| 1. |
- Khalili, Pooria, et al.
(författare)
-
Mechanical Properties of Bio-Based Sandwich Composites Containing Recycled Polymer Textiles
- 2023
-
Ingår i: Polymers. - 2073-4360. ; 15:18, s. 1-14
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, sandwich composites were produced by compression moulding techniques, and they consisted of regenerated cellulose fabric (rayon) and bio-based polypropylene (PP) to form facings, while virgin and recycled polyamide (PA) textiles were used as core materials. To compare the mechanical performance between sandwich composites and typical composite designs, a control composite was produced to deliver the same weight and fiber mass fraction from rayon and PP. To evaluate the influence of recycled textile on the mechanical properties of the composites, a series of flexural, low velocity impact (LVI) and tensile tests were performed. It was found that the incorporation of thicker PA textile enhanced the bending stiffness by two times and the peak flexural force by 70% as compared to those of control. Substitution of a layer of recycled textile for two layers of rayon provided a good level of impact energy absorption capacity (~28 J) and maximum force (~4893–5229 N). The tensile strength of the four sandwich composites was reported to be in the range of 34.20 MPa and 46.80 MPa. This value was 91.90 for the control composite. The 2D cross-section slices of the composite specimens did not show any evidence of fiber tow debonding, fiber bundle splitting, or delamination.
|
|
| 2. |
- Åkesson, Dan, 1970-, et al.
(författare)
-
Thermo-oxidative aging of high-density polyethylene reinforced with multiwalled carbon nanotubes
- 2021
-
Ingår i: Journal of Applied Polymer Science. - : College of William and Mary. - 0021-8995 .- 1097-4628. ; 138:26
-
Tidskriftsartikel (refereegranskat)abstract
- The purpose of this study was to investigate the influence of aging on the properties of high-density polyethylene (HDPE) reinforced with multi-wall carbon nanotubes (MWCNTs). Nanocomposites were prepared with nanotubes at 0, 1, 3, and 5 wt%. The long-term durability of the prepared materials was evaluated by thermo-oxidative aging test. Test bodies were aged at 110°C for up to 10 weeks. The nanocomposites were characterized by differential scanning calometry, thermogravimetric analysis (TGA), 13C-NMR, elongation at break, and transmission electron microscopy. The aging mainly occurred on the surface of the samples and the neat HDPE showed a strong yellowing after the aging. A strong reduction in elongation at break was seen. For neat HDPE, the elongation at break was reduced from roughly 1400–25%. When HDPE was reinforced with the nanotubes, the reduction was less dramatic
|
|
| 3. |
- Akbari, Samira, et al.
(författare)
-
Novel Bio-based Branched Unsaturated Polyester Resins for High-Temperature Applications
- 2023
-
Ingår i: Journal of Polymers and the Environment. - 1566-2543 .- 1572-8919.
-
Tidskriftsartikel (refereegranskat)abstract
- Unsaturated polyester resins, one of the most important thermosets, are invariably produced from oil-based monomers. Their application is limited in areas where high thermal stability is required due to their low Tg. Besides, these resins contain 30–40% hazardous styrene as a reactive solvent. Therefore, developing bio-based solventless unsaturated polyester resin with medium to high thermomechanical properties compared to petrochemical-based counterparts is important. In order to achieve this, a series of branched bio-based unsaturated polyester resins were synthesized using bulk polymerization method in two steps. In the first step, four different intermediates were prepared by reacting glycerol (as a core molecule) with either isosorbide (diol), 1,3-propanediol (diol), 2,5-furandicarboxylic acid (saturated diacid), or adipic acid (saturated diacid). In the second step, the branched intermediate was end capped with methacrylic anhydride to introduce reactive sites for cross-linking on the branch ends. The chemical structure of the resins was characterized by 13C-NMR. FT-IR confirmed the polycondensation reaction in the first step and the end functionalization of the resins with methacrylic anhydride in the second step. The effect of 2,5-furandicarboxylic acid and isosorbide on thermomechanical and thermal properties was investigated using dynamic mechanical analysis, differential scanning calorimetry, and thermo-gravimetric analysis. Results indicated that 2,5-furandicarboxylic acid based resins had superior thermomechanical properties compared to a commercial reference unsaturated polyester resin, making them promising resins for high-temperature composite applications. For example, the resin based on 2,5-furandicarboxylic acid and isosorbide and the resin based on 2,5-furandicarboxylic acid and 1,3-propanediol gave glass transition temperatures of 173 °C and 148 °C, respectively. Although the synthesized 2,5-furandicarboxylic acid based resins had higher viscosity (22.7 Pas) than conventional unsaturated polyester (0.4–0.5 Pas) at room temperature, preheated resins can be used for making high-temperature-tolerance fiber-reinforced composite.
|
|
| 4. |
- Arya, Mina, et al.
