskat)abstract
- The phonon energies of AlGaP in wurtzite crystal structure are generally not known, as opposed to their zincblende counterparts, because AlGaP crystallizes in zincblende phase in bulk and thin films structures. However, in nanowires AlGaP can be grown in wurtzite crystal structure. In this work we have grown wurtzite GaP/AlGaP/GaP core-shell nanowires by use of MOVPE. After developing suitable growth conditions, the Al composition was determined by STEM-EDX measurements and the wurtzite AlGaP phonon energies by Raman spectroscopy. Raman measurements show a peak shift with increasing Al composition in the AlGaP shell. We find that the phonon energies for wurtzite AlGaP are slightly lower than for zincblende AlGaP. Our results can be used to determine the Al composition in wurtzite AlGaP by Raman scattering.
|
|
| 7. |
- Chen, Yang, et al.
(författare)
-
Design for strong absorption in a nanowire array tandem solar cell
- 2016
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 6
-
Tidskriftsartikel (refereegranskat)abstract
- Semiconductor nanowires are a promising candidate for next-generation solar cells. However, the optical response of nanowires is, due to diffraction effects, complicated to optimize. Here, we optimize through optical modeling the absorption in a dual-junction nanowire-array solar cell in terms of the Shockley-Quessier detailed balance efficiency limit. We identify efficiency maxima that originate from resonant absorption of photons through the HE11 and the HE12 waveguide modes in the top cell. An efficiency limit above 40% is reached in the band gap optimized Al0.10Ga0.90As/In0.34Ga0.66As system when we allow for different diameter for the top and the bottom nanowire subcell. However, for experiments, equal diameter for the top and the bottom cell might be easier to realize. In this case, we find in our modeling a modest 1–2% drop in the efficiency limit. In the Ga0.51In0.49P/InP system, an efficiency limit of η = 37.3% could be reached. These efficiencies, which include reflection losses and sub-optimal absorption, are well above the 31.0% limit of a perfectly-absorbing, idealized single-junction bulk cell, and close to the 42.0% limit of the idealized dual-junction bulk cell. Our results offer guidance in the choice of materials and dimensions for nanowires with potential for high efficiency tandem solar cells.
|
|
| 8. |
- Chen, Yang, et al.
(författare)
-
One-dimensional electrical modeling of axial p-i-n junction InP nanowire array solar cells
- 2017
-
Ingår i: 17th International Conference on Numerical Simulation of Optoelectronic Devices, NUSOD 2017. - 9781509053230 ; , s. 23-24
-
Konferensbidrag (refereegranskat)abstract
- We demonstrate one-dimensional (1D) electrical modeling of InP nanowire array solar cells. This 1D modeling gives accurate description of the current voltage response even at high surface recombination velocity. The 1D electrical model decreases the simulation time by 3 orders of magnitude compared to a full three-dimensional (3D) model.
|
|
| 9. |
- Chen, Yang, et al.
(författare)
-
Optical analysis of a III-V-nanowire-array-on-Si dual junction solar cell
- 2017
-
Ingår i: Optics Express. - 1094-4087. ; 25:16, s. 665-679
-
Tidskriftsartikel (refereegranskat)abstract
- A tandem solar cell consisting of a III-V nanowire subcell on top of a planar Si subcell is a promising candidate for next generation photovoltaics due to the potential for high efficiency. However, for success with such applications, the geometry of the system must be optimized for absorption of sunlight. Here, we consider this absorption through optics modeling. Similarly, as for a bulk dual-junction tandem system on a silicon bottom cell, a bandgap of approximately 1.7 eV is optimum for the nanowire top cell. First, we consider a simplified system of bare, uncoated III-V nanowires on the silicon substrate and optimize the absorption in the nanowires. We find that an optimum absorption in 2000 nm long nanowires is reached for a dense array of approximately 15 nanowires per square micrometer. However, when we coat such an array with a conformal indium tin oxide (ITO) top contact layer, a substantial absorption loss occurs in the ITO. This ITO could absorb 37% of the low energy photons intended for the silicon subcell. By moving to a design with a 50 nm thick, planarized ITO top layer, we can reduce this ITO absorption to 5%. However, such a planarized design introduces additional reflection losses. We show that these reflection losses can be reduced with a 100 nm thick SiO2 anti-reflection coating on top of the ITO layer. When we at the same time include a Si3N4 layer with a thickness of 90 nm on the silicon surface between the nanowires, we can reduce the average reflection loss of the silicon cell from 17% to 4%. Finally, we show that different approximate models for the absorption in the silicon substrate can lead to a 15% variation in the estimated photocurrent density in the silicon subcell.
|
|
| 10. |
- Chen, Yang, et al.
(författare)
-
Optimization of the short-circuit current in an InP nanowire array solar cell through opto-electronic modeling
- 2016
-
Ingår i: Nanotechnology. - : IOP Publishing. - 0957-4484 .- 1361-6528. ; 27:43
-
Tidskriftsartikel (refereegranskat)abstract
- InP nanowire arrays with axial p-i-n junctions are promising devices for next-generation photovoltaics, with a demonstrated efficiency of 13.8%. However, the short-circuit current in such arrays does not match their absorption performance. Here, through combined optical and electrical modeling, we study how the absorption of photons and separation of the resulting photogenerated electron-hole pairs define and limit the short-circuit current in the nanowires. We identify how photogenerated minority carriers in the top n segment (i.e. holes) diffuse to the ohmic top contact where they recombine without contributing to the short-circuit current. In our modeling, such contact recombination can lead to a 60% drop in the short-circuit current. To hinder such hole diffusion, we include a gradient doping profile in the n segment to create a front surface barrier. This approach leads to a modest 5% increase in the short-circuit current, limited by Auger recombination with increased doping. A more efficient approach is to switch the n segment to a material with a higher band gap, like GaP. Then, a much smaller number of holes is photogenerated in the n segment, strongly limiting the amount that can diffuse and disappear into the top contact. For a 500 nm long top segment, the GaP approach leads to a 50% higher short-circuit current than with an InP top segment. Such a long top segment could facilitate the fabrication and contacting of nanowire array solar cells. Such design schemes for managing minority carriers could open the door to higher performance in single- and multi-junction nanowire-based solar cells.
|
|
