| 1. |
- Frangoudis, Constantinos, et al.
(författare)
-
Experimental analysis of the CNx nano-damping material’s effect on the dynamic performance of a milling process
- 2013
-
Ingår i: Proceedings of the International Conference on Advanced Manufacturing Engineering and Technologies. - Stockholm : KTH Royal Institute of Technology. - 9789175018928 ; , s. 293-302
-
Konferensbidrag (refereegranskat)abstract
- Vibration phenomena are a main consideration during the material removal operation, as it has prominent effects on the product quality, cutting tool life, and productivity of that machining operation. Within the context of machining performance, role of enhanced stiffness and damping on the dynamic behaviour of machining systems such as turning and milling is well established. In this experimental analysis, investigations have been conducted for identifying the natural characteristics and dynamic responses of a milling process with the application of a novel carbon based (CNx) nano-composite damping material. TheCNx material has been applied into the joint interface of a workholding device with adaptive dynamic stiffness. Prior investigations of this material, produced by theplasma enhanced chemical vapor (PECVD) process, showed inherent damping capacity via interfacial frictional losses of its micro-columnar structures. For thisstudy, natural characteristics of the workholding system have been characterized bythe modal impact testing method. Dynamic responses during the machining processhave been measured through the vibration acceleration signals. The ultimate objective of this study is to comprehend the potentiality of CNx coating material forimproving machining process performance by analyzing the frequency response functions and measured vibration signals of the investigated milling process with varying stiffness and damping levels.
|
|
| 2. |
- A Asif, Farazee M, 1980-, et al.
(författare)
-
Performance analysis of the closed loop supply chain
- 2012
-
Ingår i: Journal of Remanufacturing. - Germany : Springer Science and Business Media LLC. - 2210-4690. ; 2:4
-
Tidskriftsartikel (refereegranskat)abstract
- PurposeThe question of resource scarcity and emerging pressure of environmental legislations has brought a new challenge for the manufacturing industry. On the one hand, there is a huge population that demands a large quantity of commodities; on the other hand, these demands have to be met by minimum resources and pollution. Resource conservative manufacturing (ResCoM) is a proposed holistic concept to manage these challenges. The successful implementation of this concept requires cross functional collaboration among relevant fields, and among them, closed loop supply chain is an essential domain. The paper aims to highlight some misconceptions concerning the closed loop supply chain, to discuss different challenges, and in addition, to show how the proposed concept deals with those challenges through analysis of key performance indicators (KPI).MethodsThe work presented in this paper is mainly based on the literature review. The analysis of performance of the closed loop supply chain is done using system dynamics, and the Stella software has been used to do the simulation. Findings The results of the simulation depict that in ResCoM; the performance of the closed loop supply chain is much enhanced in terms of supply, demand, and other uncertainties involved. The results may particularly be interesting for industries involved in remanufacturing, researchers in the field of closed loop supply chain, and other relevant areas. Originality The paper presented a novel research concept called ResCoM which is supported by system dynamics models of the closed loop supply chain to demonstrate the behavior of KPI in the closed loop supply chain.
|
|
| 3. |
- Abdul-Sattar, Nizami, 1982, et al.
(författare)
-
Comparative analysis using EIA for developed and developing coutnries case studies of hydroelectric power plants in Pakistan, Norway and Sweden
- 2011
-
Ingår i: International Journal of Sustainable Development & World Ecology. - : Informa UK Limited. - 1745-2627 .- 1350-4509. ; 18:2, s. 134-142
-
Tidskriftsartikel (refereegranskat)abstract
- Environmental impact assessment (EIA) is an important legislative and scientific tool that may assist and improve the quality assistance for the decision-making process in sustainable development. Here, a comparison of EIAs from three cases of hydropower projects in Pakistan, Norway and Sweden is reported. A huge difference concerning the incorporation of environmental considerations into the decisionmaking process between developed and developing countries is observed. The EIA system of Pakistan appears to be less efficient in the application and review process. In addition, the appraisal of issues, the decision-making process and evaluation through post-monitoring is not as well performed in Pakistan as in cases of hydroelectric power plants in Sweden and Norway. The key reason for this shortcoming is misconceptions about the EIA process, which initially receives intense attention but becomes weakened by the time of implementation. This implies that there is a need to adopt simplified and flexible EIA techniques suitable for the infrastructure and resources of a specific country, taking into account institutional, technical and financial constraints. Improvements are required in public participation, awareness, as well as in environmental control and data system sectors in Pakistan, besides simply enacting legislation to achieve the goals of the EIA system.
|
|
| 4. |
- Ablikim, M., et al.