(författare)
-
Enhancing Sustainability: Jute Fiber-Reinforced Bio-Based Sandwich Composites for Use in Battery Boxes
- 2023
-
Ingår i: Polymers. - : Multidisciplinary Digital Publishing Institute (MDPI). - 2073-4360. ; 15:18
-
Tidskriftsartikel (refereegranskat)abstract
- The rising industrial demand for environmentally friendly and sustainable materials has shifted the attention from synthetic to natural fibers. Natural fibers provide advantages like affordability, lightweight nature, and renewability. Jute fibers’ substantial production potential and cost-efficiency have propelled current research in this field. In this study, the mechanical behavior (tensile, flexural, and interlaminar shear properties) of plasma-treated jute composite laminates and the flexural behavior of jute fabric-reinforced sandwich composites were investigated. Non-woven mat fiber (MFC), jute fiber (JFC), dried jute fiber (DJFC), and plasma-treated jute fiber (TJFC) composite laminates, as well as sandwich composites consisting of jute fabric bio-based unsaturated polyester (UPE) composite as facing material and polyethylene terephthalate (PET70 and PET100) and polyvinyl chloride (PVC) as core materials were fabricated to compare their functional properties. Plasma treatment of jute composite laminate had a positive effect on some of the mechanical properties, which led to an improvement in Young’s modulus (7.17 GPa) and tensile strength (53.61 MPa) of 14% and 8.5%, respectively, as well as, in flexural strength (93.71 MPa) and flexural modulus (5.20 GPa) of 24% and 35%, respectively, compared to those of JFC. In addition, the results demonstrated that the flexural properties of jute sandwich composites can be significantly enhanced by incorporating PET100 foams as core materials.
|
|
| 5. |
- Baghaei, Behnaz, 1986-, et al.
(författare)
-
All-Cellulose Composites: A Review of RecentStudies on Structure, Properties and Applications
- 2020
-
Ingår i: Molecules. - Borås : MDPI AG. - 1431-5157 .- 1420-3049. ; 25:2
-
Tidskriftsartikel (refereegranskat)abstract
- Nowadays, there is greater demand for greener materials in societies due to environmental consciousness, depleting fossil fuels and growing ecological concerns. Within the foreseeable future, industries and suppliers will be required to be more aware of challenges faced due to the availability of resources and use more sustainable and renewable raw materials. In this context, cellulose can be expected to become a vital resource for materials owing to its abundance, versatility as a biopolymer, several different forms and potential applications. Thus, all-cellulose composites (ACCs) have gained significant research interest in recent years. ACC is a class of biocomposites in which the matrix is a dissolved and regenerated cellulose, while the reinforcement is undissolved or partly dissolved cellulose. This review paper is intended to provide a brief outline of works that cover recent progress in the manufacturing and processing techniques for ACCs, various cellulose sources, solvents and antisolvents, as well as their properties.
|
|
| 6. |
- Baghaei, Behnaz, 1986-, et al.
(författare)
-
All-Cellulose Composites Properties from Pre- and Post-Consumer Denim Wastes: Comparative Study
- 2022
-
Ingår i: Journal of Composites Science. - : MDPI AG. - 2504-477X. ; 6:5
-
Tidskriftsartikel (populärvet., debatt m.m.)abstract
- This study reports the recycling of discarded denim textiles by the production of all-cellulose composites (ACCs). Discarded denim fabrics were shredded into fibers and then made into nonwoven fabrics by carding and needle punching. The produced nonwoven fabrics were converted to ACCs by one-step and two-step methods using an ionic liquid (IL), 1-butyl-3-methyl imidazolium acetate ([BMIM][Ac]). In this study, the effect of different ACC manufacturing methods, denim fabrics with different contents (a 100% cotton denim (CO) and a blend material (cotton, poly-ester and elastane (BCO)) and reusing of IL as a recycled cellulose solvent on the mechanical pro-perties of the formed ACCs were investigated. The ACCs were characterized according to their tensile and impact properties, as well as their void content. Microscopic analysis was carried out to study the morphology of a cross-section of the formed composites. The choice of the one-step method with recycled IL, pure IL or with a blend material (BCO) had no influence on the tensile properties. Instead, the result showed that the two-step method, with and without DMSO, will influence the E-modulus but not the tensile strength. Regarding the impact properties of the samples, the only factor likely to influence the impact energy was the one-step method with CO and BCO.
|
|
| 7. |
- Baghaei, Behnaz, 1986-, et al.
