1. |
- Mantione, Daniele, et al.
(författare)
-
Thiophene-Based Trimers for In Vivo Electronic Functionalization of Tissues
- 2020
-
Ingår i: ACS APPLIED ELECTRONIC MATERIALS. - : AMER CHEMICAL SOC. - 2637-6113. ; 2:12, s. 4065-4071
-
Tidskriftsartikel (refereegranskat)abstract
- Electronic materials that can self-organize in vivo and form functional components along the tissue of interest can result in a seamless integration of the bioelectronic interface. Previously, we presented in vivo polymerization of the conjugated oligomer ETE-S in plants, forming conductors along the plant structure. The EDOT-thiophene-EDOT trimer with a sulfonate side group polymerized due to the native enzymatic activity of the plant and integrated within the plant cell wall. Here, we present the synthesis of three different conjugated trimers based on thiophene and EDOT or purely EDOT trimers that are able to polymerize enzymatically in physiological pH in vitro as well as in vivo along the roots of living plants. We show that by modulating the backbone and the side chain, we can tune the electronic properties of the resulting polymers as well as their localization and penetration within the root. Our work paves the way for the rational design of electronic materials that can self-organize in vivo for spatially controlled electronic functionalization of living tissue.
|
|
2. |
- Ait-Mammar, Walid, et al.
(författare)
-
All-Inkjet-Printed Humidity Sensors for the Detection of Relative Humidity in Air and Soil-Towards the Direct Fabrication on Plant Leaves
- 2020
-
Ingår i: MRS Advances. - : CAMBRIDGE UNIV PRESS. - 2059-8521. ; 5:18-19, s. 965-973
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate the fabrication, by exclusive means of inkjet-printing, of capacitive relative humidity sensors on flexible, plastic substrate. These sensors can be successfully used for the measurement of relative-humidity in both air and common soil. We also show that the same technique may be used for the fabrication of the same type of sensors on the surface of the leaves of El AE gnus Ebbingei (silverberry).Our results demonstrate the suitability of leaves as substrate for printed electronics and pave the way to the next generation of sensors to be used in fields such as agriculture and flower farming.
|
|
3. |
- Diacci, Chiara, et al.
(författare)
-
Real-Time Monitoring of Glucose Export from Isolated Chloroplasts Using an Organic Electrochemical Transistor
- 2020
-
Ingår i: Advanced Materials Technologies. - : Wiley-VCH Verlagsgesellschaft. - 2365-709X. ; 5:3
-
Tidskriftsartikel (refereegranskat)abstract
- Biosensors based on organic electrochemical transistors (OECT) are attractive devices for real-time monitoring of biological processes. The direct coupling between the channel of the OECT and the electrolyte enables intimate interfacing with biological environments at the same time bringing signal amplification and fast sensor response times. So far, these devices are mainly applied to mammalian systems; cells or body fluids for the development of diagnostics and various health status monitoring technology. Yet, no direct detection of biomolecules from cells or organelles is reported. Here, an OECT glucose sensor applied to chloroplasts, which are the plant organelles responsible for the light-to-chemical energy conversion of the photosynthesis, is reported. Real-time monitoring of glucose export from chloroplasts in two distinct metabolic phases is demonstrated and the transfer dynamics with a time resolution of 1 min is quantified, thus reaching monitoring dynamics being an order of magnitude better than conventional methods.
|
|
4. |
- Dufil, Gwennael, et al.
(författare)
-
Enzyme-assisted in vivo polymerisation of conjugated oligomer based conductors
- 2020
-
Ingår i: Journal of materials chemistry. B. - : ROYAL SOC CHEMISTRY. - 2050-750X .- 2050-7518. ; 8:19, s. 4221-4227
-
Tidskriftsartikel (refereegranskat)abstract
- Conjugated polymers conduct both electronic and ionic carriers and thus can stimulate and translate biological signals when used as active materials in bioelectronic devices. Self- and on-demand organization of the active material directly in the in vivo environment can result in the seamless integration of the bioelectronic interface. Along that line, we recently demonstrated spontaneous in vivo polymerization of the conjugated oligomer ETE-S in the vascular tissue of plants and the formation of conducting wires. In this work, we elucidate the mechanism of the in vivo polymerization of the ETE-S trimer and demonstrate that ETE-S polymerizes due to an enzymatic reaction where the enzyme peroxidase is the catalyst and hydrogen peroxide is the oxidant. ETE-S, therefore, represents the first example of a conducting polymer that is enzymatically polymerized in vivo. By reproducing the reaction in vitro, we gain further insight on the polymerization mechanism and show that hydrogen peroxide is the limiting factor. In plants the ETE-S triggers the catalytic cycle responsible for the lignification process, hacks this biochemical pathway and integrates within the plant cell wall, forming conductors along the plant structure.
|
|
5. |
- Gladisch, Johannes, et al.
(författare)
-
Reversible Electronic Solid-Gel Switching of a Conjugated Polymer
- 2020
-
Ingår i: ADVANCED SCIENCE. - : WILEY. - 2198-3844. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- Conjugated polymers exhibit electrically driven volume changes when included in electrochemical devices via the exchange of ions and solvent. So far, this volumetric change is limited to 40% and 100% for reversible and irreversible systems, respectively, thus restricting potential applications of this technology. A conjugated polymer that reversibly expands by about 300% upon addressing, relative to its previous contracted state, while the first irreversible actuation can achieve values ranging from 1000-10 000%, depending on the voltage applied is reported. From experimental and theoretical studies, it is found that this large and reversible volumetric switching is due to reorganization of the polymer during swelling as it transforms between a solid-state phase and a gel, while maintaining percolation for conductivity. The polymer is utilized as an electroactive cladding to reduce the void sizes of a porous carbon filter electrode by 85%.
|
|
6. |
|
|
7. |
- Méhes, Gábor, et al.
