SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Su Z. W.) srt2:(2005-2009)"

Sökning: WFRF:(Su Z. W.) > (2005-2009)

  • Resultat 1-10 av 10
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Schael, S, et al. (författare)
  • Precision electroweak measurements on the Z resonance
  • 2006
  • Ingår i: Physics Reports. - : Elsevier BV. - 0370-1573 .- 1873-6270. ; 427:5-6, s. 257-454
  • Forskningsöversikt (refereegranskat)abstract
    • We report on the final electroweak measurements performed with data taken at the Z resonance by the experiments operating at the electron-positron colliders SLC and LEP. The data consist of 17 million Z decays accumulated by the ALEPH, DELPHI, L3 and OPAL experiments at LEP, and 600 thousand Z decays by the SLID experiment using a polarised beam at SLC. The measurements include cross-sections, forward-backward asymmetries and polarised asymmetries. The mass and width of the Z boson, m(Z) and Gamma(Z), and its couplings to fermions, for example the p parameter and the effective electroweak mixing angle for leptons, are precisely measured: m(Z) = 91.1875 +/- 0.0021 GeV, Gamma(Z) = 2.4952 +/- 0.0023 GeV, rho(l) = 1.0050 +/- 0.0010, sin(2)theta(eff)(lept) = 0.23153 +/- 0.00016. The number of light neutrino species is determined to be 2.9840 +/- 0.0082, in agreement with the three observed generations of fundamental fermions. The results are compared to the predictions of the Standard Model (SM). At the Z-pole, electroweak radiative corrections beyond the running of the QED and QCD coupling constants are observed with a significance of five standard deviations, and in agreement with the Standard Model. Of the many Z-pole measurements, the forward-backward asymmetry in b-quark production shows the largest difference with respect to its SM expectation, at the level of 2.8 standard deviations. Through radiative corrections evaluated in the framework of the Standard Model, the Z-pole data are also used to predict the mass of the top quark, m(t) = 173(+10)(+13) GeV, and the mass of the W boson, m(W) = 80.363 +/- 0.032 GeV. These indirect constraints are compared to the direct measurements, providing a stringent test of the SM. Using in addition the direct measurements of m(t) and m(W), the mass of the as yet unobserved SM Higgs boson is predicted with a relative uncertainty of about 50% and found to be less than 285 GeV at 95% confidence level. (c) 2006 Elsevier B.V. All rights reserved.
  •  
2.
  • Aamodt, K., et al. (författare)
  • The ALICE experiment at the CERN LHC
  • 2008
  • Ingår i: Journal of Instrumentation. - 1748-0221. ; 3:S08002
  • Forskningsöversikt (refereegranskat)abstract
    • ALICE (A Large Ion Collider Experiment) is a general-purpose, heavy-ion detector at the CERN LHC which focuses on QCD, the strong-interaction sector of the Standard Model. It is designed to address the physics of strongly interacting matter and the quark-gluon plasma at extreme values of energy density and temperature in nucleus-nucleus collisions. Besides running with Pb ions, the physics programme includes collisions with lighter ions, lower energy running and dedicated proton-nucleus runs. ALICE will also take data with proton beams at the top LHC energy to collect reference data for the heavy-ion programme and to address several QCD topics for which ALICE is complementary to the other LHC detectors. The ALICE detector has been built by a collaboration including currently over 1000 physicists and engineers from 105 Institutes in 30 countries, Its overall dimensions are 16 x 16 x 26 m(3) with a total weight of approximately 10 000 t. The experiment consists of 18 different detector systems each with its own specific technology choice and design constraints, driven both by the physics requirements and the experimental conditions expected at LHC. The most stringent design constraint is to cope with the extreme particle multiplicity anticipated in central Pb-Pb collisions. The different subsystems were optimized to provide high-momentum resolution as well as excellent Particle Identification (PID) over a broad range in momentum, up to the highest multiplicities predicted for LHC. This will allow for comprehensive studies of hadrons, electrons, muons, and photons produced in the collision of heavy nuclei. Most detector systems are scheduled to be installed and ready for data taking by mid-2008 when the LHC is scheduled to start operation, with the exception of parts of the Photon Spectrometer (PHOS), Transition Radiation Detector (TRD) and Electro Magnetic Calorimeter (EMCal). These detectors will be completed for the high-luminosity ion run expected in 2010. This paper describes in detail the detector components as installed for the first data taking in the summer of 2008.
  •  
3.