(författare)
-
Mechanical properties of all-cellulose composites from end-of-life textiles
- 2020
-
Ingår i: Journal of polymer research. - : Springer. - 1022-9760 .- 1572-8935. ; 27:9
-
Tidskriftsartikel (refereegranskat)abstract
- This paper reports the recycling of end-of-life cellulose containing textiles by fabrication of all-cellulose composites (ACCs). Discharged denim fabrics were used as the reinforcement while dissolved cellulose from two different cellulose resources was used as the matrix phase. Virgin cotton fibres and recovered cotton from polyester/cotton (polycotton) waste fabrics were used to form the matrix phase. The process comprises preparing a 6 wt% cellulose solution by dissolving cellulose solution in a ionic liquid, 1-butyl-3-methyl imidazolium acetate ([BMIM][Ac]), this solution acted as a precursor for the matrix component. The denim fabrics were first embedded in the cellulose/IL solution followed by removal of the IL by washing to form the composite. The effect of reuse of the recovered IL by distillation was also investigated. The mechanical properties of the obtained ACCs were determined regarding tensile, impact and flexural properties. Fabricated ACC composite laminates were further characterised regarding structure by scanning electron microscopy.
|
|
| 8. |
- Darabi, Sozan, 1994, et al.
(författare)
-
Green Conducting Cellulose Yarns for Machine-Sewn Electronic Textiles
- 2020
-
Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 12:50, s. 56403-56412
-
Tidskriftsartikel (refereegranskat)abstract
- The emergence of "green"electronics is a response to the pressing global situation where conventional electronics contribute to resource depletion and a global build-up of waste. For wearable applications, green electronic textile (e-textile) materials present an opportunity to unobtrusively incorporate sensing, energy harvesting, and other functionality into the clothes we wear. Here, we demonstrate electrically conducting wood-based yarns produced by a roll-to-roll coating process with an ink based on the biocompatible polymer:polyelectrolyte complex poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS). The developed e-textile yarns display a, for cellulose yarns, record-high bulk conductivity of 36 Scm-1, which could be further increased to 181 Scm-1 by adding silver nanowires. The PEDOT:PSS-coated yarn could be machine washed at least five times without loss in conductivity. We demonstrate the electrochemical functionality of the yarn through incorporation into organic electrochemical transistors (OECTs). Moreover, by using a household sewing machine, we have manufactured an out-of-plane thermoelectric textile device, which can produce 0.2 μW at a temperature gradient of 37 K.
|
|
| 9. |
- de Sousa, Giulia Simão, et al.
(författare)
-
Thermo‐mechanical properties of polyethylene composites filled with soapstone waste
- 2023
-
Ingår i: Journal of Applied Polymer Science. - : John Wiley & Sons. - 0021-8995 .- 1097-4628.
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, soapstone waste originated from craftsmanship activities was used as an alternative filler (0–30 wt%) for a high-density polyethylene (PE) matrix. The aim of this paper is to understand the effect of the filler particles on crystallinity, thermal stability and thermo-mechanical properties of this newly developed composite material. Physico-chemical characterization was performed by x-ray diffraction (XRD) and Fourier-transform infrared (FTIR) spectroscopy. Thermogravimetric analysis (TGA), oxidation induction time (OIT) and dynamic mechanical thermal analysis (DMA) were performed to assess the effect of the filler on the themo-mechanical properties of PE. Thermal stability, measured by TGA, was enhanced, while OIT values reduced with filler content. A significant increase on the storage modulus of the composites (up to 148% in comparison with unfilled PE) was observed and this reinforcing effect was even more prominent at higher temperatures. XRD analysis revealed that the degree of crystallinity improved significantly with soapstone loading, which explains the substantial increase in stiffness observed. Increased crystallinity is also associated with higher strength, reduced residual stress, and better dimensional stability of end products, which can be particularly attractive for pressure pipe applications.
|
|
| 10. |
- Ehsanimehr, S., et al.
(författare)
-
Sustainable Flame-Retardant Flax Fabrics by Engineered Layer-by-Layer Surface Functionalization with Phytic Acid and Polyethylenimine
- 2023
-
Ingår i: Fire technology. - : Springer Science and Business Media LLC. - 0015-2684 .- 1572-8099.
-
Tidskriftsartikel (refereegranskat)abstract
- New generation of mission-oriented fabrics meets advanced requirements; such as electrical conductivity, flame retardancy, and anti-bacterial properties. However, sustainability concerns still are on-demand in fabrication of multi-functional fabrics. In this work, we used a bio-based phosphorus molecule (phytic acid, PA) to reinforce flax fabrics against flame via layer-by-layer consecutive surface modification. First, the flax fabric was treated with PA. Then, polyethylenimine (PEI) was localized above it to create negative charges, and finally PA was deposited as top-layer. Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX), and inductively-coupled plasma atomic emission spectrometry (ICP-AES) proved successful chemical treatment. Pyrolysis-combustion flow calorimetry (PCFC) showed significant drop by about 77% in the peak of heat release rate (pHRR) from 215 W/g for untreated to 50 W/g for treated flax fabric. Likewise, the total heat release (THR) decreased by more than three times from 11 to 3.2 kJ/g. Mechanical behavior of the treated flax fabric was completely different from untreated flax fabrics, changing from almost highly-strengthened behavior with short elongation at break to a rubber-like behavior with significantly higher elongation at break. Surface friction resistance was also improved, such that the abrasion resistance of the modified fabrics increased up to 30,000 rub cycles without rupture.
|
|