(författare)
-
Amplitude analysis of the D+ -> K-S(0)pi + (0)(pi) Dalitz plot
- 2014
-
Ingår i: Physical Review D. - 1550-7998 .- 1550-2368. ; 89:5, s. 052001-
-
Tidskriftsartikel (refereegranskat)abstract
- We perform an analysis of the D+ -> K-S(0)pi + (0)(pi) Dalitz plot using a data set of 2.92 fb(-1) of e(+) e(-) collisions at the (3770) mass accumulated by the BESIII experiment, in which 166694 candidate events are selected with a background of 15.1%. The Dalitz plot is found to be well represented by a combination of six quasitwo- body decay channels [k(SP)(0)(+) (1450)(+,) ] plus a small nonresonant component. Using the fit fractions from this analysis, partial branching ratios are updated with higher precision than previous measurements.
|
|
| 5. |
- Ablikim, M., et al.
(författare)
-
Measurement of chi(cJ) decaying into eta ' K+K-
- 2014
-
Ingår i: Physical Review D. - 1550-7998 .- 1550-2368. ; 89:7, s. 074030-
-
Tidskriftsartikel (refereegranskat)abstract
- Using (106.41 +/- 0.86) x 10(6) Psi(3686) events collected with the BESIII detector at BEPCII, we study for the first time the decay chi(cJ) -> eta'K+K- (J = 1, 2), where eta' -> gamma rho(0) and eta' -> eta pi(+)pi(-). A partial wave analysis in the covariant tensor amplitude formalism is performed for the decay chi(c1) -> eta'K+K-. Intermediate processes chi(c1) -> eta'f(2)'(1525) chi(c1) -> K-0*(1430)K-+/-(-/+) (K-0*(1430)(+/-) -> eta'K-+/-) are observed with statistical significances larger than 5 sigma, and their branching fractions are measured.
|
|
| 6. |
- Ablikim, M., et al.
(författare)
-
Measurement of the branching fraction for psi(3686) -> omega K+K-
- 2014
-
Ingår i: Physical Review D. - 1550-7998 .- 1550-2368. ; 89:11, s. 112006-
-
Tidskriftsartikel (refereegranskat)abstract
- With 1.06 x 10(8) psi(3686) events collected with the BESIII detector, the branching fraction of psi(3686) -> omega K+K- is measured to be (1.54 +/- 0.04 +/- 0.11) x 10(-4). This is the most precise result to date, due to the largest psi(3686) sample, improved signal reconstruction efficiency, good simulation of the detector performance, and a more accurate knowledge of the continuum contribution. Using the branching fraction of J/psi -> omega K+K-, the ratio B(psi(3868) -> K+K-)/B(J/psi -> K+K-) is determined to be (18.4 +/- 3.7)%. This constitutes a significantly improved test of the 12% rule, with the uncertainty now dominated by the J/psi branching fraction.
|
|
| 7. |
- Ablikim, M., et al.
(författare)
-
Measurement of the $D\to K^-\pi^+$ strong phase difference in $\psi(3770)\to D^0\overline{D}{}^0$
- 2014
-
Ingår i: PHYSICS LETTERS B. - : Elsevier BV. - 0370-2693. ; 734
-
Tidskriftsartikel (refereegranskat)abstract
- We study $D^0\overline{D}{}^0$ pairs produced in $e^+e^-$ collisions at $\sqrt{s}=3.773$ GeV using a data sample of 2.92 fb$^{-1}$ collected with the BESIII detector. We measure the asymmetry $\mathcal{A}^{CP}_{K\pi}$ of the branching fractions of $D \to K^-\pi^+$ in $CP$-odd and $CP$-even eigenstates to be $(12.7\pm1.3\pm0.7)\times10^{-2}$. $\mathcal{A}^{CP}_{K\pi}$ can be used to extract the strong phase difference $\delta_{K\pi}$ between the doubly Cabibbo-suppressed process $\overline{D}{}^{0}\to K^-\pi^+$ and the Cabibbo-favored process $D^0\to K^- \pi^+$. Using world-average values of external parameters, we obtain $\cos\delta_{K\pi} = 1.02\pm0.11\pm0.06\pm0.01$. Here, the first and second uncertainties are statistical and systematic, respectively, while the third uncertainty arises from the external parameters. This is the most precise measurement of $\delta_{K\pi}$ to date.
|
|
| 8. |
- Ablikim, M., et al.
(författare)
-
Observation of e(+)e(-) -> gamma X(3872) at BESIII
- 2014
-
Ingår i: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 112:9, s. 092001-
-
Tidskriftsartikel (refereegranskat)abstract
- With data samples collected with the BESIII detector operating at the BEPCII storage ring at center-of-mass energies from 4.009 to 4.420 GeV, the process e(+)e(-) -> gamma X(3872) is observed for the first time with a statistical significance of 6.3 sigma. The measured mass of the X(3872) is (3871.9 +/- 0.7(stat) +/- 0.2(syst)) MeV/c(2), in agreement with previous measurements. Measurements of the product of the cross section sigma[e(+)e(-) -> gamma X(3872)] and the branching fraction B [X(3872) -> pi(+)pi(-)J/psi] at center-of-mass energies 4.009, 4.229, 4.260, and 4.360 GeV are reported. Our measurements are consistent with expectations for the radiative transition process Y(4260) -> gamma X(3872).
|
|
| 9. |
- Ablikim, M., et al.
(författare)
-
Observation of e(+)e(-) -> pi(0)pi(0)h(c) and a Neutral Charmoniumlike Structure Z(c)(4020)(0)
- 2014
-
Ingår i: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 113:21, s. 212002-
-
Tidskriftsartikel (refereegranskat)abstract
- Using data collected with the BESIII detector operating at the Beijing Electron Positron Collider at center-of-mass energies of root s = 4.23, 4.26, and 4.36 GeV, we observe e(+)e(-) -> pi(0)pi(0)h(c) for the first time. The Born cross sections are measured and found to be about half of those of e(+)e(-) -> pi(+)pi(-)h(c) within less than 2 sigma. In the pi(0)h(c) mass spectrum, a structure at 4.02 GeV/c(2) is found. It is most likely to be the neutral isospin partner of the Z(c)(4020)(+/-) observed in the process of e(+)e(-) -> pi(+)pi(-)h(c) being found. A fit to the pi(0)h(c) invariant mass spectrum, with the width of the Z(c)(4020)(0) fixed to that of its charged isospin partner and possible interferences with non-Z(c)(4020)(0) amplitudes neglected, gives a mass of (4023.9 +/- 2.2 +/- 3.8) MeV/c(2) for the Z(c)(4020)(0), where the first error is statistical and the second systematic.
|
|
| 10. |
- Ablikim, M., et al.
(författare)
-
Observation of $e^+e^− → γX$(3872) at BESIII
- 2014
-
Ingår i: PHYSICAL REVIEW LETTERS. - 1079-7114. ; 112:9
-
Tidskriftsartikel (refereegranskat)abstract
- With data samples collected with the BESIII detector operating at the BEPCII storage ring at center-of-mass energies from 4.009 to 4.420 GeV, the process $e^{+} e^{-} \to \gamma X(3872)$ is observed for the first time with a statistical significance of $6.3\sigma$. The measured mass of the $X(3872)$ is ($3871.9\pm 0.7_{\rm stat.}\pm 0.2_{\rm sys.}$) MeV/$c^2$, in agreement with previous measurements. Measurements of the product of the cross section $\sigma[e^{+} e^{-} \to \gamma X(3872)]$ and the branching fraction $\mathcal{B}[X(3872) \to \pi^{+} \pi^{-} J/\psi]$ at center-of-mass energies 4.009, 4.229, 4.260, and 4.360 GeV are reported. Our measurements are consistent with expectations for the radiative transition process $Y(4260) \to \gamma X(3872)$.
|
|