  • Abdesselam, A., et al. (författare)
  • The ATLAS semiconductor tracker end-cap module
  • 2007
  • Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 575:3, s. 353-389
  • Tidskriftsartikel (refereegranskat)abstract
    • The challenges for the tracking detector systems at the LHC are unprecedented in terms of the number of channels, the required read-out speed and the expected radiation levels. The ATLAS Semiconductor Tracker. (SCT) end-caps have a total of about 3 million electronics channels each reading out every 25 ns into its own on-chip 3.3 mu s buffer. The highest anticipated dose after 10 years operation is 1.4x10(14) cm(-2) in units of 1 MeV neutron equivalent (assuming the damage factors scale with the non-ionising energy loss). The forward tracker has 1976 double-sided modules, mostly of area similar to 70 cm(2), each having 2 x 768 strips read out by six ASICs per side. The requirement to achieve an average perpendicular radiation length of 1.5% X-0, while coping with up to 7 W dissipation per module (after irradiation), leads to stringent constraints on the thermal design. The additional requirement of 1500e(-) equivalent noise charge (ENC) rising to only 1800e(-) ENC after irradiation, provides stringent design constraints on both the high-density Cu/Polyimide flex read-out circuit and the ABCD3TA read-out ASICs. Finally, the accuracy of module assembly must not compromise the 16 mu m (r phi) resolution perpendicular to the strip directions or 580 mu m radial resolution coming from the 40 mrad front-back stereo angle. A total of 2210 modules were built to the tight tolerances and specifications required for the SCT. This was 234 more than the 1976 required and represents a yield of 93%. The component flow was at times tight, but the module production rate of 40-50 per week was maintained despite this. The distributed production was not found to be a major logistical problem and it allowed additional flexibility to take advantage of where the effort was available, including any spare capacity, for building the end-cap modules. The collaboration that produced the ATLAS SCT end-cap modules kept in close contact at all times so that the effects of shortages or stoppages at different sites could be rapidly resolved.
  •  
4.
  • Abdallah, J, et al. (författare)
  • Charged particle multiplicity in three-jet events and two-gluon systems
  • 2005
  • Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; C:44, s. 311-331
  • Tidskriftsartikel (refereegranskat)abstract
    • The charged particle multiplicity in hadronic three-jet events from Z decays is investigated. The topology dependence of the event multiplicity is found to be well described by a modified leading logarithmic prediction. A parameter fit of the prediction to the data yields a measurement of the colour factor ratio C-A/C-F with the result C-A/C-F = 2.261 +/- 0.014(stat). +/- 0.036(exp). +/- 0-066(theo). in agreement with the SU(3) expectation of QCD. The quark-related contribution to the event multiplicity is subtracted from the three-jet event multiplicity resulting in a measurement of the multiplicity of two-gluon colour-singlet states over a wide energy range. The ratios r = N-gg(s)/Ng (g) over bar (s) of the gluon and quark multiplicities and r((1)) = N'(gg)(s)/N'g (g) over bar (s) of their derivatives are compared with perturbative calculations. While a good agreement between calculations and data is observed for r((1)), larger deviations are found for r indicating that non-perturbative effects are more important for r than for r((1)).
  •  
5.
  • Abdallah, J, et al. (författare)
  • Coherent soft particle production in Z decays into three jets
  • 2005
  • Ingår i: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - : Elsevier BV. - 0370-2693. ; 605:1-2, s. 37-48
  • Tidskriftsartikel (refereegranskat)abstract
    • Low-energy particle production perpendicular to the event plane in three-jet events produced in Z decays in e(+)e(-) annihilation is measured and compared to that perpendicular to the event axis in two-jet events. The topology dependence of the hadron production ratio is found to agree with a leading-order QCD prediction. This agreement and especially the need for the presence of a destructive interference term gives evidence for the coherent nature of gluon radiation. Hadron production in three-jet events is found to be directly proportional to a single topological scale function of the inter-jet angles. The slope of the dependence of the multiplicity with respect to the topological scale was measured to be 2.211 +/- 0.014(stat.) +/- 0.053(syst.) in good agreement with the expectation given by the colour-factor ratio C-A/C-F = 9/4. This result strongly supports the assumption of local parton-hadron duality, LPHD, at low hadron momentum.
  •  
6.
  • Abdallah, J, et al. (författare)
  • Determination of A(FB)(b) at the Z pole using inclusive charge reconstruction and lifetime tagging
  • 2005
  • Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044. ; 40:1, s. 1-25
  • Tidskriftsartikel (refereegranskat)abstract
    • A novel high precision method measures the b-quark forward-backward asymmetry at the Z pole on a sample of 3,560,890 hadronic events collected with the DELPHI detector in 1992 to 2000. An enhanced impact parameter tag provides a high purity b sample. For event hemispheres with a reconstructed secondary vertex the charge of the corresponding quark or anti-quark is determined using a neural network which combines in an optimal way the full available charge information from the vertex charge, the jet charge and from identified leptons and hadrons. The probability of correctly identifying b-quarks and anti-quarks is measured on the data themselves comparing the rates of double hemisphere tagged like-sign and unlike-sign events. The b-quark forward-backward asymmetry is determined from the differential asymmetry, taking small corrections due to hemisphere correlations and background contributions into account. The results for different centre-of-mass energies are: A(FB)(b) ( 89.449 GeV) = 0.0637 +/- 0.0143( stat.) +/- 0.0017( syst.), A(FB)(b) ( 91.231 GeV) = 0.0958 +/- 0.0032( stat.) +/- 0.0014( syst.), A(FB)(b) ( 92.990 GeV) = 0.1041 +/- 0.0115( stat.) +/- 0.0024( syst.). Combining these results yields the b-quark pole asymmetry A(FB)(b0) = 0.0972 +/- 0.0030( stat.) +/- 0.0014( syst.).
