| 1. |
- Abel, I, et al.
(författare)
-
Overview of the JET results with the ITER-like wall
- 2013
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 53:10, s. 104002-
-
Tidskriftsartikel (refereegranskat)abstract
- Following the completion in May 2011 of the shutdown for the installation of the beryllium wall and the tungsten divertor, the first set of JET campaigns have addressed the investigation of the retention properties and the development of operational scenarios with the new plasma-facing materials. The large reduction in the carbon content (more than a factor ten) led to a much lower Z(eff) (1.2-1.4) during L- and H-mode plasmas, and radiation during the burn-through phase of the plasma initiation with the consequence that breakdown failures are almost absent. Gas balance experiments have shown that the fuel retention rate with the new wall is substantially reduced with respect to the C wall. The re-establishment of the baseline H-mode and hybrid scenarios compatible with the new wall has required an optimization of the control of metallic impurity sources and heat loads. Stable type-I ELMy H-mode regimes with H-98,H-y2 close to 1 and beta(N) similar to 1.6 have been achieved using gas injection. ELM frequency is a key factor for the control of the metallic impurity accumulation. Pedestal temperatures tend to be lower with the new wall, leading to reduced confinement, but nitrogen seeding restores high pedestal temperatures and confinement. Compared with the carbon wall, major disruptions with the new wall show a lower radiated power and a slower current quench. The higher heat loads on Be wall plasma-facing components due to lower radiation made the routine use of massive gas injection for disruption mitigation essential.
|
|
| 2. |
- Romanelli, F, et al.
(författare)
-
Overview of the JET results
- 2011
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 51:9
-
Tidskriftsartikel (refereegranskat)abstract
- Since the last IAEA Conference JET has been in operation for one year with a programmatic focus on the qualification of ITER operating scenarios, the consolidation of ITER design choices and preparation for plasma operation with the ITER-like wall presently being installed in JET. Good progress has been achieved, including stationary ELMy H-mode operation at 4.5 MA. The high confinement hybrid scenario has been extended to high triangularity, lower ρ*and to pulse lengths comparable to the resistive time. The steady-state scenario has also been extended to lower ρ*and ν*and optimized to simultaneously achieve, under stationary conditions, ITER-like values of all other relevant normalized parameters. A dedicated helium campaign has allowed key aspects of plasma control and H-mode operation for the ITER non-activated phase to be evaluated. Effective sawtooth control by fast ions has been demonstrated with3He minority ICRH, a scenario with negligible minority current drive. Edge localized mode (ELM) control studies using external n = 1 and n = 2 perturbation fields have found a resonance effect in ELM frequency for specific q95values. Complete ELM suppression has, however, not been observed, even with an edge Chirikov parameter larger than 1. Pellet ELM pacing has been demonstrated and the minimum pellet size needed to trigger an ELM has been estimated. For both natural and mitigated ELMs a broadening of the divertor ELM-wetted area with increasing ELM size has been found. In disruption studies with massive gas injection up to 50% of the thermal energy could be radiated before, and 20% during, the thermal quench. Halo currents could be reduced by 60% and, using argon/deuterium and neon/deuterium gas mixtures, runaway electron generation could be avoided. Most objectives of the ITER-like ICRH antenna have been demonstrated; matching with closely packed straps, ELM resilience, scattering matrix arc detection and operation at high power density (6.2 MW m-2) and antenna strap voltages (42 kV). Coupling measurements are in very good agreement with TOPICA modelling. © 2011 IAEA, Vienna.
|
|
| 3. |
|
|
| 4. |
- Ferrari, Raffaele, et al.
(författare)
-
Frontotemporal dementia and its subtypes: a genome-wide association study.
- 2014
-
Ingår i: Lancet Neurology. - 1474-4465. ; 13:7, s. 686-699
-
Tidskriftsartikel (refereegranskat)abstract
- Frontotemporal dementia (FTD) is a complex disorder characterised by a broad range of clinical manifestations, differential pathological signatures, and genetic variability. Mutations in three genes-MAPT, GRN, and C9orf72-have been associated with FTD. We sought to identify novel genetic risk loci associated with the disorder.
|
|
| 5. |
- Buchhave, Lars A., et al.
(författare)
-
An abundance of small exoplanets around stars with a wide range of metallicities
- 2012
-
Ingår i: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 486:7403, s. 375-377
-
Tidskriftsartikel (refereegranskat)abstract
- The abundance of heavy elements (metallicity) in the photospheres of stars similar to the Sun provides a 'fossil' record of the chemical composition of the initial protoplanetary disk. Metal-rich stars are much more likely to harbour gas giant planets(1-4), supporting the model that planets form by accumulation of dust and ice particles(5). Recent ground-based surveys suggest that this correlation is weakened for Neptunian-sized planets(4,6-9). However, how the relationship between size and metallicity extends into the regime of terrestrial-sized exoplanets is unknown. Here we report spectroscopic metallicities of the host stars of 226 small exoplanet candidates discovered by NASA's Kepler mission(10), including objects that are comparable in size to the terrestrial planets in the Solar System. We find that planets with radii less than four Earth radii form around host stars with a wide range of metallicities (but on average a metallicity close to that of the Sun), whereas large planets preferentially form around stars with higher metallicities. This observation suggests that terrestrial planets may be widespread in the disk of the Galaxy, with no special requirement of enhanced metallicity for their formation.
|
|
| 6. |
- De Vries, W., et al.
(författare)
-
Use of dynamic soil-vegetation models to assess impacts of nitrogen deposition on plant species composition: an overview
- 2010
-
Ingår i: Ecological Applications. - : Wiley. - 1051-0761. ; 20:1, s. 60-79
-
Tidskriftsartikel (refereegranskat)abstract
- Field observations and experimental data of effects of nitrogen (N) deposition oil plant species diversity have been Used to derive empirical critical N loads for various ecosystems. The great advantage of such an approach is the inclusion of field evidence, but there are also restrictions, such as the absence of explicit criteria regarding significant effects on the vegetation, and the impossibility to predict future impacts when N deposition changes. Model approaches Call account for this. In this paper, we review the possibilities of static and dynamic multispecies models in combination with dynamic soil-vegetation models to (1) predict plant species composition as a function of atmospheric N deposition and (2) calculate critical N loads in relation to a prescribed protection level of the species composition. The similarities between the models are presented, but also several important differences, including the Use of different indicators for N and acidity and the prediction of individual plant species VS. Plant communities. A summary of the strengths and weaknesses of the various Models, including their validation status, is given. Furthermore,. examples are given of critical load calculations with the model chains and their comparison with empirical critical N loads. We show that linked biogeochemistry-biodiversity models for N have potential for applications to support European policy to reduce N input, but the definition of damage thresholds for terrestrial biodiversity represents a major challenge. There is also a clear need for further testing and validation of the models against long-term monitoring or long-term experimental data sets and against large-scale survey data. This requires a focused data collection ill Europe. combing vegetation descriptions with variables affecting the species diversity. such as Soil acidity, nutrient status and water availability. Finally there is a need for adaptation and upscaling of the models beyond the regions for which dose-response relationships have been parameterized, to make them generally applicable.
|
|
| 7. |
|
|
| 8. |
- Fairfield, Heather, et al.
(författare)
-
Mutation discovery in mice by whole exome sequencing
- 2011
-
Ingår i: Genome Biology. - : Springer Science and Business Media LLC. - 1465-6906 .- 1474-760X. ; 12:9, s. R86-
-
Tidskriftsartikel (refereegranskat)abstract
- We report the development and optimization of reagents for in-solution, hybridization-based capture of the mouse exome. By validating this approach in a multiple inbred strains and in novel mutant strains, we show that whole exome sequencing is a robust approach for discovery of putative mutations, irrespective of strain background. We found strong candidate mutations for the majority of mutant exomes sequenced, including new models of orofacial clefting, urogenital dysmorphology, kyphosis and autoimmune hepatitis.
|
|
| 9. |
- Rowe, K. G., et al.
(författare)
-
Lessons from the lollipop : Biotribology, tribocorrosion, and irregular surfaces
- 2014
-
Ingår i: Tribology letters. - : Springer New York LLC. - 1023-8883 .- 1573-2711. ; 56:2, s. 273-280
-
Tidskriftsartikel (refereegranskat)abstract
- Biotribology and tribocorrosion are often not included in numerical or computational modeling efforts to predict wear because of the apparent complexity in the geometry, the variability in removal rates, and the challenge associated with mixing time-dependent removal processes such as corrosion with cyclic material removal from wear. The lollipop is an accessible bio-tribocorrosion problem that is well known but underexplored scientifically as a tribocorrosion process. Stress-assisted dissolution was found to be the dominant tribocorrosion process driving material removal in this system. A model of material removal was described and approached by lumping the intrinsically time-dependent process with a mechanically driven process into a single cyclic volumetric material removal rate. This required the collection of self-reported wear data from 58 participants that were used in conjunction with statistical analysis of actual lollipop cross-sectional information. Thousands of repeated numerical simulations of material removal and shape evolution were conducted using a simple Monte Carlo process that varied the input parameters and geometries to match the measured variability. The resulting computations were analyzed to calculate both the average number of licks required to reach the Tootsie Roll® center of a Tootsie Roll® pop, as well as the expected variation thereof.
|
|
| 10. |
- Tudor-Locke, Catrine, et al.
(författare)
-
How many steps/day are enough? for children and adolescents.
- 2011
-
Ingår i: The international journal of behavioral nutrition and physical activity. - : Springer Science and Business Media LLC. - 1479-5868. ; 8
-
Tidskriftsartikel (refereegranskat)abstract
- Worldwide, public health physical activity guidelines include special emphasis on populations of children (typically 6-11 years) and adolescents (typically 12-19 years). Existing guidelines are commonly expressed in terms of frequency, time, and intensity of behaviour. However, the simple step output from both accelerometers and pedometers is gaining increased credibility in research and practice as a reasonable approximation of daily ambulatory physical activity volume. Therefore, the purpose of this article is to review existing child and adolescent objectively monitored step-defined physical activity literature to provide researchers, practitioners, and lay people who use accelerometers and pedometers with evidence-based translations of these public health guidelines in terms of steps/day. In terms of normative data (i.e., expected values), the updated international literature indicates that we can expect 1) among children, boys to average 12,000 to 16,000 steps/day and girls to average 10,000 to 13,000 steps/day; and, 2) adolescents to steadily decrease steps/day until approximately 8,000-9,000 steps/day are observed in 18-year olds. Controlled studies of cadence show that continuous MVPA walking produces 3,300-3,500 steps in 30 minutes or 6,600-7,000 steps in 60 minutes in 10-15 year olds. Limited evidence suggests that a total daily physical activity volume of 10,000-14,000 steps/day is associated with 60-100 minutes of MVPA in preschool children (approximately 4-6 years of age). Across studies, 60 minutes of MVPA in primary/elementary school children appears to be achieved, on average, within a total volume of 13,000 to 15,000 steps/day in boys and 11,000 to 12,000 steps/day in girls. For adolescents (both boys and girls), 10,000 to 11,700 may be associated with 60 minutes of MVPA. Translations of time- and intensity-based guidelines may be higher than existing normative data (e.g., in adolescents) and therefore will be more difficult to achieve (but not impossible nor contraindicated). Recommendations are preliminary and further research is needed to confirm and extend values for measured cadences, associated speeds, and MET values in young people; continue to accumulate normative data (expected values) for both steps/day and MVPA across ages and populations; and, conduct longitudinal and intervention studies in children and adolescents required to inform the shape of step-defined physical activity dose-response curves associated with various health parameters.
|
|
