| 1. |
- Apelgren, Peter, et al.
(författare)
-
Biomaterial and biocompatibility evaluation of tunicate nanocellulose for tissue engineering.
- 2022
-
Ingår i: Biomaterials advances. - : Elsevier BV. - 2772-9508. ; 137
-
Tidskriftsartikel (refereegranskat)abstract
- Extracellular matrix fibril components, such as collagen, are crucial for the structural properties of several tissues and organs. Tunicate-derived cellulose nanofibrils (TNC) combined with living cells could become the next gold standard for cartilage and soft-tissue repair, as TNC fibrils present similar dimensions to collagen, feasible industrial production, and chemically straightforward and cost-efficient extraction procedures. In this study, we characterized the physical properties of TNC derived from aquaculture production in Norwegian fjords and evaluated its biocompatibility regarding induction of an inflammatory response and foreign-body reactions in a Wistar rat model. Additionally, histologic and immunohistochemical analyses were performed for comparison with expanded polytetrafluoroethylene (ePTFE) as a control. The average length of the TNC as determined by atomic force microscopy was tunable from 3μm to 2.4μm via selection of a various number of passages through a microfluidizer, and rheologic analysis showed that the TNC hydrogels were highly shear-thinning and with a viscosity dependent on fibril length and concentration. As a bioink, TNC exhibited excellent rheological and printability properties, with constructs capable of being printed with high resolution and fidelity. We found that post-print cross-linking with alginate stabilized the construct shape and texture, which increased its ease of handling during surgery. Moreover, after 30days in vivo, the constructs showed a highly-preserved shape and fidelity of the grid holes, with these characteristics preserved after 90days and with no signs of necrosis, infection, acute inflammation, invasion of neutrophil granulocytes, or extensive fibrosis. Furthermore, we observed a moderate foreign-body reaction involving macrophages, lymphocytes, and giant cells in both the TNC constructs and PTFE controls, although TNC was considered a non-irritant biomaterial according to ISO 10993-6 as compared with ePTFE. These findings represent a milestone for future clinical application of TNC scaffolds for tissue repair. One sentence summary: In this study, the mechanical properties of tunicate nanocellulose are superior to nanocellulose extracted from other sources, and the biocompatibility is comparable to that of ePTFE.
|
|
| 2. |
- Kjesbu, Joachim S., et al.
(författare)
-
Alginate and tunicate nanocellulose composite microbeads – Preparation, characterization and cell encapsulation
- 2022
-
Ingår i: Carbohydrate Polymers. - : Elsevier BV. - 0144-8617. ; 286
-
Tidskriftsartikel (refereegranskat)abstract
- Alginate has been used for decades for cell encapsulation. Cellulose nanofibrils (CNF) from tunicates are desirable in biomedicine due to high molecular weight, purity, crystallinity, and sustainable production. We prepared microbeads of 400–600 μm of alginate and tunicate CNF. Greater size, dispersity and aspect ratio were observed in microbeads with higher fractions of CNF. CNF content in Ca-crosslinked alginate microbeads decreased stability upon saline exposure, whereas crosslinking with calcium (50 mM) and barium (1 mM) yielded stable microbeads. The Young's moduli of gel cylinders decreased when exchanging alginate with CNF, and slightly increased permeability to dextran was observed in microbeads containing CNF. Encapsulation of MC3T3 cells revealed high cell viability after encapsulation (83.6 ± 0.4%) in beads of alginate and CNF. NHDFs showed lower viability but optimizing mixing and production techniques of microbeads increased cell viability (from 66.2 ± 5.3% to 72.7 ± 7.5%).
|
|
| 3. |
|
|
| 4. |
- Sämfors, Sanna, 1987, et al.
(författare)
-
Design and biofabrication of a leaf-inspired vascularized cell-delivery device
- 2022
-
Ingår i: Bioprinting. - : Elsevier BV. - 2405-8866. ; 26
-
Tidskriftsartikel (refereegranskat)abstract
- We designed and biofabricated a channeled construct as a possible cell-delivery device that can be endothelialized to overcome size limitations due to oxygen diffusion. The channeled device mimicking a leaf was designed using computer-aided design software, with fluid flow through the channels visualized using simulation studies. The device was fabricated either by form casting using a custom 3D-printed plastic mold or by 3D-bioprinting using Pluronic F-127 as sacrificial ink to print the channels. The actual leaf was cast or bioprinted using hydrogel made from a mixture of tunicate cellulose nanofibers and alginate that was cross-linked in calcium chloride solution to allow a stable device. The resulting device was a 20 × 8 × 3 mm or 35 × 18 × 3 mm (length × width × height) leaf with one main channel connected to several side channels. Surface modification using periodate oxidation, followed by laminin bioconjugation, was performed to enhance endothelial cell adhesion in the channels. We subsequently used human umbilical vein endothelial cells to demonstrate the efficacy of the device for promoting endothelialization. These results indicated that the biofabricated device has great potential for use in tissue-engineering for various applications associated with the need of perfusable vasculature.
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Zboinska, Malgorzata, 1981, et al.
(författare)
-
BioArchitecture: New Futures of Sustainable Living
- 2022
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- Public exhibition and lecture at the International Science Festival, Vetenskapsfestivalen 2022, in Gothenburg, Sweden. The presentation provides glimpses of an unknown future of living surrounded by architectural structures made from sustainable biomaterials. Audience is encouraged to reflect and create their own imaginings of such a future by experiencing physical samples representing fragments of architectural objects from such materials, 3D printed using digital machines and industrial robots. In the lecture, an unusual research collaboration between seemingly unrelated disciplines - architecture and chemistry - is discussed. The aim is to demonstrate how a crossover between artistic design, digital technology and natural sciences creates unprecedented opportunities for innovation. Such innovation relates to a sustainable future in which waste from the Swedish forestry industry is transformed into a novel material with great potentials for new applications in architecture and built environment.
|
|