  •  
7.
  • Abdallah, J, et al. (författare)
  • Production of Xi(0)(c) and Xi(b) in Z decays and lifetime measurement of Xi(b)
  • 2005
  • Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; C:44, s. 299-309
  • Tidskriftsartikel (refereegranskat)abstract
    • The charmed strange baryon Xi(c)(0) was searched for in the decay channel Xi(c)(0) -> Xi(-)pi(+), and the beauty strange baryon Xi(b) in the inclusive channel Xi(b) -> Xi(-)l(-)(nu) over barX, using the 3.5 million hadronic Z events collected by the DELPHI experiment in the years 1992-1995. The Xi(-) was reconstructed through the decay AT, using a constrained fit method for cascade decays. An iterative discriminant analysis was used for the Xi(c)(0) and Xi(b) selection. The production rates were measured to be f(Xi c)(0) x BR(Xi(c)(0) -> Xi(-)pi(+) = (4.7 +/- 1.4(stat.) +/- 1.1(syst.)) x 10(-4) per hadronic Z decay, and BR(b -> Xi(b))xBR(Xi(b) -> Xi(-)l(-)X) = (3.0 +/- 1.0(stat.) +/- 0.3(syst.)) x 10(-4) for each lepton species (electron or muon). The lifetime of the Xi(b) baryon was measured to be tau(Xi b) = 1.45(-0.43)(+0.55)(stat.)+/- 0.13(syst.) ps. A combination with the previous DELPHI lifetime measurement gives tau(Xi b) = 1.48(-0.31)(+0.40)(stat.)+/- 0.12(syst.) ps.
  •  
8.
  • Abdallah, J, et al. (författare)
  • Search for eta(b) in two-photon collisions at LEP II with the DELPHI detector
  • 2006
  • Ingår i: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - : Elsevier BV. - 0370-2693 .- 1873-2445. ; 634:4, s. 340-346
  • Tidskriftsartikel (refereegranskat)abstract
    • The pseudoscalar meson eta(b) has been searched for in two-photon interactions at LEP II. The data sample corresponds to a total integrated luminosity of 617 pb(-1) at centre-of-mass energies ranging from 161 to 209 GeV. Upper limits at a confidence level of 95% on the product Gamma(gamma gamma) (eta(b)) x BR(eta(b)) are 190, 470 and 660 eV/c(2) for the eta(b) decaying into 4, 6 and 8 charged particles, respectively.
  •  
9.
  • An, W. W., et al. (författare)
  • Synthesis and surface characteristics of CeTbO3+delta induced by femtosecond laser irradiation
  • 2007
  • Ingår i: Applied Surface Science. - : Elsevier BV. - 1873-5584 .- 0169-4332. ; 253:8, s. 3884-3887
  • Tidskriftsartikel (refereegranskat)abstract
    • This work describes the use of focused, high-intensity light from a Ti: sapphire laser that generates femtosecond pulses to irradiate mixture of CeO2 and Tb4O7 under ambient conditions. The prepared samples were investigated by means of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electron microscope (SEM). XRD and XPS measurement results demonstrated that solid solution CeTbO3+delta with cubic fluorite structure has been synthesized on the irradiated target surface. SEM micrographs showed that the ultra-short laser irradiation resulted in the formation of foamy structure and spherical particles with size varying from about 30 to 200 nm. The formation mechanism has been discussed in detail. (c) 2006 Elsevier B.V. All rights reserved.
  •  
10.
  • Deng, X. H., et al. (författare)
  • Dynamics and waves near multiple magnetic null points in reconnection diffusion region
  • 2009
  • Ingår i: Journal of Geophysical Research. - : Blackwell Publishing. - 0148-0227 .- 2156-2202. ; 114:7
  • Tidskriftsartikel (refereegranskat)abstract
    • Identifying the magnetic structure in the region where the magnetic field lines break and how reconnection happens is crucial to improving our understanding of three-dimensional reconnection. Here we show the in situ observation of magnetic null structures in the diffusion region, the dynamics, and the associated waves. Possible spiral null pair has been identified near the diffusion region. There is a close relation among the null points, the bipolar signature of the Z component of the magnetic field, and enhancement of the flux of energetic electrons up to 100 keV. Near the null structures, whistler-mode waves were identified by both the polarity and the power law of the spectrum of electric and magnetic fields. It is found that the angle between the fans of the nulls is quite close to the theoretically estimated maximum value of the group-velocity cone angle for the whistler wave regime of reconnection.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-10 av 10

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy