| 1. |
- Hadi, Seyed Ehsan, et al.
(författare)
-
Highly magnetic hybrid foams based on aligned tannic acid-coated iron oxide nanoparticles and TEMPO-oxidized cellulose nanofibers
- 2023
-
Ingår i: RSC Advances. - 2046-2069. ; 13:20, s. 13919-13927
-
Tidskriftsartikel (refereegranskat)abstract
- Lightweight iron oxide nanoparticle (IONP)/TEMPO-oxidized cellulose nanofibril (TOCNF) hybrid foams with an anisotropic structure and a high IONP content were produced using magnetic field-enhanced unidirectional ice-templating. Coating the IONP with tannic acid (TA) improved the processability, the mechanical performance, and the thermal stability of the hybrid foams. Increasing the IONP content (and density) increased the Young's modulus and toughness probed in compression, and hybrid foams with the highest IONP content were relatively flexible and could recover 14% axial compression. Application of a magnetic field in the freezing direction resulted in the formation of IONP chains that decorated the foam walls and the foams displayed a higher magnetization saturation, remanence, and coercivity compared to the ice-templated hybrid foams. The hybrid foam with an IONP content of 87% displayed a saturation magnetization of 83.2 emu g−1, which is 95% of the value for bulk magnetite. Highly magnetic hybrid foams are of potential interest for environmental remediation, energy storage, and electromagnetic interference shielding.
|
|
| 2. |
- Almenara Perez, Naroa, et al.
(författare)
-
Lignin–Chitosan Gel Polymer Electrolytes for Stable Zn Electrodeposition
- 2023
-
Ingår i: ACS Sustainable Chemistry and Engineering. - : American Chemical Society (ACS). - 2168-0485. ; 11:6, s. 2283-2294
-
Tidskriftsartikel (refereegranskat)abstract
- Electrochemical energy storage technologies offer means to transition toward a decarbonized society and carbon neutrality by 2050. Compared to conventional lithium-ion batteries, aqueous zinc-ion chemistries do not require scarce materials or toxic and flammable organic-based electrolytes to function, making them favorable contenders in the scenario of intensifying climate change and supply chain crisis. However, environmentally benign and bio-based materials are needed to substitute fossil-based battery materials. Accordingly, this work taps into the possibilities of lignin together with chitosan to form gel polymer electrolytes (GPEs) for zinc-ion chemistries. A simple fabrication process enabling free-standing sodium lignosulfonate–chitosan and micellar lignosulfonate–kraft lignin–chitosan GPEs with diameters exceeding 80 mm is developed. The GPEs combine tensile strength with ductility, reaching Young’s moduli of 55 ± 4 to 940 ± 63 MPa and elongations at break of 14.1 ± 0.2 to 43.9 ± 21.1%. Competitive ionic conductivities ranging from 3.8 to 18.6 mS cm–1 and electrochemical stability windows of up to +2.2 V vs Zn2+/Zn were observed. Given the improved interfacial adhesion of the GPEs with metallic Zn promoted by the anionic groups of the lignosulfonate, a stable cycling of the Zn anode is obtained. As a result, GPEs can operate at 5000 μA cm–2 with no short-circuit and Coulombic efficiencies above 99.7%, outperforming conventional separator–liquid electrolyte configurations such as the glass microfiber separator soaked into 2 M ZnSO4 aqueous electrolyte, which short-circuits after 100 μA cm–2. This work demonstrates the potential of underutilized biorefinery side-streams and marine waste as electrolytes in the battery field, opening new alternatives in the sustainable energy storage landscape beyond LIBs.
|
|
| 3. |
- Ferruti, Federica, et al.
(författare)
-
Recombinatorial approach for the formation of surface-functionalised alkaline-stable lignin nanoparticles and adhesives
- 2023
-
Ingår i: Green Chemistry. - : Royal Society of Chemistry (RSC). - 1463-9262 .- 1463-9270. ; 25:2, s. 639-649
-
Tidskriftsartikel (refereegranskat)abstract
- Lignin nanoparticles (LNPs) are considered as intriguing green, renewable alternatives to fossil-based nanomaterials. However, the predisposition of LNPs to dissolve under alkaline conditions makes covalent surface functionalisation in the dispersion state difficult and limits applications demanding morphological stability under challenging pH conditions. Mechanistic studies suggest that during the formation of LNPs by nanoprecipitation the higher molecular weight fractions of lignin likely start precipitating first, while the low molecular weight fractions tend to deposit later and thus locate on the outer shell. Capitalising this aggregation pattern, the present work presents a strategy to prepare surface-functionalised LNPs that can find applications as adhesives and alkaline stable LNPs. The entire process is based on a single-step solvent fractionation of lignin using either ethanol or ethyl acetate, subsequent functionalisation of selected fractions with epichlorohydrin, and recombination according to the original mass proportions in line with the so-called zero waste principle. Aqueous colloidal dispersions of lignins were synthesised by nanoprecipitation of epoxidised low molecular weight (MW) fractions combined with the corresponding unmodified high MW ones, and vice versa. Upon thermal treatment, LNPs containing the epoxidised insoluble fraction underwent intraparticle crosslinking, proving dimensional stability at pH 12. Conversely, LNPs including epoxidised solvent-soluble fractions resulted in interparticle crosslinking upon heating, which confirmed the surface localisation of such low MW fractions. The latter system was exploited to develop green LNP-based adhesives for aminated glass with lap shear strength outperforming prior adhesive systems based on lignin particles.
|
|
| 4. |
- Lindenbeck, Lucie, et al.