(författare)
-
Organic Microbial Electrochemical Transistor Monitoring Extracellular Electron Transfer
- 2020
-
Ingår i: Advanced Science. - : WILEY. - 2198-3844. ; 7:15
-
Tidskriftsartikel (refereegranskat)abstract
- Extracellular electron transfer (EET) denotes the process of microbial respiration with electron transfer to extracellular acceptors and has been exploited in a range of microbial electrochemical systems (MESs). To further understand EET and to optimize the performance of MESs, a better understanding of the dynamics at the microscale is needed. However, the real-time monitoring of EET at high spatiotemporal resolution would require sophisticated signal amplification. To amplify local EET signals, a miniaturized bioelectronic device, the so-called organic microbial electrochemical transistor (OMECT), is developed, which includes Shewanella oneidensis MR-1 integrated onto organic electrochemical transistors comprising poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) combined with poly(vinyl alcohol) (PVA). Bacteria are attached to the gate of the transistor by a chronoamperometric method and the successful attachment is confirmed by fluorescence microscopy. Monitoring EET with the OMECT configuration is achieved due to the inherent amplification of the transistor, revealing fast time-responses to lactate. The limits of detection when using microfabricated gates as charge collectors are also investigated. The work is a first step toward understanding and monitoring EET in highly confined spaces via microfabricated organic electronic devices, and it can be of importance to study exoelectrogens in microenvironments, such as those of the human microbiome.
|
|
8. |
- Méhes, Gábor, et al.
(författare)
-
Solar Heat-Enhanced Energy Conversion in Devices Based on Photosynthetic Membranes and PEDOT:PSS-Nanocellulose Electrodes
- 2020
-
Ingår i: Advanced Sustainable Systems. - : Wiley-VCH Verlag. - 2366-7486. ; 4:1
-
Tidskriftsartikel (refereegranskat)abstract
- Energy harvesting from photosynthetic membranes, proteins, or bacteria through bio-photovoltaic or bio-electrochemical approaches has been proposed as a new route to clean energy. A major shortcoming of these and solar cell technologies is the underutilization of solar irradiation wavelengths in the IR region, especially those in the far IR region. Here, a biohybrid energy-harvesting device is demonstrated that exploits IR radiation, via convection and thermoelectric effects, to improve the resulting energy conversion performance. A composite of nanocellulose and the conducting polymer system poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is used as the anode in biohybrid cells that includes thylakoid membranes (TMs) and redox mediators (RMs) in solution. By irradiating the conducting polymer electrode by an IR light-emitting diode, a sixfold enhancement in the harvested bio-photovoltaic power is achieved, without compromising stability of operation. Investigation of the output currents reveals that IR irradiation generates convective heat transfer in the electrolyte bulk, which enhances the redox reactions of RMs at the anode by suppressing diffusion limitations. In addition, a fast-transient thermoelectric component, originating from the PEDOT:PSS-nanocellulose-electrolyte interphase, further increases the bio-photocurrent. These results pave the way for the development of energy-harvesting biohybrids that make use of heat, via IR absorption, to enhance energy conversion efficiency.
|
|
9. |
- Moser, Maximilian, et al.
(författare)
-
Side Chain Redistribution as a Strategy to Boost Organic Electrochemical Transistor Performance and Stability
- 2020
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 32
-
Tidskriftsartikel (refereegranskat)abstract
- A series of glycolated polythiophenes for use in organic electrochemical transistors (OECTs) is designed and synthesized, differing in the distribution of their ethylene glycol chains that are tethered to the conjugated backbone. While side chain redistribution does not have a significant impact on the optoelectronic properties of the polymers, this molecular engineering strategy strongly impacts the water uptake achieved in the polymers. By careful optimization of the water uptake in the polymer films, OECTs with unprecedented steady-state performances in terms of [mu C*] and current retentions up to 98% over 700 electrochemical switching cycles are developed.
|
|
10. |
- Paulsen, B.D., et al.
(författare)
-
Organic mixed ionic–electronic conductors
- 2020
-
Ingår i: Nature Materials. - : Nature Publishing Group. - 1476-1122 .- 1476-4660. ; 19, s. 13-26
-
Forskningsöversikt (refereegranskat)abstract
- Materials that efficiently transport and couple ionic and electronic charge are key to advancing a host of technological developments for next-generation bioelectronic, optoelectronic and energy storage devices. Here we highlight key progress in the design and study of organic mixed ionic–electronic conductors (OMIECs), a diverse family of soft synthetically tunable mixed conductors. Across applications, the same interrelated fundamental physical processes dictate OMIEC properties and determine device performance. Owing to ionic and electronic interactions and coupled transport properties, OMIECs demand special understanding beyond knowledge derived from the study of organic thin films and membranes meant to support either electronic or ionic processes only. We address seemingly conflicting views and terminology regarding charging processes in these materials, and highlight recent approaches that extend fundamental understanding and contribute to the advancement of materials. Further progress is predicated on multimodal and multi-scale approaches to overcome lingering barriers to OMIEC design and implementation.
|
|