SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Pitts T) srt2:(2005-2009)"

Sökning: WFRF:(Pitts T) > (2005-2009)

  • Resultat 1-7 av 7
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Schael, S, et al. (författare)
  • Precision electroweak measurements on the Z resonance
  • 2006
  • Ingår i: Physics Reports. - : Elsevier BV. - 0370-1573 .- 1873-6270. ; 427:5-6, s. 257-454
  • Forskningsöversikt (refereegranskat)abstract
    • We report on the final electroweak measurements performed with data taken at the Z resonance by the experiments operating at the electron-positron colliders SLC and LEP. The data consist of 17 million Z decays accumulated by the ALEPH, DELPHI, L3 and OPAL experiments at LEP, and 600 thousand Z decays by the SLID experiment using a polarised beam at SLC. The measurements include cross-sections, forward-backward asymmetries and polarised asymmetries. The mass and width of the Z boson, m(Z) and Gamma(Z), and its couplings to fermions, for example the p parameter and the effective electroweak mixing angle for leptons, are precisely measured: m(Z) = 91.1875 +/- 0.0021 GeV, Gamma(Z) = 2.4952 +/- 0.0023 GeV, rho(l) = 1.0050 +/- 0.0010, sin(2)theta(eff)(lept) = 0.23153 +/- 0.00016. The number of light neutrino species is determined to be 2.9840 +/- 0.0082, in agreement with the three observed generations of fundamental fermions. The results are compared to the predictions of the Standard Model (SM). At the Z-pole, electroweak radiative corrections beyond the running of the QED and QCD coupling constants are observed with a significance of five standard deviations, and in agreement with the Standard Model. Of the many Z-pole measurements, the forward-backward asymmetry in b-quark production shows the largest difference with respect to its SM expectation, at the level of 2.8 standard deviations. Through radiative corrections evaluated in the framework of the Standard Model, the Z-pole data are also used to predict the mass of the top quark, m(t) = 173(+10)(+13) GeV, and the mass of the W boson, m(W) = 80.363 +/- 0.032 GeV. These indirect constraints are compared to the direct measurements, providing a stringent test of the SM. Using in addition the direct measurements of m(t) and m(W), the mass of the as yet unobserved SM Higgs boson is predicted with a relative uncertainty of about 50% and found to be less than 285 GeV at 95% confidence level. (c) 2006 Elsevier B.V. All rights reserved.
  •  
2.
  • Lönnroth, J. -S, et al. (författare)
  • Integrated ELM modelling
  • 2006
  • Ingår i: Contributions to Plasma Physics. - : Wiley. - 0863-1042 .- 1521-3986. ; 46:7-9, s. 726-738
  • Tidskriftsartikel (refereegranskat)abstract
    • This paper presents a short overview of current trends and progress in integrated ELM modelling. First, the concept of integrated ELM modelling is introduced, various interpretations of it are given and the need for it is discussed. Then follows an overview of different techniques and methods used in integrated ELM modelling presented roughly according to physics approached in use and in order of increasing complexity. The paper concludes with a short discussion of open issues and future modelling requirements within the field of integrated ELM modelling.
  •  
3.
  • Andrew, P, et al. (författare)
  • Outer divertor target deposited layers during reversed magnetic field operation in JET
  • 2005
  • Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 337:1-3, s. 99-103
  • Tidskriftsartikel (refereegranskat)abstract
    • Divertor surface temperatures are significantly affected by the presence of deposited surface layers. This phenomenon can be used to monitor deposited layer evolution on a shot-by-shot basis. It was found that during an experimental campaign where the B x del B direction was reversed that the outer target, normally an erosion zone, became a deposition zone.
  •  
4.
  • Litaudon, X., et al. (författare)
  • Development of steady-state scenarios compatible with ITER-like wall conditions
  • 2007
  • Ingår i: Plasma Physics and Controlled Fusion. - 0741-3335 .- 1361-6587. ; 49:12B, s. B529-B550
  • Tidskriftsartikel (refereegranskat)abstract
    • A key issue for steady-state tokamak operation is to determine the edge conditions that are compatible both with good core confinement and with the power handling and plasma exhaust capabilities of the plasma facing components (PFCs) and divertor systems. A quantitative response to this open question will provide a robust scientific basis for reliable extrapolation of present regimes to an ITER compatible steady-state scenario. In this context, the JET programme addressing steady-state operation is focused on the development of non-inductive, high confinement plasmas with the constraints imposed by the PFCs. A new beryllium main chamber wall and tungsten divertor together with an upgrade of the heating/fuelling capability are currently in preparation at JET. Operation at higher power with this ITER-like wall will impose new constraints on non-inductive scenarios. Recent experiments have focused on the preparation for this new phase of JET operation. In this paper, progress in the development of advanced tokamak (AT) scenarios at JET is reviewed keeping this long-term objective in mind. The approach has consisted of addressing various critical issues separately during the 2006-2007 campaigns with a view to full scenario integration when the JET upgrades are complete. Regimes with internal transport barriers (ITBs) have been developed at q(95) similar to 5 and high triangularity, 3 (relevant to the ITER steady-state