| 1. |
- Stroth, U., et al.
(författare)
-
Progress from ASDEX Upgrade experiments in preparing the physics basis of ITER operation and DEMO scenario development
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- An overview of recent results obtained at the tokamak ASDEX Upgrade (AUG) is given. A work flow for predictive profile modelling of AUG discharges was established which is able to reproduce experimental H-mode plasma profiles based on engineering parameters only. In the plasma center, theoretical predictions on plasma current redistribution by a dynamo effect were confirmed experimentally. For core transport, the stabilizing effect of fast ion distributions on turbulent transport is shown to be important to explain the core isotope effect and improves the description of hollow low-Z impurity profiles. The L-H power threshold of hydrogen plasmas is not affected by small helium admixtures and it increases continuously from the deuterium to the hydrogen level when the hydrogen concentration is raised from 0 to 100%. One focus of recent campaigns was the search for a fusion relevant integrated plasma scenario without large edge localised modes (ELMs). Results from six different ELM-free confinement regimes are compared with respect to reactor relevance: ELM suppression by magnetic perturbation coils could be attributed to toroidally asymmetric turbulent fluctuations in the vicinity of the separatrix. Stable improved confinement mode plasma phases with a detached inner divertor were obtained using a feedback control of the plasma β. The enhanced D α H-mode regime was extended to higher heating power by feedback controlled radiative cooling with argon. The quasi-coherent exhaust regime was developed into an integrated scenario at high heating power and energy confinement, with a detached divertor and without large ELMs. Small ELMs close to the separatrix lead to peeling-ballooning stability and quasi continuous power exhaust. Helium beam density fluctuation measurements confirm that transport close to the separatrix is important to achieve the different ELM-free regimes. Based on separatrix plasma parameters and interchange-drift-Alfvén turbulence, an analytic model was derived that reproduces the experimentally found important operational boundaries of the density limit and between L- and H-mode confinement. Feedback control for the X-point radiator (XPR) position was established as an important element for divertor detachment control. Stable and detached ELM-free phases with H-mode confinement quality were obtained when the XPR was moved 10 cm above the X-point. Investigations of the plasma in the future flexible snow-flake divertor of AUG by means of first SOLPS-ITER simulations with drifts activated predict beneficial detachment properties and the activation of an additional strike point by the drifts.
|
|
| 2. |
|
|
| 3. |
- Gau, Rémi, et al.
(författare)
-
Brainhack : Developing a culture of open, inclusive, community-driven neuroscience
- 2021
-
Ingår i: Neuron. - : Elsevier. - 0896-6273 .- 1097-4199. ; 109:11, s. 1769-1775
-
Tidskriftsartikel (refereegranskat)abstract
- Brainhack is an innovative meeting format that promotes scientific collaboration and education in an open, inclusive environment. This NeuroView describes the myriad benefits for participants and the research community and how Brainhacks complement conventional formats to augment scientific progress.
|
|
| 4. |
- Bahr, A., et al.
(författare)
-
Non-reactive HiPIMS deposition of NbCx thin films : Effect of the target power density on structure-mechanical properties
- 2022
-
Ingår i: Surface & Coatings Technology. - : Elsevier. - 0257-8972 .- 1879-3347. ; 444
-
Tidskriftsartikel (refereegranskat)abstract
- The exceptional mechanical properties of transition metal carbide coatings are known to be governed by the carbon content and its morphological distribution. Here, we verify the influence of the target peak power density on the chemical composition, microstructure, and mechanical properties of NbCx coatings grown by non-reactive high-power impulse magnetron sputtering (HiPIMS). By tuning the pulse parameters, the power density can be increased from 0.11 to 1.48 kW/cm2 leading to a decrease in the C/Nb ratio from 1.52 to 0.99 within the films - proven by combined elastic backscattering and time-of-flight elastic recoil detection analysis. This decrease in the C/Nb ratio is accompanied by microstructural changes from nanocomposite morphologies with an average grain size of 6.6 +/- 2.5 nm at 0.13 kW/cm2 into more columnar structures with an average column width of 65.2 +/- 18.7 nm at 1.48 kW/cm2. Independent from the C/Nb ratio, all films exhibit a single face-centered cubic structure. The mechanical properties correlate with the enhanced growth behavior dominated by ions at higher peak power densities and the varied C/Nb ratios. A maximum in hardness and fracture toughness of H = 38.7 +/- 3.6 GPa and KIc = 2.78 +/- 0.13 MPa center dot m1/2 (at 3.2 GPa residual compressive stress), is obtained for the nearly stoichiometric NbC coating exhibiting C/Nb ratio of 1.06.
|
|
| 5. |
- Glechner, T., et al.
(författare)
-
Correlation between fracture characteristics and valence electron concentration of sputtered Hf-C-N based thin films
- 2020
-
Ingår i: Surface & Coatings Technology. - : Elsevier BV. - 0257-8972 .- 1879-3347. ; 399
-
Tidskriftsartikel (refereegranskat)abstract
- Hard protective coating materials based on transition metal nitrides and carbides typically suffer from limited fracture tolerance. To further tune these properties non-metal alloying - substituting C with N - has been proven favorable for magnetron sputtered Hf-C-N based thin films. A theoretically predicted increase in valence electron concentration (from 8.0 to 9.0 e/f.u. from Hf-C to Hf-N) through nitrogen alloying lead to an increase in fracture toughness (K-IC obtained during in-situ SEM cantilever bending) from 1.89 +/- 0.15 to 2.33 +/- 0.18 MPa.m(1/2) for Hf0.43C0.57 to Hf0.35C0.30N0.35, respectively. The hardness remains close to the super-hard regime with values of 37.8 +/- 2.1 to 39.9 +/- 2.7 GPa for these specific compositions. Already the addition of small amounts of nitrogen, while sputtering a ceramic Hf-C target, leads to a drastic increase of nitrogen on the non-metallic sublattice for fcc single phased structured HfC1-xNx films, where x = N/(C + N). The here obtained results also provide experimental proof for the correlation between fracture characteristics and valence electron concentration.
|
|
| 6. |
- Hahn, R., et al.
(författare)
-
Unraveling the superlattice effect for hexagonal transition metal diboride coatings
- 2023
-
Ingår i: Scripta Materialia. - : Elsevier. - 1359-6462 .- 1872-8456. ; 235
-
Tidskriftsartikel (refereegranskat)abstract
- Superlattice structures enable the simultaneous enhancement in hardness (H) and fracture toughness (KIC) of ceramic-like coatings. While a deeper understanding of this effect has been gained for fcc-structured transition metal nitrides (TMN), hardly any knowledge is available for hexagonal diborides (TMB2). Here we show that superlattices can-similarly to nitrides-increase the hardness and toughness of diboride films. For this purpose, we deposited TiB2/WB2 and TiB2/ZrB2 superlattices with different bilayer periods (?) by non-reactive sputtering. Nanoindentation and in-situ microcantilever bending tests yield a distinct H peak for the TiB2/WB2 system (45.5 & PLUSMN; 1.3 GPa for ? = 6 nm) but no increase in KIC related to a difference in shear moduli (112 GPa). Contrary, the TiB2/ZrB2 system shows no peak in H, but for KIC with 3.70 & PLUSMN; 0.26 MPa & BULL;m1/2 at ? = 4 nm originating from differences in lattice spacing (0.14 & ANGS;), hence causing coherent stresses retarding crack growth.
|
|
| 7. |
- Jacobs, Alan M., et al.
(författare)
-
The Qualitative Transparency Deliberations : Insights and Implications
- 2021
-
Ingår i: Perspectives on Politics. - 1537-5927 .- 1541-0986. ; 19:1, s. 171-208
-
Tidskriftsartikel (refereegranskat)abstract
- In recent years, a variety of efforts have been made in political science to enable, encourage, or require scholars to be more open and explicit about the bases of their empirical claims and, in turn, make those claims more readily evaluable by others. While qualitative scholars have long taken an interest in making their research open, reflexive, and systematic, the recent push for overarching transparency norms and requirements has provoked serious concern within qualitative research communities and raised fundamental questions about the meaning, value, costs, and intellectual relevance of transparency for qualitative inquiry. In this Perspectives Reflection, we crystallize the central findings of a three-year deliberative process-the Qualitative Transparency Deliberations (QTD)-involving hundreds of political scientists in a broad discussion of these issues. Following an overview of the process and the key insights that emerged, we present summaries of the QTD Working Groups' final reports. Drawing on a series of public, online conversations that unfolded at www.qualtd.net, the reports unpack transparency's promise, practicalities, risks, and limitations in relation to different qualitative methodologies, forms of evidence, and research contexts. Taken as a whole, these reports-the full versions of which can be found in the Supplementary Materials-offer practical guidance to scholars designing and implementing qualitative research, and to editors, reviewers, and funders seeking to develop criteria of evaluation that are appropriate-as understood by relevant research communities-to the forms of inquiry being assessed. We dedicate this Reflection to the memory of our coauthor and QTD working group leader Kendra Koivu.(1)
|
|
| 8. |
|
|