(författare)
-
MoS2 nanoflower-decorated lignin nanoparticles for superior lubricant properties
- 2023
-
Ingår i: Nanoscale. - : Royal Society of Chemistry (RSC). - 2040-3364 .- 2040-3372. ; :20
-
Tidskriftsartikel (refereegranskat)abstract
- Lignin has been, for a long time, treated as a low-value waste product. To change this scenario, high-value applications have been recently pursued, e.g., the preparation of hybrid materials with inorganic components. Although hybrid inorganic-based materials can benefit from the reactive lignin phenolic groups at the interface, often responsible for optimizing specific properties, this is still an underexplored field. Here, we present a novel and green material based on the combination of hydroxymethylated lignin nanoparticles (HLNPs) with molybdenum disulfide (MoS2) nanoflowers grown via a hydrothermal route. By bringing together the lubricant performance of MoS2 and the structural stability of biomass-based nanoparticles, a MoS2-HLNPs hybrid is presented as a bio-derived additive for superior tribological performances. While FT-IR analysis confirmed the structural stability of lignin after the hydrothermal growth of MoS2, TEM and SEM micrographs revealed a homogeneous distribution of MoS2 nanoflowers (average size of 400 nm) on the HLNPs (average size of 100 nm). Regarding the tribological tests, considering a pure oil as reference, only HLNPs as bio-derived additives led to a reduction in the wear volume of 18%. However, the hybrid of MoS2-HLNPs led to a considerably higher reduction (71%), pointing out its superior performance. These results open a new window of opportunity for a versatile and yet underexplored field that can pave the way for a new class of biobased lubricants.
|
|
| 5. |
- Liu, Jinrong, 1995-, et al.
(författare)
-
Ag-lignin hybrid nanoparticles for high-performance solar absorption in photothermal antibacterial chitosan films
- 2023
-
Ingår i: iScience. - 2589-0042. ; 26:10
-
Tidskriftsartikel (refereegranskat)abstract
- There is an urgent need for antimicrobial films based on sustainable resources and production methods. In this study, we present a bio-based nanocomposite film composed of chitosan (∼60 wt %), lignin nanoparticles (LNPs, ∼40 wt %), a small amount of glutaraldehyde (1.5 wt %), and a trace level of silver nanoparticles (AgNPs, 0.072 wt %). The uniform dispersion with LNPs prevented aggregation of metallic silver, resulting in small (diameter 3.3 nm) AgNPs. The nanocomposite film absorbs 89% of radiation across the entire solar spectrum and exhibits a remarkable photothermally triggered antibacterial effect, which is further enhanced by the dark color of lignin. Under simulated solar light illumination, the nanocomposite films demonstrated a significant reduction in viable Escherichia coli count compared to control scenarios. The potential applications of these nanocomposites extend to sunlight-activated antimicrobial films and coatings, addressing the growing demand for sustainable and effective antimicrobial materials.
|
|
| 6. |
- Liu, Jinrong, 1995-, et al.
(författare)
-
Photonic crystals with rainbow colors by centrifugation-assisted assembly of colloidal lignin nanoparticles
- 2023
-
Ingår i: Nature Communications. - 2041-1723. ; 14
-
Tidskriftsartikel (refereegranskat)abstract
- Photonic crystals are optical materials that are often fabricated by assembly of particles into periodically arranged structures. However, assembly of lignin nanoparticles has been limited due to lacking methods and incomplete understanding of the interparticle forces and packing mechanisms. Here we show a centrifugation-assisted fabrication of photonic crystals with rainbow structural colors emitted from the structure covering the entire visible spectrum. Our results show that centrifugation is crucial for the formation of lignin photonic crystals, because assembly of lignin nanoparticles without centrifugation assistance leads to the formation of stripe patterns rather than photonic crystals. We further prove that the functions of centrifugation are to classify lignin nanoparticles according to their particle size and produce monodispersed particle layers that display gradient colors from red to violet. The different layers of lignin nanoparticles were assembled in a way that created semi-closed packing structures, which gave rise to coherent scattering. The diameter of the lignin nanoparticles in each color layer is smaller than that predicted by a modified Bragg’s equation. In situ optical microscope images provided additional evidence on the importance of dynamic rearrangement of lignin nanoparticles during their assembly into semi-closed packing structures. The preparation of lignin nanoparticles combined with the methodology for their classification and assembly pave the way for sustainable photonic crystals.
|
|
| 7. |
- Liu, Liyang, 1990-, et al.
(författare)
-
Solventless Amination of Lignin and Natural Phenolics using 2-Oxazolidinone
- 2023
-
Ingår i: ChemSusChem. - : Wiley. - 1864-5631 .- 1864-564X. ; 16:15
-
Tidskriftsartikel (refereegranskat)abstract
- Reactive amine compounds are critical for a vast array of useful chemicals in society, yet a limited number of them are derived from renewable resources. This study developed an efficient route to obtain aminated building blocks from phenolic resources derived from nature, such as lignin and tannic acid, for enhancing their utility in applications such as epoxy resins, nylons, polyurethanes, and other polymeric materials. The reaction utilized a carbon storage compound, 2-oxazolidinone as a solvent and as a reagent circumventing the need of hazardous chemistry of conventional amination routes such as those involving formaldehyde. Both free acids and hindered phenolics were readily converted into aminoethyl derivatives resulting in aromatics with primary amine functionality. The aminated compounds, with the potential for enhanced reactivity, can pave the way toward more advanced renewable building blocks.
|
|
| 8. |
- Moreno, Adrian, et al.
(författare)
-
Breathable Lignin Nanoparticles as Reversible Gas Swellable Nanoreactors
- 2023
-
Ingår i: Small. - : Wiley. - 1613-6810 .- 1613-6829. ; 19:7
-
Tidskriftsartikel (refereegranskat)abstract
- The design of stimuli-responsive lignin nanoparticles (LNPs) for advanced applications has hitherto been limited to the preparation of lignin-grafted polymers in which usually the lignin content is low (<25 wt.%) and its role is debatable. Here, the preparation of O2-responsive LNPs exceeding 75 wt.% in lignin content is shown. Softwood Kraft lignin (SKL) is coprecipitated with a modified SKL fluorinated oleic acid ester (SKL-OlF) to form colloidal stable hybrid LNPs (hy-LNPs). The hy-LNPs with a SKL-OlF content ranging from 10 to 50 wt.% demonstrated a reversible swelling behavior upon O2/N2 bubbling, increasing their size – ≈35% by volume – and changing their morphology from spherical to core-shell. Exposition of hy-LNPs to O2 bubbling promotes a polarity change on lignin-fluorinated oleic chains, and consequently their migration from the inner part to the surface of the particle, which not only increases the particle size but also endows hy-LNPs with enhanced stability under harsh conditions (pH < 2.5) by the hydration barrier effect. Furthermore, it is also demonstrated that these new stimuli-responsive particles as gas tunable nanoreactors for the synthesis of gold nanoparticles. Combining a straightforward preparation with their enhanced stability and responsiveness to O2 gas these new LNPs pave the way for the next generation of smart lignin-based nanomaterials.
|
|
| 9. |
- Moreno, Adrian, et al.
(författare)
-
Urushi as a Green Component for Thermally Curable Colloidal Lignin Particles and Hydrophobic Coatings
- 2023
-
Ingår i: ACS Macro Letters. - 2161-1653. ; 12:6, s. 759-766
-
Tidskriftsartikel (refereegranskat)abstract
- Colloidal lignin nanoparticles are promising buildingblocks forsustainable functional materials. However, their instability in organicsolvents and aqueous alkali limits their applicability. Current stabilizationmethods require nonrenewable and toxic reagents or tedious workupprocedures. Here we show a method to prepare hybrid nanoparticlesusing only natural components. Urushi, a form of black oriental lacquer,and lignin are coaggregated to form hybrid particles, with Urushiacting as a sustainable component that stabilizes the particles viahydration barrier effect and thermally triggered internal cross-linking.The weight fractions of the two components can be adjusted to achievethe desired level of stabilization. Hybrid particles with Urushi content>25 wt % undergo interparticle cross-linking that produces multifunctionalhydrophobic protective coatings that improve the water resistanceof wood. This approach provides a sustainable and efficient methodfor stabilizing lignin nanoparticles and opens up neoteric possibilitiesfor the development of lignin-based advanced functional materials.
|
|
| 10. |
- Qi, Yungeng, et al.
(författare)
-
Nanocellulose : a review on preparation routes and applications in functional materials
- 2023
-
Ingår i: Cellulose. - 0969-0239 .- 1572-882X. ; 30:7, s. 4115-4147
-
Forskningsöversikt (refereegranskat)abstract
- Nanocellulose has a wide range of applications in the field of functional materials, and it has piqued the interest of researchers for some time. This is because nanocellulose inherits the advantages of environmental friendliness and easy availability of plant cell walls in nature, as well as the unique morphology of nanostructures. This review presents four types of nanocellulose including cellulose nanocrystals (CNCs), cellulose nanofibrils (CNFs), regenerated nanocellulose (RNC) and bacterial cellulose (BC), introduces the different preparation routes and their mechanisms, analyzes the advantages and drawbacks between these approaches, and summarizes the potential applications in the field of functional materials such as reinforced composite materials, biomedical materials, soft templates, and optical materials. Finally, future development directions are proposed including further enrichment of nanocellulose raw materials, improvement of preparation methods to adapt to more diversified raw materials, and classification of products according to their morphology and properties to improve the use efficiency.
|
|