demonstration) by applying more than 30 MW of additional heating power reaching beta(N) similar to 2 at B(o) similar to 3.1 T. Operating at higher 6 has allowed the edge pedestal and core densities to be increased pushing the ion temperature closer to that of the electrons. Although not yet fully integrated into a performance enhancing ITB scenario, Neon seeding has been successfully explored to increase the radiated power fraction (up to 60%), providing significant reduction of target tile power fluxes (and hence temperatures) and mitigation of edge localized mode (ELM) activity. At reduced toroidal magnetic field strength, high beta(N) regimes have been achieved and q-profile optimization investigated for use in steady-state scenarios. Values of beta(N) above the 'no-wall magnetohydrodynamic limit' (beta(N) similar to 3.0) have been sustained for a resistive current diffusion time in high-delta configurations (at 1.2 MA/1.8 T). In this scenario, ELM activity has been mitigated by applying magnetic perturbations using error field correction coils to provide ergodization of the magnetic field at the plasma edge. In a highly shaped, quasi-double null X-point configuration, ITBs have been generated on the ion heat transport channel and combined with 'grassy' ELMs with similar to 30 MW of applied heating power (at 1.2 MA/2.7 T, q(95) similar to 7). Advanced algorithms and system identification procedures have been developed with a view to developing simultaneously temperature and q-profile control in real-time. These techniques have so far been applied to the control of the q-profile evolution in JET AT scenarios.
  •  
5.
  • Litaudon, X., et al. (författare)
  • Prospects for steady-state scenarios on JET
  • 2007
  • Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 47:9, s. 1285-1292
  • Tidskriftsartikel (refereegranskat)abstract
    • In the 2006 experimental campaign, progress has been made on JET to operate non-inductive scenarios at higher applied powers (31 MW) and density (n(1) similar to 4 x 10(19) m(-3)), with ITER-relevant safety factor (q(95) similar to 5) and plasma shaping, taking advantage of the new divertor capabilities. The extrapolation of the performance using transport modelling benchmarked on the experimental database indicates that the foreseen power upgrade (similar to 45 MW) will allow the development of non-inductive scenarios where the bootstrap current is maximized together with the fusion yield and not, as in present-day experiments, at its expense. The tools for the long-term JET programme are the new ITER-like ICRH antenna (similar to 15 MW), an upgrade of the NB power (35 MW/20s or 17.5 MW/40s), a new ITER-like first wall, a new pellet injector for edge localized mode control together with improved diagnostic and control capability. Operation with the new wall will set new constraints on non-inductive scenarios that are already addressed experimentally and in the modelling. The fusion performance and driven current that could be reached at high density and power have been estimated using either 0D or 1-1/2D validated transport models. In the high power case (45 MW), the calculations indicate the potential for the operational space of the non-inductive regime to be extended in terms of current (similar to 2.5 MA) and density (n(1) > 5 x 10(19) m(-3)), with high beta(N) (beta(N) > 3.0) and a fraction of the bootstrap current within 60-70% at high toroidal field (similar to 3.5 T).
  •  
6.
  • Solano, E. R., et al. (författare)
  • ELMS and strike point jumps
  • 2005
  • Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 337-39:03-jan, s. 747-750
  • Tidskriftsartikel (refereegranskat)abstract
    • If an ELM is a peeling of flux surfaces from the plasma, due to a broken separatrix, current density is lost as well as particles and energy. The fast loss of a current-carrying plasma layer modifies the plasma equilibrium, leading to sudden shifts in the strike points at each ELM, towards the plasma centre. An experimental study of this conjectured model of the ELM has been made at JET, showing that in all cases of Type I ELMs studied, strike point shifts were observed. In two cases studied in detail, the estimated equilibrium changes provoked by flux surface peeling agree qualitatively with the observed strike point shifts.
  •  
7.
  • Solano, E. R., et al. (författare)
  • ELMs and strike point movements
  • 2008
  • Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 48:6
  • Tidskriftsartikel (refereegranskat)abstract
    • A detailed study of position changes of plasma strike points before and after edge localized modes (ELMs) in JET was carried out. A hypothesis being tested is that in an ELM previously closed edge field lines would open up, releasing plasma current and leading to the formation of a new, smaller separatrix. It was observed that after each ELM strike points have shifted a few centimetres towards the plasma centre ( up in JET). In some cases a transient (< 100 mu s), upwards large (> 10 cm) jump of strike positions was observed first. It was followed by an equally fast jump down to the shifted strike positions. Such behaviour has not been described in previous computational models of the ELM. Therefore two novel instability mechanisms are presented, which contribute to explain the changes in strike point position: an X-point instability, due to positive toroidal current density at the X-point, and a diamagnetic instability, due to negative inboard toroidal current density.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-7 av 7

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy