| 1. |
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
- Stroth, U., et al.
(författare)
-
Progress from ASDEX Upgrade experiments in preparing the physics basis of ITER operation and DEMO scenario development
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- An overview of recent results obtained at the tokamak ASDEX Upgrade (AUG) is given. A work flow for predictive profile modelling of AUG discharges was established which is able to reproduce experimental H-mode plasma profiles based on engineering parameters only. In the plasma center, theoretical predictions on plasma current redistribution by a dynamo effect were confirmed experimentally. For core transport, the stabilizing effect of fast ion distributions on turbulent transport is shown to be important to explain the core isotope effect and improves the description of hollow low-Z impurity profiles. The L-H power threshold of hydrogen plasmas is not affected by small helium admixtures and it increases continuously from the deuterium to the hydrogen level when the hydrogen concentration is raised from 0 to 100%. One focus of recent campaigns was the search for a fusion relevant integrated plasma scenario without large edge localised modes (ELMs). Results from six different ELM-free confinement regimes are compared with respect to reactor relevance: ELM suppression by magnetic perturbation coils could be attributed to toroidally asymmetric turbulent fluctuations in the vicinity of the separatrix. Stable improved confinement mode plasma phases with a detached inner divertor were obtained using a feedback control of the plasma β. The enhanced D α H-mode regime was extended to higher heating power by feedback controlled radiative cooling with argon. The quasi-coherent exhaust regime was developed into an integrated scenario at high heating power and energy confinement, with a detached divertor and without large ELMs. Small ELMs close to the separatrix lead to peeling-ballooning stability and quasi continuous power exhaust. Helium beam density fluctuation measurements confirm that transport close to the separatrix is important to achieve the different ELM-free regimes. Based on separatrix plasma parameters and interchange-drift-Alfvén turbulence, an analytic model was derived that reproduces the experimentally found important operational boundaries of the density limit and between L- and H-mode confinement. Feedback control for the X-point radiator (XPR) position was established as an important element for divertor detachment control. Stable and detached ELM-free phases with H-mode confinement quality were obtained when the XPR was moved 10 cm above the X-point. Investigations of the plasma in the future flexible snow-flake divertor of AUG by means of first SOLPS-ITER simulations with drifts activated predict beneficial detachment properties and the activation of an additional strike point by the drifts.
|
|
| 6. |
- Weckmann, Armin, et al.
(författare)
-
3D deposition patterns of deuterium retention and impurities in the COMPASS divertor : a data-driven root cause analysis and prediction approach
- 2022
-
Ingår i: Fusion engineering and design. - : Elsevier BV. - 0920-3796 .- 1873-7196. ; 179
-
Tidskriftsartikel (refereegranskat)abstract
- Divertor tiles from the COMPASS tokamak have been examined with ion beam analysis for the determination of deuterium retention and co-deposits. A novel approach was used to draw 2D deuterium retention maps at different depths and correlated to the concentrations of other elements: boron, carbon, oxygen and metals. This approach, which employs all three spatial dimensions, revealed that the deuterium retention pattern is not toroidally symmetric at different depths while the overall deuterium pattern is toroidally symmetric. Analysis of visible-light camera records disclosed that parts of the divertor were not wetted by plasma. The radial profile of deuterium in both wetted and non-wetted ( "shadowed ") divertor regions was compared to strike point positions, angle of incidence, electron temperature T-e, parallel heat flux Q(par) and ion saturation current Isat in order to find the influence of these parameters on deuterium retention. There are certain series of consecutive shots for which correlations between deuterium retention and separate plasma parameters (T-e, I-sat, Q(par)) are high. Combining the three parameters in a linear model or a power law model enabled reconstruction of the radial deuterium retention pattern. After fitting the model to one third of the data points, the deuterium retention for shadowed tiles was reproduced at the other two thirds of the data points within 20% deviation. This study shows the need for detailed tile analysis in three dimensions, the great benefits of broad statistical analysis in solving challenges in fusion, and motivates the investigation of COMPASS tiles after dismantling.
|
|
| 7. |
- Goriaev, A., et al.
(författare)
-
The upgraded TOMAS device : A toroidal plasma facility for wall conditioning, plasma production, and plasma-surface interaction studies
- 2021
-
Ingår i: Review of Scientific Instruments. - : AMER INST PHYSICS. - 0034-6748 .- 1089-7623. ; 92:2
-
Tidskriftsartikel (refereegranskat)abstract
- The Toroidal Magnetized System device has been significantly upgraded to enable development of various wall conditioning techniques, including methods based on ion and electron cyclotron (IC/EC) range of frequency plasmas, and to complement plasma-wall interaction research in tokamaks and stellarators. The toroidal magnetic field generated by 16 coils can reach its maximum of 125 mT on the toroidal axis. The EC system is operated at 2.45 GHz with up to 6 kW forward power. The IC system can couple up to 6 kW in the frequency range of 10 MHz-50 MHz. The direct current glow discharge system is based on a graphite anode with a maximum voltage of 1.5 kV and a current of 6 A. A load-lock system with a vertical manipulator allows exposure of material samples. A number of diagnostics have been installed: single- and triple-pin Langmuir probes for radial plasma profiles, a time-of-flight neutral particle analyzer capable of detecting neutrals in the energy range of 10 eV-1000 eV, and a quadrupole mass spectrometer and video systems for plasma imaging. The majority of systems and diagnostics are controlled by the Siemens SIMATIC S7 system, which also provides safety interlocks.
|
|
| 8. |
- Lee, S., et al.
(författare)
-
Tritium distributions in castellated structures of Be limiter tiles from JET-ITER-like wall experiments
- 2023
-
Ingår i: Nuclear Fusion. - : IOP Publishing Ltd. - 0029-5515 .- 1741-4326. ; 63:4
-
Tidskriftsartikel (refereegranskat)abstract
- Tritium retention in the castellated structure of beryllium limiters used in JET with the ITER-like wall (ILW) during the first (ILW1), third (ILW3) and all three (ILW1-3) campaigns were examined and evaluated. Tritium was deposited on the surfaces inside the castellation grooves together with deuterium, beryllium, oxygen, carbon and small amounts of metallic impurities such as nickel, copper and tungsten. The tritium content after the ILW1 campaign was greater than after the ILW3 campaign. This is attributed to the steadily decreasing amount of carbon impurities in JET from campaign to campaign. The majority of tritium was retained in shallow regions in the grooves, up to 2 mm from the entrance to the gap. It was comparable on all sides of the castellation, i.e. no difference has been detected between the toroidal and poloidal gaps. Secondly, the tritium retention in the gaps was similar on all specimens independent of their position in the tokamak, while the retention on the plasma-facing surfaces clearly depended on the tile position. The tritium deposition patterns in the castellation were also compared with the deuterium distribution determined in earlier studies.
|
|
| 9. |
- Wojcik-Gargula, A., et al.
(författare)
-
Studies on the behaviour of titanium activation foils during long-term exposure at the JET tokamak
- 2022
-
Ingår i: Fusion engineering and design. - : Elsevier BV. - 0920-3796 .- 1873-7196. ; 177, s. 113056-
-
Tidskriftsartikel (refereegranskat)abstract
- Titanium activation foils for neutron studies were exposed inside the JET tokamak vessel during the entire 15 months long experimental campaign with deuterium fuelling. Afterwards, it was found that the structure of some foils was only slightly affected, while others were totally or partly disintegrated into dust: flakes and powder. The analyses indicated that defects produced in materials by cutting during the sample preparation eventually lead to the degradation of the titanium crystal structure upon the exposure in JET to neutral particles including hydrogen. In some cases, a passive oxide layer on the foil surface effectively prevented the access of hydrogen, and by this protected the metal against partial or complete transformation into the titanium hydride powder.
|
|
| 10. |
- Catarino, N., et al.
(författare)
-
Deposition in the tungsten divertor during the 2011-2016 campaigns in JET with ITER-like wall
- 2020
-
Ingår i: Physica Scripta. - : IOP PUBLISHING LTD. - 0031-8949 .- 1402-4896. ; T171:1
-
Tidskriftsartikel (refereegranskat)abstract
- A build-up of co-deposits in remote areas of the divertor can contribute significantly to the overall fuel retention. The control of plasma-material interactions via the study and understanding of erosion-deposition of PFCs provides vital information for the efficient future operation of ITER. The major aim of this work is to reveal details of beryllium deposition and fuel (deuterium) retention on divertor plasma-facing components removed from the JET ITER-Like Wall divertor after cumulative exposure during the first two (ILW-1+2) and all three (ILW-1+2+3) campaigns. Ion beam analysis techniques such as Rutherford backscattering spectrometry, nuclear reaction analysis and proton induced x-ray emission have been extensively used for post-mortem analyses of selected tiles from JET following each campaign and can provide relevant information on plasma-surface interactions like tungsten erosion, beryllium deposition and plasma fuel retention with divertor tiles via implantation or co-deposition. The studied divertor tiles represent a unique set of samples, which have been exposed to plasmas since the beginning of the JET-ILW operation for three successive plasma campaigns. This is a comprehensive comparison of divertor components after these operation periods. The results presented summarise deposition and fuel retention on Tiles 4 (inner base) and 6 (outer base). Although the deposition pattern is similar to that determined after individual campaigns, D retention is not a cumulative process and is determined mainly by the last campaign, and the total Be deposit after the 3 campaigns (i.e. data 1+2+3=tile exposed 2011-2016) is less than the sum of the deposits after each individual campaign (sum 1+2+3) for Tile 4 but greater for Tile 6.
|
|
